We are planning to have new installation of 11GR2 and would like to create data guard for this system. I have one server in Houston and other in Austin TX. the OS will be Windows 2008 R2.
How can i set up data guard and what is the requirements?
[oracle@localhost Desktop]$ netca Oracle Net Services Configuration: # An unexpected error has been detected by HotSpot Virtual Machine: # SIGSEGV (0xb) at pc=0xa23ae762, pid=7422, tid=3075933888 # Java VM: Java HotSpot™ Server VM (1.5.0_17-b02 mixed mode) # Problematic frame: # C [libclntsh.so.11.1+0x429762] snlinGetAddrInfo+0x1b2
An error report file with more information is saved as hs_err_pid7422.log
#If you would like to submit a bug report, {URL}...
when i install grid,the program stop at "loading setup dirver",this 's the log file.
Using paramFile: /u02/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 3431 MB Passed Checking swap space: must be greater than 150 MB. Actual 20479 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip: /u02/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.30.03/1/DataFiles/*.jar -d /tmp/OraInstall2013-05-30_07-35-51PM Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java, and the argv is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui/lib/linux64 -Doracle.installer.oui_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui
I am trying to install oracle 11gR2 64-bit on windows XP 64-bit Operating System, after the completion of the steps where I have to enter the path for the ORACLE BASE and other parameters when I click next and then Finish, I receive an error, you can check in the attachment.
I work as a Sys. Admin. for several RHEL 3.8 servers, most of them are clusters of 2 machines. All these servers are running Oracle 9.2.0.7 database. They are running fine on a separate filesystem. So everytime the system has to be formatted for some particular reason, there is no need to re-install the database.
I am trying to make some tests by running the same filesystem containing the oracle database in a fresh Red Hat Enterprise Linux 4.8 X86_64 Install. This task has become impossible, and I'm not quite sure why.
I installed all the compat- packages required for a fresh oracle 9 install in a RHEL4 machine, but at the time of stating the STARTUP sentence, it gives me the next error:
CMCLI ERROR: OpenCommPort: connect failed with error 2. CMCLI ERROR: OpenCommPort: connect failed with error 2. CMCLI ERROR: OpenCommPort: connect failed with error 2. CMCLI ERROR: OpenCommPort: connect failed with error 2. CMCLI ERROR: OpenCommPort: connect failed with error 2.
After this error (repeated) it says something like: Cannot start an already running database.... But if i stat a shutdown sentence, it says that the instance has not been initialized....
I don't know whether i have to re-install all the oracle software in order to make a clean install in the new kernel version or not, i tried to apply a patch, and the oracle installer recognized the installation i had.
I think it might be because the original system is configured to work as a cluster, and i'm running it on only a virtual machine.
I am working on SLES 11 SP2 on zLinux and I am trying to install oracle 11gr2 silently. I was able to install the GI and it is running but when I try to install the oracle binaries I keep getting this error:
[FATAL] [INS-32035] Unable to create a new central inventory directory : /opt/oraInventory. CAUSE: The central inventory location provided is not empty.
The GI install created /opt/oraInventory and all the files are in there. I even changed the owner from grid:oinstall to oracle:oinstall but that did not work. When I did the install on SLES 11 SP1 I did not get this error.
It isn't possible to use one EC2 machine for each RAC node because EC2 can't handle the virtual IPs, but I had thought that I could use one EC2 machine to host several Linux VMs using Virtual Box (the same way that I use Virtual Box on a Windows host). But I can't get Virtual Box working on EC2. The only relevant advice I can find on this is comments to the effect that running any virtualization product with a Xen machine as host is not a good idea.
I do realize that this isn't a 100% Oracle question, but if set up a RAC on an Amazon Cloud machine,
I have a Host system of windows 8, installed the Virtual Box Latest edition.The guest OS is the oracle Linux that came with the Pre-Built Developer VMs from Oracle.The VM is set to HOST ONLY network setting. Now, the thing is that i want to access the Oracle in the guest machine from my windows host machine.the guest OS shows the IP address as 192.168.56.101. I can ping the IP address from the HOST machine, but cannot connect theSQL developer to the oracle in the guest OS from the host machine. It keeps on saying the Network adapter cannot connect. do not say that install the oracle in window itself. I actually want to do the same on my macbook pro as that is my primary machine.
