I'm trying to install Grid Infrastructure for Oracle RAC 11g. I followed each step of pre installation tasks, but when I run run Installer it blocks without any error message.
What I see on my shell is this: ./runInstaller Avvio di Oracle Universal Installer in corso...
Verifica dello spazio Temp: deve essere maggiore di 120 MB. Effettivi 17276 MB Superato Verifica dello spazio di swap: deve essere maggiore di 150 MB. Effettivi 23999 MB Superato Verifica del monitor: deve essere configurato per visualizzare almeno 256 colori. Effettivo 16777216 Superato Preparazione per l'avvio di Oracle Universal Installer da /tmp/OraInstall2012-01-11_03-35-57AM. Attendere...[oracle@ssts2cora1 grid]$
Everything seems ok. But the window of oracle installation does not appear. The java process is active:
but it does nothing!! Nothing appears to me. I attach the log file generated by the installation process.
Using paramFile: /home/software_ssts/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 17276 MB Passed Checking swap space: must be greater than 150 MB. Actual 23999 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/home/software_ssts/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-01-11_03-35-57AM Verr� utilizzato il valore di umask '022' disponibile in oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java, and the argv is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux -Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/home/software_ssts/grid/install -Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre [code].......
i try to install oracle grid infrastructure 11r2 on cent OS 4.8 on vmware workstation 8.0.2..ASM disk is not showing ,i had also change disk discovery path to 'ORCL:*'i had already configure ASM disk using /etc/init.d/oracleasm createdisk...successfully..
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
I got huge problem trying to install grid infrastructure and oracle db. Separately oracle db works fine and installation is going without any problems as for grid not so much.
i got vmware host 4.1 with several vm's on top. One of them i openfiler which gives 2 luns for installation. Two other vm's are host of windows 2008r2(comes only 64bits i know that many of you know but just to be clear). Those two windows should be connected in oracle cluster and should have one oracle db afterwards. I have already AD domain, free disks and all required staff arranged and prepared.
I wont bodder you ppl about previous problems but current one is that i have no clue what's going wrong. I got two logs file which i paste below but there's no error message just some warning which isn't described even properly as for me.
Attached File(s)
installtion_logs.zip ( 66.62K ) Number of downloads: 0
I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
************************************* [root@bsfrac01 grid]# sh root.sh Running Oracle 11g root.sh script...
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name 2011-02-13 00:11:55: Checking for super user privileges 2011-02-13 00:11:55: User has super user privileges
I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies.
I tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.
[URL]
Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.
I try to install the Grid Control 10.2.0.5 on Solaris 10 in an existing (empty) Database Oracle 10.2.0.4. All steps work without problems except
-- OMS Configuration (in Configutaion Assistants)
emca_repos_create15_25_32.log :
Quote: java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271) at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:647) [code].......
ORA_NLS10 is set to $ORACLE_HOME/nls/data of DB
Also tried to set to $ORACLE_HOME/nls/data of oms10g but get Problems to start opmn and later on it report also ORACLE_HOME and NLS Parameter set incorrectly. I checked MetaLink / Internet without success.
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. CRS-4256: Updating the profile
I am having issue with IMPDP on ORACLE VIRTUAL COLUMNS.I am having following table with Virtual column defined with Not null. Expdp is fine without any issue.
DDL : ------ CREATE TABLE alert_hist ( alertky INTEGER NOT NULL, alertcreatedttm TIMESTAMP(6) DEFAULT systimestamp NOT NULL, alertcreatedt DATE GENERATED ALWAYS AS (To_date(Trunc("alertcreatedttm"))) VIRTUAL NOT NULL
When I do the import (IMPDP) it got failed with the following error.
. . imported "TESTSCHEMA"."VALART" 359.1 KB 4536 rows ORA-31693: Table data object "TESTSCHEMA"."ALERT_HIST" failed to load/unload and is being skipped due to error: ORA-39097: Data Pump job encountered unexpected error -1
After that I dropped the Virtual Not null column and recreated that column with Nullable.
DDL : ----- alter table alert_hist drop column alertcreatedt; alter table alert_hist add alertcreatedt DATE GENERATED ALWAYS AS (To_date(Trunc("alertcreatedttm"))) VIRTUAL;
After that I took the expdp and impdp , it went fine with out any issue.
