Installation Grid Infrastructure / Oracle DB

Mar 18, 2012

I got huge problem trying to install grid infrastructure and oracle db. Separately oracle db works fine and installation is going without any problems as for grid not so much.

i got vmware host 4.1 with several vm's on top. One of them i openfiler which gives 2 luns for installation. Two other vm's are host of windows 2008r2(comes only 64bits i know that many of you know but just to be clear). Those two windows should be connected in oracle cluster and should have one oracle db afterwards. I have already AD domain, free disks and all required staff arranged and prepared.

I wont bodder you ppl about previous problems but current one is that i have no clue what's going wrong. I got two logs file which i paste below but there's no error message just some warning which isn't described even properly as for me.

Attached File(s)

installtion_logs.zip ( 66.62K )
Number of downloads: 0

View 2 Replies


ADVERTISEMENT

RAC/ASM Clusterware Installation :: Oracle Grid Infrastructure

Jan 28, 2013

I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error

INS-20802 Grid Infrastructure Failed
Cause:Plugin failed

View 4 Replies View Related

RAC & Failsafe :: Oracle 11gR2 Installation - Grid Infrastructure

Apr 18, 2011

I have some confusions regarding to 11gR2 RAC installation:

- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.

View 2 Replies View Related

RAC & Failsafe :: Oracle 11g R2 Grid Infrastructure Installation Stuck On 65%?

Mar 15, 2011

I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies.

View 2 Replies View Related

RAC & Failsafe :: Oracle 11gR2 Grid Infrastructure Installation Hung At 65% Of Completion

Jul 4, 2013

I tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.

[URL]

Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.

Quote:filename = /tmp/.GsdDisplayed
INFO: Query Returned: false
INFO: Calling Action fileActions10.2.0.6.0 appendStringToFile
source = /u01/app/11.2.0/grid/install/cluster.ini
stringToAppend = [cluster_info]
cluster_name=rac-scan

[code]....

View 3 Replies View Related

RAC/ASM Clusterware Installation :: How To Install Grid Infrastructure 11.2.0.3 On AIX 6.2

May 22, 2013

I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...

./runcluvfy.sh stage -pre crsinst -n oradbprd016,oradbprd022 -fixup -verbose

These are the errors...

Check: TCP connectivity of subnet "192.168.99.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
c-oradb003av:192.168.99.32 oradbprd016:192.168.99.32 failed

ERROR:

PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed
c-oradb003av:192.168.99.32 oradbprd022:192.168.99.235 failed

ERROR:

PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd022 : 192.168.99.235" failed
Result: TCP connectivity check failed for subnet "192.168.99.0"

The physical hostnames of the servers are c-oradb003av and c-oradb005av In which they are aliases as follows in the /etc/hosts files.

# c-oradb003av
192.168.99.32 c-oradb003av.corppvt.com c-oradb003av
192.168.99.32 oradbprd016.corppvt.com oradbprd016
192.168.99.243 oradbvip016.corppvt.com oradbvip016
192.168.100.18 oradbpri016.corppvt.com oradbpri016
192.168.103.18 oradbrep016.corppvt.com oradbrep016

[code]....

it would say it is failing between the physical hostname and the alias which are using the same ip address?

PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed (it's the same address?)

View 3 Replies View Related

RAC/ASM Clusterware Installation :: Grid Infrastructure / Don't Get Any Instance Specific ASM Parameter

Oct 3, 2013

 i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.

1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat,  hc_+ASM1.dat,  init.ora,  orapw+ASM  four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,  

2)  +DATA diskgroup has been created while grid installation, but when i  try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs     (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup;   name  state    DATA    Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege. 

3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1  then creat diskgroup.

View 5 Replies View Related

Real Application Clusters :: PSU Patching And Grid Infrastructure Installation

Jun 25, 2012

GRID version: 11.2.0.3 , 11.2.0.2
Platform : AIX 6.1

We install grid using Grid Installer GUI. When doing a fresh installation of Grid Infrastructure 11.2.0.2 or 11.2.0.3 in a new server , I want to apply its latest PSU as well. When should I do this PSU patching ?

