am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
A link which describe step by step with screen shots how can i install oracle 10 r2 on oracle linux server release 6.1 using vmware workshop 8.my actual os is windows server 64 bit in this in install vmware 8 and i install oracle linux server release 6.1 32 bit now i want to install oracle 10g r2 or oracle 11g r2 on this .
View 2 Replies View RelatedCan I use 64 bit OS (Solaris x86) in my PC with VMware. As many software available in 64 bit but not in 32bit.
If I install 64 bit OS , Oracle DB whether it can crash the system or not
I have a question: Did someone have in production two or more RAC 11gR2 on different Solaris LDOMs on the same physical server?.
View 0 Replies View RelatedDuring installation of Oracle RAC 11g r1 on Linux using VMware server for Two Nodes, all the pre cluster installation test was successful, and execution of root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
View 3 Replies View Relatedwe are running oracle database 11.2.0.3 and tomcat on the same machine(SLES 11).
I need to contol tomcat(start/stop) depending to database status. For example, if database stops or become standby then to stop tomcat service.
I was trying to create a 11g database on linux using dbca.
At very end "create database" I got 'The file pach +DATADG/orcl/system01.dbf in invalid. Check the permissions.'
How to check the permission?
I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
I want to install an active / passive Oracle Configuration for our new 11gR2 system. We do not want to go full blown RAC as yet. We already have an 11gR2 instance that I plan to CLONE to the production server(s).
So. detail the steps that I need to follow .
i.e.
configure the 2 servers (VIFs/Interconnects)
Install GRID/CRS
Clone over the database (do I do this as a SINGLE NODE RAC?)
my host os is win 7 ,,,,i install vm ware and install linux on vmware...now i want to ping linux from win 7...how i can do it... firwall is disable.
[root@lnxdb ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
#
Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:0C:29:22:FC:FF
[code]...
i want to ping the guest os linux install on vmware to os win7 host ...how?
I am having 2 data centers within 1/2 km distance. And we kept each vote disk in once site. In case of site failure, the cluster needs a 3rd set. We don't have 3rd site.
Last open world, Oracle announced that oracle storage on cloud as announced. If I get the small space on the cloud, can i put my 3rd vote disk on the cloud?
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI am trying to install Oracle 10g RAC clusterware on RHEL-ES-4 using vmware. everything works properly till the time root.sh on second node.
I am getting the below error.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
After googling this topic, I found I have to check this first below
This particular case is caused by the OS init system does not working.
" Failure at final check of Oracle CRS stack.10" means CRS daemon did not startup during 600 seconds period.In the root.sh script, it adds CRS related entry in /etc/inittab, run "init q" and expect 3 CRS related daemon processes to start, eg:
init.cssd
init.crsd
init.evmd
With init system problem, none of these daemon processes are spawned, this causes CRS process startup failure as they rely on the CRS daemon processes to start first.
This can be verified by adding a simple entry in /etc/inittab:
test:2:once:/usr/bin/echo "HELLO TEST" > /tmp/test.log
run "init q" as root user. If the init is working, then there should be a file /tmp/test.log generated.
According to above I am not able to generate this file.
We are having major differences in performance when accessing an Oracle 11gR2 database from two different environments.
I won't sadden you with the gory details of the full application but I will use an indicative example of our problem.
We have SQL Developer in both environments. In each of these SQL Developer instances is a defined a connection to the same database on another machine. So there is the PC looking at a database and a virtual instance looking at the same database.
Selecting the '+' sign next to 'tables' for that connection, on the PC the list of four tables comes back in 4 seconds but on the virtual instance the list of the same four tables comes back in 1 minute and 50 seconds.
This sort of timing issue is repeatable for all accesses to the Oracle database on the third machine.
Provide me the link for the download of AIX 32 bit operating system ISO file as I need this for VMWARE. I have searched the IBM sites for this but to no avail.
View 1 Replies View Relatedjust now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working .
below are my .profile details.
# Set up the shell variables:
EDITOR=vi
export EDITOR
### Set the umask
umask 022
### Set ulimit
[code].....
