I was trying to create a 11g database on linux using dbca.
At very end "create database" I got 'The file pach +DATADG/orcl/system01.dbf in invalid. Check the permissions.'
How to check the permission?
we are running oracle database 11.2.0.3 and tomcat on the same machine(SLES 11).
I need to contol tomcat(start/stop) depending to database status. For example, if database stops or become standby then to stop tomcat service.
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
I have installed asm lib and asm instance has started successfully and is working if i am using
EXPORT ORACLE_SID=+ASM
but if I am using DBCA after that to create database on ASM activated disk group I am having problem in creation of spfile. How to follow steps to create database using already installed /mounted disk group with DBCA.
I was using DBCA to create database in 11g. It goes to the last step ,but was not able to show up database creation screen. I am running it on AIX.
View 1 Replies View RelatedWhy there is default table such as AQ$_INTERNET and other table when I create database with DBCA I want to create commplete blank database
View 4 Replies View Relatedi am new to linux os . the step by step process of oracle database 10gR2 and oracle 10g client installation in linux os
View 6 Replies View RelatedI try to install RAC with 2 nodes OEL 5.8.
GI 11.2.0 is installed...The installation of the database crashed in dbca.
When I tried to rerun, I got: PRCD-1121: Speciffied server pool RAC for RAC is already hosting an administrator-managed configuration for database(s) RAC
we need to take care of all the components in a RAC Database 11g rel 2 . what is the sequence of stopping RAC database ? databsae ?? ASM ??? listeners ??? cluster services ??? commands and also sequence to start / stop ...and to check status of each components
View 2 Replies View RelatedI am using 10.2.0.1 on OEL5. I have installed CRS, Oracle home, ASM on both nodes and everything is fine.
When invoked dbca to create a database, it says:
*'DBCA could not startup the ASM instance configured on this node. To proceed with database creation using ASM you need the ASM instance to be up and running. Do you want to recreate the ASM instance on this node?'*
Is it a bug? because some blogs say this is a bug. And patch 8288940 will solve this. They also say this patch is to solve the incompatibility between 11g ASM incompatibility with 10g. But here I am using everything of 10.2.0.1.
We have 3 databases with version 10.2.0.3.0 running on RHEL AS 4.5 32 bit operating system. We are planning to move these databases to RHEL 64 bit Operating system.
let me know the highest 64 bit RHEL version supported by these databases(10.2.0.3). Will it support with RHEL 5.5 64 bit version?
I successfully installed clusterwares in 2 nodes but when i installled Oracle 11g Rel 2 (11.2.0.1) RAC database in Oracle linux 5.4 64bit, all the prerequisites are failed. I dont understand why all the prerequisties are failed,
Both nodes are working fine, i used all basics command to check the clusters, but why the database installation prerequisties are failed.
OS=Redhat 5
Oracle=11gr2
Grid=11gR2
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.
I am installing RAC on my Laptop using VM ware workstation . I have created two linux machines on VM ware with 1 gb merory on each machine . I installed 10.2.0.1 clusterware successfully but when i am installing 10.2.0.1 database binaries my machine reboot every time .
View 3 Replies View RelatedI have installed Oracle virtual box on windows host and have created Oracle Linux virtual machine as guest. I have installed the database server on my host machine but rest of the things(Peoplesoft peopletools etc....) on Oracle Linux guest.Now, I am trying to installed database client on guest machine which is Linux so that I can connect to DB server running on host, but having difficulties in doing so.
, I am following the installation instruction given in the doc docs.oracle.com/cd/E11882_01/install.112/e24322.pdf, but when I finally run command runInstaller.sh doesn't happen anything.Actually, to install other software's I just double clicked the .sh file and it automatically started the installation process on a terminal window but when I clicked runInstaller.sh to install DB client, it didn't do anything.
Also, when I run the same command runInstaller.sh from command line after navigating to the directory where this file is present, It throws me error saying "no command found".By the way, why the steps given in doc are so complex, I wish If I could just double click runInstaller.sh just like others and it start the installation process.
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
I am running oracle linux 5.7 on VMware Workstation 9 and trying to install Grid 11gr2, during installation my system freezes and I see out of memory errors. Actually Java installer is eating up too much memory over 1gb. Is there a way ? I can limit memory usage by Java process to a certain extent ?
View 1 Replies View RelatedI am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedI am facing a issue on DBCA Installation, when i tried from off-shore.
a. When Iam connecting a server using production / Model VPN , and try to start Installing DBCA Using X11-Forwarding of putty,
b. DBCA installation Started but its tooo Slow, it takes more than 3Hrs (Started at 9AM and ends at 11.17AM)
c. First time it fails and second time its went to success, Whereas when i take alog of server ping request - I am getting a frequent "Requested time out" due to network fluctuation.
So let me know is the network fluctuation affects the Installation through VPN, if So how to overcome and is any workaround on that ?
I installed oracle 11g on fedora 14 64 bit. i followed the instructions from the oracle docs. successfully installed. even the scripts ran. but when i try to execute dbca command. it says command not found. im in the oracle user acc.
View 10 Replies View RelatedIam facing a issue on DBCA Installation, when i tried remotely from off-shore. Steps I followed
a. I Connected a onsite desktop through a remote desktop connection (RDP) by using Corp-VPN from off-shore.
b. In the Remote Desktop, again by using production / Model VPN , connected the server which i need to Install DBCA
c. Using X11-Forwarding of putty, Started the DBCA installation.
d. Applied all the Parameters and on Finally clicking Finish to Start the database Creation, Finish button not responding and i can't continue the DBCA Installation.
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedI'm trying to install Oracle10g in win7 Home premium. It is installing but problem is when installation process trying to create database on the system, a message is appearing which telling that ORA-12546:TNS:permission denied.
View 1 Replies View RelatedI am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedI am learning to create an ASM (Automatic Storage Management) instance using dbca.
View 3 Replies View Related