I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
I tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.
[URL]
Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies.
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
************************************* [root@bsfrac01 grid]# sh root.sh Running Oracle 11g root.sh script...
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name 2011-02-13 00:11:55: Checking for super user privileges 2011-02-13 00:11:55: User has super user privileges
I got huge problem trying to install grid infrastructure and oracle db. Separately oracle db works fine and installation is going without any problems as for grid not so much.
i got vmware host 4.1 with several vm's on top. One of them i openfiler which gives 2 luns for installation. Two other vm's are host of windows 2008r2(comes only 64bits i know that many of you know but just to be clear). Those two windows should be connected in oracle cluster and should have one oracle db afterwards. I have already AD domain, free disks and all required staff arranged and prepared.
I wont bodder you ppl about previous problems but current one is that i have no clue what's going wrong. I got two logs file which i paste below but there's no error message just some warning which isn't described even properly as for me.
Attached File(s)
installtion_logs.zip ( 66.62K ) Number of downloads: 0
I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.
1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat, hc_+ASM1.dat, init.ora, orapw+ASM four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,
2) +DATA diskgroup has been created while grid installation, but when i try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup; name state DATA Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege.
3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1 then creat diskgroup.
We install grid using Grid Installer GUI. When doing a fresh installation of Grid Infrastructure 11.2.0.2 or 11.2.0.3 in a new server , I want to apply its latest PSU as well. When should I do this PSU patching ?
A. Should I apply the GI PSU after the entire Grid installation is successfully completed ?
or
B. Should I apply the GI PSU just before running the root.sh ?
i.e. when the installer prompts you to run root.sh (see the screenshot below)
[URL].........
At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?Should I follow option A or B above ?
Share 11g Release 2 Grid infrastructure and RAC installation experience on Sun SPARC. Any documentation which provide complete information from server setup to database setup.
I'm trying to install Grid Infrastructure for Oracle RAC 11g. I followed each step of pre installation tasks, but when I run run Installer it blocks without any error message.
What I see on my shell is this: ./runInstaller Avvio di Oracle Universal Installer in corso...
Verifica dello spazio Temp: deve essere maggiore di 120 MB. Effettivi 17276 MB Superato Verifica dello spazio di swap: deve essere maggiore di 150 MB. Effettivi 23999 MB Superato Verifica del monitor: deve essere configurato per visualizzare almeno 256 colori. Effettivo 16777216 Superato Preparazione per l'avvio di Oracle Universal Installer da /tmp/OraInstall2012-01-11_03-35-57AM. Attendere...[oracle@ssts2cora1 grid]$
Everything seems ok. But the window of oracle installation does not appear. The java process is active:
but it does nothing!! Nothing appears to me. I attach the log file generated by the installation process.
Using paramFile: /home/software_ssts/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 17276 MB Passed Checking swap space: must be greater than 150 MB. Actual 23999 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/home/software_ssts/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-01-11_03-35-57AM Verr� utilizzato il valore di umask '022' disponibile in oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java, and the argv is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux -Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/home/software_ssts/grid/install -Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre [code].......
i try to install oracle grid infrastructure 11r2 on cent OS 4.8 on vmware workstation 8.0.2..ASM disk is not showing ,i had also change disk discovery path to 'ORCL:*'i had already configure ASM disk using /etc/init.d/oracleasm createdisk...successfully..
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
We have a two node 11.2.0.3 Grid Infra cluster running on SLES11 Linux. Everything is ok with the SCAN and standard listeners.
However we have a listener running on each node which is used by Oracle Gateway. These listeners were created manually using info provided by Oracle (i.e. definition copied to $ORACLE_HOME/network/admin/listener.ora and started using lsnrctl). This all works.
These listeners are currently not managed by Grid Infra. We would like them to be.
I thought this was easy enough using srvctl to register them with Grid Infra using...
These commands worked but did give a warning stating that the -n flag is deprecated and will be ignored.
This has left us with the following listener config....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1 Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode2 Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
You can see that Grid Infra knows about the listeners but they are available on both nodes. What we would like is a result like the following example....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
i.e one listener registered with just the node it is running on. This used to be possible with using the -n flag but no longer works.
I am trying for 11gR2 3 node RAC ASM on windows 2003-64-bit. I am using one SCAN ip ,placed in /etc/hosts file.I am not using DNS/GNS. Same thing done(/etc/hosts) on other nodes also.
I have run the cluvfy.bat prior to grid software install and passed very well. When i tried to install Grid Software,at prerequisites i got error as "node connectivity".
Even i ignored this error and run the finish.After moving grid software to remote nodes ,it throws error as " [INS-20802] Grid Infrastructure Configuration failed ".
It specified one log,which i am attaching here. In network side ,the ping is ok to all the nodes.
Here i am attaching the error screen shots and error log file.
I have raised SR with Oracle ,but not able to identify the root cause of this problem.I will post the solution once i got from oracle.
I've noticed that the backup files produced by RMAN (Database is 11.2.0.2.0 Enterprise Edition) )on a RHEL5.5. server which is running ASM have group permissions assigned to ASMADMIN (so the file permissions are assigned to ORACLE:ASMADMIN) as opposed to OINSTALL or any other group.
While this is not an issue (it's not currently impacting us in any way) I'm curious as to how and why this happens. I suspect it is related to the fact that the oracle executable has these permissions also but I can't find any material to confirm my suspicion.
I'm trying to install Oracle 11gR2 RAC on AIX, do we need to turn on Multicasting, can we install without multicasting? Also can I have the ASM disk with external redundancy for OCR and Voting Disk?
I would like to use Oracle Grid Infrastructure to protect a single-instance database.
I found these docs:
[URL]
I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?
At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases
Yesterday I was installing 11.2.0.2 patch to our Oracle 11gR2(11.2.0.1.0) Two node RAC cluster on OEL 5.4 x86 Linux.Before installing I have read [URL] support note which says "Note: All Oracle Grid Infrastructure patch set upgrades must be out-of-place upgrades, in which you install the patch set into a new Grid home. In-place patch set upgrades are not supported. "
During Installation I found following Installation Option :
1) Install and configure Oracle grid Infrastructure for a cluster
2) Configure Oracle Grid Infrastructure for a Standalone Server
3) Upgrade Oracle Grid Infrastructure or Oracle Automatic Storage Management
4) Install Oracle Grid Infrastructure Software Only
I am trying to install oracle 11gR2 64-bit on windows XP 64-bit Operating System, after the completion of the steps where I have to enter the path for the ORACLE BASE and other parameters when I click next and then Finish, I receive an error, you can check in the attachment.
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
i have installed oracle 11gr2 on centos 4.7,,but after that when i invoke command for startup in sqlplus for sys user it shows an insufficient privileges error. and what are the post installation tasks? is the database installed also?what is the name of database and where is it?