Migrating the LIVE server to a NEW virtual machine.2 databases reside on the LIVE server, one runs in archivelog mode &other no archivelog modeOld server-Windows 2003 32 bit, oracle databases 11.1.0.7.0New-Windows 2008 64 bit,Oracle databases should be 11.2.0.3.0Just want to clarify the following1)When installing oracle, what would be the best option-create and configure a database / install software only(later create database using dbca) ?why? Just want to know if there will be a difference at all in these 2 methods.2)What is the best way to migrate the data in the database, datapump or rman (rman takes full backup in the present "live" so this can be moved to "new live" and can be recovered)? What would be the method with least downtime?(Once the data is transferred, the database in the "old server"will be deleted)3)The structure of the data files (folder path) are going to be different in the old and new servers, so I have to precreate the tablespaces, so will the impdp fail in this case?
View 1 Replies View RelatedI want to install Oracle EE 11gR2 on my Windows 7 Professional 64-bit laptop. Installed memory is 8GB.I need to install 32-bit server since Oracle Warehouse Builder will not run on a 64-bit o/s. Further, I use Toad 9.7.2 which will only recognise client 32-bit.
I had a few failed attempts, especially when the database was being created with the ORA-12560: TNS:protocol adapter error,
So here's what I did:
Changed C:WindowsSystem32driversetchosts so that it contains two lines 127.0.0.1 localhost & ::1 localhost
Changed properties of setup.exe in the installation directory to be Windows XP SP2 compatible and run as administrator
Selected "install database software only" (so I could figure out at what step the installation fails)
Selected "single instance"
Selected "Enterprise Edition"
Selected oracle base "c:app" (instead of default location c:appd_seng)
Copy of files was completed successfully, log file was created in c:program files(x86)oracleinventorylogs & registry entries were added to "HKEY_LOCAL_MACHINESOFTWAREWow6432NodeORACLE" (with keys KEY_OraDb11g_home1, ODP.NET & OracleMTSRecoveryService), and the following services were created:
OracleMTSRecoveryService: Started/Automatic
OracleOraDb11g_home1ClrAgent: Not started/Manual
OracleRemExecService: Started/Disabled
There are no listener.ora & tnsnames.ora yet. Sqlnet.ora is created with the line SQLNET.AUTHENTICATION_SERVICES = (NTS)
Now I went to Start, All Programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Net Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it. I selected "Listener Configuration", added a listener called LISTENER, TCP protocol, port 1521 and finished. A service called "OracleOraDb11g_home1TNSListener" was created and started in automatic mode. The PATH was updated and listener.ora was created with the lines:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:appproduct11.2.0dbhome_1)
[code]...
Tnsnames.ora is also creaed with the contents:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
At the command prompt, lsnrctl.status shows:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:42
:19
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 15-APR-2012 12:37:54
[code]...
At the command prompt, lsnrctl.services shows: LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:43:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully Now I went to start, all programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Database Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it.
I chose to create a databaseGeneral purpose Global database name ORCL SID ORCL Chose "Configure Enterprise Manager" & "Configure Database Control for local management" and disabled "Automatic maintenance tasks" Used the same password for all accounts
Selected storage type "File System" & "Use Database File Locations from Template" Unchecked Flash Recovery & Archiving Selected "Sample Schemas", "Typical" memory size (1228MB), "Use Automatic Memory Management" Left sizing/character sets/connection mode as default, and Selected "Generate Database Creation Scripts" in C:appadminORCLscripts (if I choose to Create Database, it fails with TNS Protocol Adapter Error).
I now open ORCL.bat in an editor, go to command prompt, create the directories as per the file, set ORACLE_SID=ORCL & path.
Running C:appproduct11.2.0dbhome_1inoradim.exe -new -sid ORCL -startmode manual -spfile gives a message "instance created" & services "OracleJobSchedulerORCL", "OracleVssWriterORCL" (started) & "OracleServiceORCL" (started) are created.
