RAC/ASM Clusterware Installation :: Grid Error At Setup?
May 30, 2013
when i install grid,the program stop at "loading setup dirver",this 's the log file.
Using paramFile: /u02/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 3431 MB Passed
Checking swap space: must be greater than 150 MB. Actual 20479 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/u02/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.30.03/1/DataFiles/*.jar -d /tmp/OraInstall2013-05-30_07-35-51PM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui/lib/linux64
-Doracle.installer.oui_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. CRS-4256: Updating the profile
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
We are trying to set up a RAC blade server in which they are 2nodes and runs under Linux x86-64 machine. We will be installing 11.2.0.3. The ASM disk has been created and we are in stage of installtion of GRID software. During the GUI installation we are getting below error.
INS-06003: Failed to setup passwordless SSH connectivity with the following
The SSH are working fine when we do manually. But through GUI during installtion it is not. The port which we are using here for connectivity is 2222 instead of the default ports. As per the one of thread in OTN discussion I checked port specification of /etc/ssh/ssh_config file in both the servers. It is 2222.
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.
1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat, hc_+ASM1.dat, init.ora, orapw+ASM four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,
2) +DATA diskgroup has been created while grid installation, but when i try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup; name state DATA Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege.
3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1 then creat diskgroup.
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
I am running oracle linux 5.7 on VMware Workstation 9 and trying to install Grid 11gr2, during installation my system freezes and I see out of memory errors. Actually Java installer is eating up too much memory over 1gb. Is there a way ? I can limit memory usage by Java process to a certain extent ?
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
We are implementing a 2 node RAC configuration with ASM on vmware and openfiler on LINUX RHEL 6.2. We started our installation with grid infrastructure. While executing root.sh on node 1 it gives error diskgroup cannot be mounted and no alterntions perfomed as below.
+[main] [ 2012-10-04 05:38:33.150 PDT ] [UsmcaLogger.logException:173] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:mountDiskGroups+ +[main] [ 2012-10-04 05:38:33.151 PDT ] [UsmcaLogger.logException:174] ORA-15032: not all alterations performed+ ORA-15017: diskgroup "CRS" cannot be mounted
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node. Expected Value : n/a Actual Value : n/a List of errors: - Permissons of file "/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"] - Cause: Cause of Problem Not Available - Action: User Action Not Available.
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
We have a two node 11.2.0.3 Grid Infra cluster running on SLES11 Linux. Everything is ok with the SCAN and standard listeners.
However we have a listener running on each node which is used by Oracle Gateway. These listeners were created manually using info provided by Oracle (i.e. definition copied to $ORACLE_HOME/network/admin/listener.ora and started using lsnrctl). This all works.
These listeners are currently not managed by Grid Infra. We would like them to be.
I thought this was easy enough using srvctl to register them with Grid Infra using...
These commands worked but did give a warning stating that the -n flag is deprecated and will be ignored.
This has left us with the following listener config....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1 Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode2 Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
You can see that Grid Infra knows about the listeners but they are available on both nodes. What we would like is a result like the following example....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1 Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2 Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
i.e one listener registered with just the node it is running on. This used to be possible with using the -n flag but no longer works.
I would like to use Oracle Grid Infrastructure to protect a single-instance database.
I found these docs:
[URL]
I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?
At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
I have installed oracle 10g in D drive . The installation says it is successful, without asking the database name or the password . I have followed the steps given in the attached file .
However it is not asking the database name or password ( no configuration set up is appearing for the user to interact with the system ) . So, after installation I can not give the username and password .
We are planning to have new installation of 11GR2 and would like to create data guard for this system. I have one server in Houston and other in Austin TX. the OS will be Windows 2008 R2.
How can i set up data guard and what is the requirements?
I got huge problem trying to install grid infrastructure and oracle db. Separately oracle db works fine and installation is going without any problems as for grid not so much.
i got vmware host 4.1 with several vm's on top. One of them i openfiler which gives 2 luns for installation. Two other vm's are host of windows 2008r2(comes only 64bits i know that many of you know but just to be clear). Those two windows should be connected in oracle cluster and should have one oracle db afterwards. I have already AD domain, free disks and all required staff arranged and prepared.
I wont bodder you ppl about previous problems but current one is that i have no clue what's going wrong. I got two logs file which i paste below but there's no error message just some warning which isn't described even properly as for me.
Attached File(s)
installtion_logs.zip ( 66.62K ) Number of downloads: 0
I am getting one error message while installing this OEM grid control in existing DB. this error come at last in configuration step. This is the error stack:
Getting temporary tablespace from database... Found temporary tablespace: TEMP Checking SYS Credentials ... OK. Checking DB Init Parameters ... OK. Checking for Repos User ... Does not Exist. Loading necessary DB objects ... Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists. DBMS POOL package exists. Done Loading necessary DB objects Creating repos user ... Done. Creating EM Schema ... Failed. Repository Creation failed. Failed to create repository schema. Configuration assistant "Enterprise Manager Repository Creation Assistant" failed -------- I am using oracle 10.1.0.3.0 on Windows XP.
what this error means? or any way that complete without it and later create manually.
Is it possible to upgrade GI 11.2.0.1 Enterprise Edition version to 11.2.0.3 STANDARD EDITION?
We have 2 Node RAC with 10.2 DB SE. Last time I think by mistake or not knowing the licensing information GI was upgraded to EE 11.2.0.1 by somebody or may be whatever version of GI is used, it has nothing to do with the license?
I have heard that I can upgrade Grid Infrastructure, but to Standard Edition. Does GI also comes with SE and also just want to know that can I perform this upgrade?
I want to upgrade (out of place) Grid Infrastructure to latest version of 11.2.0.3 and then PSU on top of that.
GI HOME and DB HOME are separated. Database I want to upgrade later on, not with this clusterware upgrade. I have download p10404530_112030_Linux-x86-64_3of7.zip from MOS for upgrading GI.
grid@db1p [rec]: /home/grid > crsctl query crs softwareversion Oracle Clusterware version on node [db1p] is [11.2.0.1.0] grid@db1p [rec]: /home/grid > crsctl query crs activeversion Oracle Clusterware active version on the cluster is [11.2.0.1.0]grid@db1px [ec]: /home/grid > sqlplus / as sysasm
[code]....
1) Is this the correct p10404530_112030_Linux-x86-64_3of7.zip to upgrade GI from 11.2.0.1 to 11.2.03?
2) Do I need a COMPLETE DOWNTIME to upgrade GI on 2 node RAC where DB is STANDARD EDITION but Clusterware is 11.2 as you have seen above..
3) Will this ASM version will also be upgraded along with GI upgrade installer or it must be upgrades separately after GI Upgrade?
When I use 'ONSCTL PING' to test the ons status, it says: configure localport and remoteport directives and attempt to start ONS server again.ons is not running.The content of D:app11.2.0gridopmnconfons.config is:
localport=6100 # line added by Agent allowgroup=true usesharedinstall=true remoteport=6200 # line added by Agent nodes=rac1:6200,rac2:6200 # line added by Agent
The content of D:app11.2.0gridopmnconfons.config.rac2 is: localport=6100 # line added by Agent allowgroup=true usesharedinstall=true remoteport=6200 # line added by Agent nodes=rac1:6200,rac2:6200 # line added by Agent
The configuration file is almost the same in rac1.But the output of 'srvctl status nodeapps' is :
ons is enabled ons is running on node1:rac1 ons is running on node2:rac2
