I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 RepliesI'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
INS-20802 Grid Infrastructure Failed
Cause:Plugin failed
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
./runcluvfy.sh stage -pre crsinst -n oradbprd016,oradbprd022 -fixup -verbose
These are the errors...
Check: TCP connectivity of subnet "192.168.99.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
c-oradb003av:192.168.99.32 oradbprd016:192.168.99.32 failed
ERROR:
PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed
c-oradb003av:192.168.99.32 oradbprd022:192.168.99.235 failed
ERROR:
PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd022 : 192.168.99.235" failed
Result: TCP connectivity check failed for subnet "192.168.99.0"
The physical hostnames of the servers are c-oradb003av and c-oradb005av In which they are aliases as follows in the /etc/hosts files.
# c-oradb003av
192.168.99.32 c-oradb003av.corppvt.com c-oradb003av
192.168.99.32 oradbprd016.corppvt.com oradbprd016
192.168.99.243 oradbvip016.corppvt.com oradbvip016
192.168.100.18 oradbpri016.corppvt.com oradbpri016
192.168.103.18 oradbrep016.corppvt.com oradbrep016
[code]....
it would say it is failing between the physical hostname and the alias which are using the same ip address?
PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed (it's the same address?)
when i install grid,the program stop at "loading setup dirver",this 's the log file.
Using paramFile: /u02/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 3431 MB Passed
Checking swap space: must be greater than 150 MB. Actual 20479 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/u02/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.30.03/1/DataFiles/*.jar -d /tmp/OraInstall2013-05-30_07-35-51PM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui/lib/linux64
-Doracle.installer.oui_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui
[code]....
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.
1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat, hc_+ASM1.dat, init.ora, orapw+ASM four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,
2) +DATA diskgroup has been created while grid installation, but when i try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup; name state DATA Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege.
3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1 then creat diskgroup.
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
[code]..
I am running oracle linux 5.7 on VMware Workstation 9 and trying to install Grid 11gr2, during installation my system freezes and I see out of memory errors. Actually Java installer is eating up too much memory over 1gb. Is there a way ? I can limit memory usage by Java process to a certain extent ?
View 1 Replies View RelatedI am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedI am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedWe're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I got huge problem trying to install grid infrastructure and oracle db. Separately oracle db works fine and installation is going without any problems as for grid not so much.
i got vmware host 4.1 with several vm's on top. One of them i openfiler which gives 2 luns for installation. Two other vm's are host of windows 2008r2(comes only 64bits i know that many of you know but just to be clear). Those two windows should be connected in oracle cluster and should have one oracle db afterwards. I have already AD domain, free disks and all required staff arranged and prepared.
I wont bodder you ppl about previous problems but current one is that i have no clue what's going wrong. I got two logs file which i paste below but there's no error message just some warning which isn't described even properly as for me.
Attached File(s)
installtion_logs.zip ( 66.62K )
Number of downloads: 0
I need some professional article about how to configure DNS for using Oracle GNS with explanation.
I want to understand the role of DNS server for GNS.
I tried to search but what I found is not enough or they are not written with accuracy.
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies.
View 2 Replies View RelatedI have been reading a lot of documentation regarding oracle services and I have an ok understanding of how they work. However, I have a general question regarding configuring services using Oracle RAC. For instance, if I have a 2 node oracle 11GR2 RAC on a Linux Redhat server. I have an application that connects to a service I have created. I create the service as follows.
srvctl add service -d ORCL_RAC -s APP_SERVICE -r ORCL_RAC1,ORCL_RAC2
The tnsnames contains:
APP_OLTP =
(DESCRIPTION =
(LOAD_BALANCE = ON)
(FAILOVER = ON)
[code]...
My questions are as follows:
1) When I do a 'srvctl status service -d ORCL_RAC', should I see the service running on both nodes of the RAC? Or does it run only one node, then it will fail over to the other when needed?
2) If I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 is only running on node1 and RAC_SRV2 is only running on node2. There are two applications sharing the same database, one application is using RAC_SRV1 and the other application is using RAC_SRV2. Am I correct in thinking that there is no failover available here? If node1 goes down, the application connecting to RAC_SRV1 will not be able to connect to node2 right?
3) In the case of the scenario in question 2 above, would it be best practise to simply create one service and have both applications connecting to the one service? Could I configure the one service to point connections from one application to node1 and connections from the other application to node2?
We are in process of upgrading 10g (RAC) database to 11g(RAC), does the oracle client software must also be upgraded to 11g or the 10g client can be used for 11g database connectivity, since there are thousands of end users it is very difficult to upgrade all the clients.What is the best approach for client software?
View 3 Replies View Relatedinstall oracle clusterware on Windows Operating system
View 4 Replies View RelatedWhile adding new oracle 11g R2 rac node on solaris 10, getting below error.
Checking user equivalence...
PRVF-4007 : User equivalence check failed for user "grid"
Check failed on nodes:
sr3
[code]...
I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
I would like to know that when the private network in oracle rac down, which is the preferable node in the cluster (cluster of 2 nodes) to takeover the cluster.
Can I set/get the failover policy to point to one node in the cluster?
I want to install an active / passive Oracle Configuration for our new 11gR2 system. We do not want to go full blown RAC as yet. We already have an 11gR2 instance that I plan to CLONE to the production server(s).
So. detail the steps that I need to follow .
i.e.
configure the 2 servers (VIFs/Interconnects)
Install GRID/CRS
Clone over the database (do I do this as a SINGLE NODE RAC?)
After installing a 4 node cluster 11.2.0.3 with 16 CPU's (4 on each node) on IBM 795 with aix 6.1 each server is using 0.5 CPU with no user load on the system. Running SIHA on one server typically uses 0.05 CPU with no user load on the system.
View 5 Replies View RelatedI tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.
[URL]
Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.
Quote:filename = /tmp/.GsdDisplayed
INFO: Query Returned: false
INFO: Calling Action fileActions10.2.0.6.0 appendStringToFile
source = /u01/app/11.2.0/grid/install/cluster.ini
stringToAppend = [cluster_info]
cluster_name=rac-scan
[code]....
OS=Redhat 5
Oracle=11gr2
Grid=11gR2
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.