The next step C:appproduct11.2.0dbhome_1inoradim.exe -edit -sid ORCL -startmode auto -srvcstart system give an error "Unable to start service, OS Error 1056" (probably implies services already running), nothing is present in the windows alert logs about this. If I stop the service OracleVssWriterORCL, then this command completes, although no messages are returned.
The next step in the batch file starts sqplus /nolog and calls ORCL.sql.
ORCL.sql accepts passwords for sys, system, sysman & dbsnmp. It then executes host C:appproduct11.2.0dbhome_1inorapwd.exe file=C:appproduct11.2.0dbhome_1databasePWDORCL.ora force=y, which prompts me for the password for sys.
ORCL.sql then calls CloneRmanRestore.sql, which then tries to run connect "SYS"/"&&sysPassword" as SYSDBA
This is when I get the error ORA-12560: TNS:protocol adapter error, which has been haunting me for days.
My gut feel is that the database creation step at sqlplus is unable to recognise the listener...or probably it does not recognise the modified registry location (with Wow6432Node), the file oracle.key in C:appproduct11.2.0dbhome_1BIN shows the string SOFTWAREORACLEKEY_OraDb11g_home1.
I then changed oracle.key to point to SOFTWAREWow6432NodeORACLEKEY_OraDb11g_home1, restarted the listener and ORCL service, but connecting as sys returns the same error.
RAC installation on vmware is failing with following errors. I followed below link for installation. URL..... Found the following errors:
[root@rac2 ~]# cd /crs/oracle/bin/
[root@rac2 bin]# ./vipca
PRKR-1062 : Failed to find configuration for node rac1
PRKR-1062 : Failed to find configuration for node rac1
[code]....
The "/crs/oracle/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.The "/crs/ oracle/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
[root@rac2 bin]# /crs/oracle/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200
[root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
[root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View Relatedwe are busy updating one databasee from a windows platform 2003 oracle 10G to a linux and oracle 11r2
We exported/imported the data and it looks ok Explain plans look the same . but our heavy batches are twice slower than on the windows box ,the two top events are disk related, sequential and scattered reads there are 90% of the time of the batch job , i read some white paper and found that using ASM can be bad in some cases the same with the linux for this particular kind of scattered reads , i was just wondering if just changing the SGA to 10GB instead of 4GB to get more cache and speedup the things .
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedWe have 2 node cluster with 10.2.0.4 home and 11.2.0.2 home under 11gr2 grid infrastructure with ASM in LINUX environment. We are planning to add 3rd node to this cluster. Is there any issues to add 3rd node to existing environment or running fine.
View 2 Replies View RelatedQuestion: to migrate from oracle 10gR2 in Windows to oracle 11gR2 in Linux . Steps are:
1. need to expdp all schemas/users from oracle 10gR2 in Windows,
2. then impdp each schema/user into oracle 10gR2 in Linux first,
3. then upgrade the oracle 10gR2 in Linux to oracle 11gR2 in Linux ?
4. Do I need to pre-create all the same tablespaces first in oracle 10gR2 in Linux ?
Is it correct ? or I can migrate straight all schemas/users from oracle 10gR2 in Windows to oracle 11gR2 in Linux using impdp ?
I need to setup Oracle 11gR2 single node @ Linux RHat 5 64-bit for long performance tests, huge loads, high speeds, a lot of transactions, having a good scalability, etc.
It's not a production server, but for strong system/volume tests.
CPU
Motherboard
Memory
HDD
Network
We are using Oracle 11gr2,centos linux.
In the OWB mapping,I needed to transfer data in lob table1 to lob table2 .Both tables are in 2 different schema.The table1 has blob and clob columns.The table 2 has same structure like table 1 and the table 2 is empty.
I have created the mapping and connected directly from the source table to the target table.Also , I have created a error table for the target table table. As for the data rule method,I customized the error table to log the non unique rows.
When I start validating the mapping . I got the following error
VLD-3200 Deduplicator cannot contain LOB type columns
How to log the error in error table for transferring lob type table1 to lob type table 2