A. Should I apply the GI PSU after the entire Grid installation is successfully completed ?

or

B. Should I apply the GI PSU just before running the root.sh ?

i.e. when the installer prompts you to run root.sh (see the screenshot below)

[URL].........

At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?Should I follow option A or B above ?

View 1 Replies View Related

Possible To Install Oracle Grid Infrastructure

Jan 11, 2012

I'm trying to install Grid Infrastructure for Oracle RAC 11g. I followed each step of pre installation tasks, but when I run run Installer it blocks without any error message.

What I see on my shell is this:
./runInstaller
Avvio di Oracle Universal Installer in corso...

Verifica dello spazio Temp: deve essere maggiore di 120 MB. Effettivi 17276 MB Superato
Verifica dello spazio di swap: deve essere maggiore di 150 MB. Effettivi 23999 MB Superato
Verifica del monitor: deve essere configurato per visualizzare almeno 256 colori. Effettivo 16777216 Superato
Preparazione per l'avvio di Oracle Universal Installer da /tmp/OraInstall2012-01-11_03-35-57AM. Attendere...[oracle@ssts2cora1 grid]$

Everything seems ok. But the window of oracle installation does not appear. The java process is active:

[oracle@ssts2cora1 grid]$ ps -ef | grep java
oracle 4553 1 0 03:35 pts/0 00:00:00 /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux -Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/home/software_ssts/grid/install -Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre -Doracle.installer.nlsEnabled="TRUE" -Doracle.installer.prereqConfigLoc= -Doracle.installer.unixVersion=2.6.32-100.34.1.el6uek.x86_64 -mx150m -cp
[code]....

but it does nothing!! Nothing appears to me. I attach the log file generated by the installation process.

Using paramFile: /home/software_ssts/grid/install/oraparam.ini

Checking Temp space: must be greater than 120 MB. Actual 17276 MB Passed
Checking swap space: must be greater than 150 MB. Actual 23999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed

The commandline for unzip:

/home/software_ssts/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-01-11_03-35-57AM
Verr� utilizzato il valore di umask '022' disponibile in oraparam.ini

Execvp of the child jre : the cmdline is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/home/software_ssts/grid/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre
[code].......

View 2 Replies View Related

RAC & Failsafe :: Oracle Grid Infrastructure Configure Failed

Feb 15, 2011

i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.

*************************************
[root@bsfrac01 grid]# sh root.sh
Running Oracle 11g root.sh script...

The following environment variables are set as:

ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/grid

Enter the full pathname of the local bin directory: [/usr/local/bin]:

Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...

Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.

2011-02-13 00:11:55: Parsing the host name
2011-02-13 00:11:55: Checking for super user privileges
2011-02-13 00:11:55: User has super user privileges

[code]....

View 1 Replies View Related

Server Administration :: Getting Error When Install Oracle Grid Infrastructure On Virtual Box RHL 5.5

Aug 6, 2013

When trying to install Oracle Grid Infrastructure on Virtual Box RHL 5.5 (2.6.18-194.el5 kernel) machine it gives error.

Quote:$ Xlib:connection to ":0.0" refered by server
Xlib:No protocol specified

Exception in thread "main" java.lan.NoClassDefFoundError

at java.lan.Class.forName0(Native Method)
..........at oracle.install.ivw.crs.driver.CRSInstaller.main(CRSIntaller.java:103)

View 7 Replies View Related

Automatic Storage Management :: Disk Is Not Displaying - Install Oracle Grid Infrastructure 11r2?

Jul 1, 2012

i try to install oracle grid infrastructure 11r2 on cent OS 4.8 on vmware workstation 8.0.2..ASM disk is not showing ,i had also change disk discovery path to 'ORCL:*'i had already configure ASM disk using /etc/init.d/oracleasm createdisk...successfully..

View 8 Replies View Related

RAC/ASM Clusterware Installation :: Oracle Grid 11g R2 Installation

Jul 11, 2013

I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download? 

View 2 Replies View Related

Where To Download 11gr2 Grid Infrastructure For Windows

Mar 26, 2013

I am not seeing the software of Oracle 11gR2 grid infra structure for Windows. What is the link to download the grid infra structure for Windows.