In my Organization I am trying to install oracle ODTwithODAC112030 but one Error showing that is java virtual machine could not find main class program will Exit.
Server Configuration Dell power Edge r510 Windows 2003 64 bit serv PAck 2 Citrix Presentation server 4.5 .
I need to setup Oracle 11gR2 single node @ Linux RHat 5 64-bit for long performance tests, huge loads, high speeds, a lot of transactions, having a good scalability, etc.
It's not a production server, but for strong system/volume tests.
I have a new laptop with windows 8 installed. I tried installing Oracle Virtual Box. But I am unable to install OEL on top of that. How to do installations on Windows 8. If so, what are the compatible versions of OEL and Virtual Box?
I have just installed Virtual Box 4.2.16 for Windows hosts to my Windows 7 laptop. I created virtual machine and installed Oracle Linux 6.4. Now I want to have this virtual Linux OS on the existing network. My Windows 7 is part of this network.
Let's say, my Windows 7 machine's IP address is 10.11.5.46. I want to set 10.11.5.201 to this virtual Linux OS and make it ping able from both way (host - guest). To do this, I used Bridged Adapter. I selected Intel(R) 82567LM Gigabit Network Connection. I believe this is LAN adapter of my actual host machine. Then also I setup network to the virtual Linux OS, such as static IP address, subnet mask, and default gateway. Then I rebooted the virtual machine.
Now, any machines on the network, including my Windows 7 host machine, can ping to my virtual Linux OS (10.11.5.201), but from virtual Linux OS can't ping to any machine on the network, except for default gateway. Also from virtual Linux I can't get to the Internet via Fire Fox browser.
I have installed oracle 10g in D drive . The installation says it is successful, without asking the database name or the password . I have followed the steps given in the attached file .
However it is not asking the database name or password ( no configuration set up is appearing for the user to interact with the system ) . So, after installation I can not give the username and password .
We are trying to set up a RAC blade server in which they are 2nodes and runs under Linux x86-64 machine. We will be installing 11.2.0.3. The ASM disk has been created and we are in stage of installtion of GRID software. During the GUI installation we are getting below error.
INS-06003: Failed to setup passwordless SSH connectivity with the following
The SSH are working fine when we do manually. But through GUI during installtion it is not. The port which we are using here for connectivity is 2222 instead of the default ports. As per the one of thread in OTN discussion I checked port specification of /etc/ssh/ssh_config file in both the servers. It is 2222.
I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location.
But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path. It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors.
I am installing RAC on my Laptop using VM ware workstation . I have created two linux machines on VM ware with 1 gb merory on each machine . I installed 10.2.0.1 clusterware successfully but when i am installing 10.2.0.1 database binaries my machine reboot every time .
I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
i have installed oracle 11gr2 on centos 4.7,,but after that when i invoke command for startup in sqlplus for sys user it shows an insufficient privileges error. and what are the post installation tasks? is the database installed also?what is the name of database and where is it?
I want to install an active / passive Oracle Configuration for our new 11gR2 system. We do not want to go full blown RAC as yet. We already have an 11gR2 instance that I plan to CLONE to the production server(s).
So. detail the steps that I need to follow .
i.e. configure the 2 servers (VIFs/Interconnects) Install GRID/CRS Clone over the database (do I do this as a SINGLE NODE RAC?)
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
Migrating the LIVE server to a NEW virtual machine.2 databases reside on the LIVE server, one runs in archivelog mode &other no archivelog modeOld server-Windows 2003 32 bit, oracle databases 11.1.0.7.0New-Windows 2008 64 bit,Oracle databases should be 11.2.0.3.0Just want to clarify the following1)When installing oracle, what would be the best option-create and configure a database / install software only(later create database using dbca) ?why? Just want to know if there will be a difference at all in these 2 methods.2)What is the best way to migrate the data in the database, datapump or rman (rman takes full backup in the present "live" so this can be moved to "new live" and can be recovered)? What would be the method with least downtime?(Once the data is transferred, the database in the "old server"will be deleted)3)The structure of the data files (folder path) are going to be different in the old and new servers, so I have to precreate the tablespaces, so will the impdp fail in this case?