We have a two node 11.2.0.3 Grid Infra cluster running on SLES11 Linux. Everything is ok with the SCAN and standard listeners.
However we have a listener running on each node which is used by Oracle Gateway. These listeners were created manually using info provided by Oracle (i.e. definition copied to $ORACLE_HOME/network/admin/listener.ora and started using lsnrctl). This all works.
These listeners are currently not managed by Grid Infra. We would like them to be.
I thought this was easy enough using srvctl to register them with Grid Infra using...
These commands worked but did give a warning stating that the -n flag is deprecated and will be ignored.
This has left us with the following listener config....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1 Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode2 Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
You can see that Grid Infra knows about the listeners but they are available on both nodes. What we would like is a result like the following example....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
i.e one listener registered with just the node it is running on. This used to be possible with using the -n flag but no longer works.
I am trying for 11gR2 3 node RAC ASM on windows 2003-64-bit. I am using one SCAN ip ,placed in /etc/hosts file.I am not using DNS/GNS. Same thing done(/etc/hosts) on other nodes also.
I have run the cluvfy.bat prior to grid software install and passed very well. When i tried to install Grid Software,at prerequisites i got error as "node connectivity".
Even i ignored this error and run the finish.After moving grid software to remote nodes ,it throws error as " [INS-20802] Grid Infrastructure Configuration failed ".
It specified one log,which i am attaching here. In network side ,the ping is ok to all the nodes.
Here i am attaching the error screen shots and error log file.
I have raised SR with Oracle ,but not able to identify the root cause of this problem.I will post the solution once i got from oracle.
I've noticed that the backup files produced by RMAN (Database is 11.2.0.2.0 Enterprise Edition) )on a RHEL5.5. server which is running ASM have group permissions assigned to ASMADMIN (so the file permissions are assigned to ORACLE:ASMADMIN) as opposed to OINSTALL or any other group.
While this is not an issue (it's not currently impacting us in any way) I'm curious as to how and why this happens. I suspect it is related to the fact that the oracle executable has these permissions also but I can't find any material to confirm my suspicion.
i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.
1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat, hc_+ASM1.dat, init.ora, orapw+ASM four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,
2) +DATA diskgroup has been created while grid installation, but when i try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup; name state DATA Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege.
3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1 then creat diskgroup.
We install grid using Grid Installer GUI. When doing a fresh installation of Grid Infrastructure 11.2.0.2 or 11.2.0.3 in a new server , I want to apply its latest PSU as well. When should I do this PSU patching ?
A. Should I apply the GI PSU after the entire Grid installation is successfully completed ?
or
B. Should I apply the GI PSU just before running the root.sh ?
i.e. when the installer prompts you to run root.sh (see the screenshot below)
[URL].........
At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?Should I follow option A or B above ?
I would like to use Oracle Grid Infrastructure to protect a single-instance database.
I found these docs:
[URL]
I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?
At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases
I am trying to install Oracle client 11G software in AIX box. In /home/oracle, I find 7 profile files. I am not sure which profile file I am supposed to consider.
With just the ip address available, how to install the oracle 11g software on windows 7? What are the access I will need in order to Install the oracle 11g software and create the oracle 11g database on windows 7?
I want to install oracle 11.2.0.2 single instance database on AIX 6.1, does oracle recommend separate OS user for grid infrastructure and for oracle install? how many groups I need to have for these users like oinstall, dba etc?
I need to install Oracle 10g in windows 7 home premium which version of oracle 10g will work better with Windows 7 home premium. I need to download «& install.
We just got a new Dell R720 server that will host our Oracle DB. The server hasn't even been turned on yet but we know that the load on the server will be very low for a long time.
One of our problems is that we need to run a VERY important application. Since it is not very resource consuming compared to it's importance we chose to run it on a not so new Xeon 5110 1.60 GHz - 4GB RAM server. He said it's not a good idea and that we should buy a new server. (money is very low)
The software vendor suggested to virtualize our R720 server, host a vm running our database, and along with it other smaller machines like the one I described above. I suggested the use of Oracle VM, Oracle Linux for the database host and transforming the physical servers servers in VM with P2V.
Our IT Manager didn't like that, he said that it's not recommended to run a database on a virtual machine. But our software vendor said that many of their clients run their solution this way.