View 3 Replies View Related

Clusterware :: Add Listener To Grid Infrastructure Using Srvctl

Jan 14, 2013

We have a two node 11.2.0.3 Grid Infra cluster running on SLES11 Linux. Everything is ok with the SCAN and standard listeners.

However we have a listener running on each node which is used by Oracle Gateway. These listeners were created manually using info provided by Oracle (i.e. definition copied to $ORACLE_HOME/network/admin/listener.ora and started using lsnrctl). This all works.

These listeners are currently not managed by Grid Infra. We would like them to be.

I thought this was easy enough using srvctl to register them with Grid Infra using...

srvctl add listener -n mynode1 -l LISTENER_MYNODE1_GW -o $ORACLE_HOME -p 1529
srvctl add listener -n mynode2 -l LISTENER_MYNODE2_GW -o $ORACLE_HOME -p 1529

These commands worked but did give a warning stating that the -n flag is deprecated and will be ignored.

This has left us with the following listener config....

grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode
Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1
Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1
Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode1
Listener LISTENER_MYNODE2_GW is not running on node(s): mynode1

grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode
Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode2
Listener LISTENER_MYNODE1_GW is not running on node(s): mynode2
Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2
Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2

You can see that Grid Infra knows about the listeners but they are available on both nodes. What we would like is a result like the following example....

grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode
Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1
Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1

grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode
Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2
Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2

i.e one listener registered with just the node it is running on. This used to be possible with using the -n flag but no longer works.

View 2 Replies View Related

INS-20802 - Grid Infrastructure Configuration Failed?

Sep 26, 2010

I am trying for 11gR2 3 node RAC ASM on windows 2003-64-bit. I am using one SCAN ip ,placed in /etc/hosts file.I am not using DNS/GNS. Same thing done(/etc/hosts) on other nodes also.

I have run the cluvfy.bat prior to grid software install and passed very well. When i tried to install Grid Software,at prerequisites i got error as "node connectivity".

Even i ignored this error and run the finish.After moving grid software to remote nodes ,it throws error as " [INS-20802] Grid Infrastructure Configuration failed ".

It specified one log,which i am attaching here. In network side ,the ping is ok to all the nodes.

Here i am attaching the error screen shots and error log file.

I have raised SR with Oracle ,but not able to identify the root cause of this problem.I will post the solution once i got from oracle.

View 1 Replies View Related

RMAN :: Output File Permissions With ASM / Grid Infrastructure

Jul 10, 2013

I've noticed that the backup files produced by RMAN (Database is 11.2.0.2.0 Enterprise Edition) )on a RHEL5.5. server which is running ASM have group permissions assigned to ASMADMIN (so the file permissions are assigned to ORACLE:ASMADMIN) as opposed to OINSTALL or any other group.

While this is not an issue (it's not currently impacting us in any way) I'm curious as to how and why this happens. I suspect it is related to the fact that the oracle executable has these permissions also but I can't find any material to confirm my suspicion.

View 2 Replies View Related

Clusterware :: Can Use Grid Infrastructure 11.2 To Protect A Single Instance Database

Oct 12, 2012

I would like to use Oracle Grid Infrastructure to protect a single-instance database.

I found these docs:

[URL]

I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?

At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases

View 4 Replies View Related

RAC/ASM Clusterware Installation :: OEM Grid Control Files For Oracle Database 10gR2

Jan 22, 2013

I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide

I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux

Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....

I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.

View 2 Replies View Related

Enterprise Manager :: OEM Grid Installation

Nov 11, 2008

I am getting one error message while installing this OEM grid control in existing DB. this error come at last in configuration step. This is the error stack:

Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Done.
Creating EM Schema ... Failed.
Repository Creation failed. Failed to create repository schema.
Configuration assistant "Enterprise Manager Repository Creation Assistant" failed
--------
I am using oracle 10.1.0.3.0 on Windows XP.

what this error means? or any way that complete without it and later create manually.

View 1 Replies View Related

Oracle11g R1 Grid Control Installation Error

Apr 18, 2011

In Oracle 11g grid control installation error OMS configuration failed:

DB s/w: Oracle DataBase 11g R2

OS : Windows Xp sp2

Grid s/w: Oracle 11g Grid Control R1

Weblogic Server : wls 10.3.4.0

As i did follow the oracle 11g grid control basic installation guide. i got error in oms configuration stage ....

Apr 18, 2011 7:28:58 PM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Done Executing the command...0
Apr 18, 2011 7:28:58 PM oracle.sysman.omsca.framework.OMSGenericAdapter deleteAddOnInventory
INFO: Invoking deleteAddOnInventory for oms null
Apr 18, 2011 7:28:58 PM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Stopping WebTier

[code]....

View 2 Replies View Related

Enterprise Manager :: Grid Control Installation - 10g

Aug 3, 2011

which i can install Grid Control For my 10g databases.

View 2 Replies View Related

RAC & Failsafe :: 11G Release 2 Grid And RAC Installation On Solaris 10

Nov 24, 2010

Share 11g Release 2 Grid infrastructure and RAC installation experience on Sun SPARC. Any documentation which provide complete information from server setup to database setup.

View 2 Replies View Related

RAC/ASM Clusterware Installation :: Grid Error At Setup?

May 30, 2013

when i install grid,the program stop at "loading setup dirver",this 's the log file.

Using paramFile: /u02/grid/install/oraparam.ini

Checking Temp space: must be greater than 120 MB. Actual 3431 MB Passed
Checking swap space: must be greater than 150 MB. Actual 20479 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed

The commandline for unzip:
/u02/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.30.03/1/DataFiles/*.jar -d /tmp/OraInstall2013-05-30_07-35-51PM
Using the umask value '022' available from oraparam.ini

Execvp of the child jre : the cmdline is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui/lib/linux64
-Doracle.installer.oui_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui

[code]....

View 2 Replies View Related

Enterprise Manager :: Data Guard Installation At Grid

Jul 11, 2012

I configured EM grid control(11g) and install agent.when I configured standby database by data guard I got error messages.examine and correct the following error(s), then re-try the operation.

Remote Operation Error - install_driver(Oracle) failed: Can't load '/home/oracle/Oracle/Middleware/agent11g/perl/lib/site_perl/5.10.0/x86_64-linux-thread-multi/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: /home/oracle/Oracle/Middleware/agent11g/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied at /home/oracle/Oracle/Middleware/agent11g/perl/lib/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203. at (eval 14) line 3 Compilation failed in require at (eval 14) line 3. Perhaps a required shared library or dll isn't installed where expected at
[code]....

View 1 Replies View Related

RAC/ASM Clusterware Installation :: Grid Install And Error (First Node Configuration Failed)?

Jan 26, 2013

I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:

clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile

[code]..

View 2 Replies View Related

RAC/ASM Clusterware Installation :: High Memory Usage By Grid / Database Installer

Oct 31, 2012

I am running oracle linux 5.7 on VMware Workstation 9 and trying to install Grid 11gr2, during installation my system freezes and I see out of memory errors. Actually Java installer is eating up too much memory over 1gb. Is there a way ? I can limit memory usage by Java process to a certain extent ?

View 1 Replies View Related

Infrastructure Hardware For Oracle EBS R12

Dec 15, 2010

We would like to deploy Oracle EBS R12 on HP Infrastructure.

how many servers do we need for Test and [b]Dev environments and what are the best practices for this deployment.

Note: we have >50 and <100 users.

View 2 Replies View Related

RAC/ASM Clusterware Installation :: ORA-03114 / Not Connected To ORACLE Error With Oracle DB Installation

Dec 3, 2012

I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.

View 25 Replies View Related

Grid / Real Application Clusters Grid Computing With RAC

Aug 12, 2010

(Oracle Grid & Real Application Clusters Oracle Grid Computing with RAC) from rampant tech press. I have already ordered it 3 months back and still have not received it as its not printed yet or as i am told is in press. I would be glad to have a copy soon if its published.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved