Installation :: Oracle Database 11gR2 On Virtual Box on Windows 32bits Machine
Oct 31, 2013I have an issue during the database configuration using DBCA at 85% it blocs, then it displays an error asking to reconfigure ORACLE_UNQNAME.
View 6 Replies
ADVERTISEMENT
Installation :: 11gr2 Setup Shows Error On Virtual Machine
Jun 4, 2013I have a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit.
When I install Oracle Database 11gR2 and click on "SETUP" file, a message box namely JAVA VIRTUAL MACHINE LAUNCHER and display below error;
_"Could not find the main class. Program will exit."_
Same setup runs successfully on my server with Windows Server 2008 Enterprise.
Is it 11gr2 supports a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit ? or some other?
Windows :: Oracle 10g On Virtual Machine 2003 X64
Jul 9, 2010Does already installed Oracle 10g (10.2.0.1) on a windows 2003 server x64? Do you notice strange behaviors, any errors after the installation?
Does already installed Oracle 10g on a windows virtual machine? Are there any prerequisites?
RAC/ASM Clusterware Installation :: Virtual IP For Oracle 11gr2 Cluster?
Sep 8, 2012I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
Client Tools :: How To Configure SQL DEVELOPER Via Virtual Machine Oracle Database
Mar 21, 2012i have oel installed on my parallel Virtual machine.
i have a problem with configuring sql developer to the oracle database which is located in my virtual machine.
my os is windows7 32 bit.
Windows :: Oracle 11gR2 64-bit On XP - Error While Installation
Aug 9, 2010I am trying to install oracle 11gR2 64-bit on windows XP 64-bit Operating System, after the completion of the steps where I have to enter the path for the ORACLE BASE and other parameters when I click next and then Finish, I receive an error, you can check in the attachment.
View 11 Replies View RelatedInstallation :: Oracle 10g Client Install Skips - Windows 7 Machine
Nov 15, 2013I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location.
But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path. It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors.
Windows :: Installation Of Oracle 11gR2 - Error In Trace File
Apr 8, 2013I am trying to install Oracle 11g R2(64bit) on Windows 7 64 bit OS. While Creating Database using DBCA. I am getting error. Below is the screenshot.
Below is the error in the Trace file...
oracle.sysman.assistants.util.step.StepExecutionException:
Error in Process: C:Oracleapporacleproduct11.2.0serverinorapwd.exe
Unable to find error file %ORACLE_HOME%RDBMSopw<lang>.msb
Server Administration :: Installation Of Oracle 11gR2 On Windows 7 64-bit Fails With ORA-12560?
Apr 15, 2012I want to install Oracle EE 11gR2 on my Windows 7 Professional 64-bit laptop. Installed memory is 8GB.I need to install 32-bit server since Oracle Warehouse Builder will not run on a 64-bit o/s. Further, I use Toad 9.7.2 which will only recognise client 32-bit.
I had a few failed attempts, especially when the database was being created with the ORA-12560: TNS:protocol adapter error,
So here's what I did:
Changed C:WindowsSystem32driversetchosts so that it contains two lines 127.0.0.1 localhost & ::1 localhost
Changed properties of setup.exe in the installation directory to be Windows XP SP2 compatible and run as administrator
Selected "install database software only" (so I could figure out at what step the installation fails)
Selected "single instance"
Selected "Enterprise Edition"
Selected oracle base "c:app" (instead of default location c:appd_seng)
Copy of files was completed successfully, log file was created in c:program files(x86)oracleinventorylogs & registry entries were added to "HKEY_LOCAL_MACHINESOFTWAREWow6432NodeORACLE" (with keys KEY_OraDb11g_home1, ODP.NET & OracleMTSRecoveryService), and the following services were created:
OracleMTSRecoveryService: Started/Automatic
OracleOraDb11g_home1ClrAgent: Not started/Manual
OracleRemExecService: Started/Disabled
There are no listener.ora & tnsnames.ora yet. Sqlnet.ora is created with the line SQLNET.AUTHENTICATION_SERVICES = (NTS)
Now I went to Start, All Programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Net Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it. I selected "Listener Configuration", added a listener called LISTENER, TCP protocol, port 1521 and finished. A service called "OracleOraDb11g_home1TNSListener" was created and started in automatic mode. The PATH was updated and listener.ora was created with the lines:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:appproduct11.2.0dbhome_1)
[code]...
Tnsnames.ora is also creaed with the contents:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
At the command prompt, lsnrctl.status shows:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:42
:19
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 15-APR-2012 12:37:54
[code]...
At the command prompt, lsnrctl.services shows: LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:43:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully Now I went to start, all programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Database Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it.
I chose to create a databaseGeneral purpose Global database name ORCL SID ORCL Chose "Configure Enterprise Manager" & "Configure Database Control for local management" and disabled "Automatic maintenance tasks" Used the same password for all accounts
Selected storage type "File System" & "Use Database File Locations from Template" Unchecked Flash Recovery & Archiving Selected "Sample Schemas", "Typical" memory size (1228MB), "Use Automatic Memory Management" Left sizing/character sets/connection mode as default, and Selected "Generate Database Creation Scripts" in C:appadminORCLscripts (if I choose to Create Database, it fails with TNS Protocol Adapter Error).
I now open ORCL.bat in an editor, go to command prompt, create the directories as per the file, set ORACLE_SID=ORCL & path.
Running C:appproduct11.2.0dbhome_1inoradim.exe -new -sid ORCL -startmode manual -spfile gives a message "instance created" & services "OracleJobSchedulerORCL", "OracleVssWriterORCL" (started) & "OracleServiceORCL" (started) are created.
The next step C:appproduct11.2.0dbhome_1inoradim.exe -edit -sid ORCL -startmode auto -srvcstart system give an error "Unable to start service, OS Error 1056" (probably implies services already running), nothing is present in the windows alert logs about this. If I stop the service OracleVssWriterORCL, then this command completes, although no messages are returned.
The next step in the batch file starts sqplus /nolog and calls ORCL.sql.
ORCL.sql accepts passwords for sys, system, sysman & dbsnmp. It then executes host C:appproduct11.2.0dbhome_1inorapwd.exe file=C:appproduct11.2.0dbhome_1databasePWDORCL.ora force=y, which prompts me for the password for sys.
ORCL.sql then calls CloneRmanRestore.sql, which then tries to run connect "SYS"/"&&sysPassword" as SYSDBA
This is when I get the error ORA-12560: TNS:protocol adapter error, which has been haunting me for days.
My gut feel is that the database creation step at sqlplus is unable to recognise the listener...or probably it does not recognise the modified registry location (with Wow6432Node), the file oracle.key in C:appproduct11.2.0dbhome_1BIN shows the string SOFTWAREORACLEKEY_OraDb11g_home1.
I then changed oracle.key to point to SOFTWAREWow6432NodeORACLEKEY_OraDb11g_home1, restarted the listener and ORCL service, but connecting as sys returns the same error.
Windows :: Unable To Start DBCONSOLE After Initial Installation Of Oracle 11gR2?
May 29, 2013unable to start the DBCONSOLE immediately after installing Oracle 11G R2 onto my Windows 7 box. Here is what I have ran from the command line:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userssandifer>emctl start dbconsole
Environment variable ORACLE_UNQNAME not defined. Please set ORACLE_UNQNAME to database unique name.
C:Userssandifer>SET ORACLE_HOSTNAME=localhost
[code].....
I checked the above listed file path, and sure enough, OC4J_DBConsole_localhost_orcl is missing.
Windows :: OEL Installation Using VM Virtual BOX On Win 8
Feb 5, 2013I have a new laptop with windows 8 installed. I tried installing Oracle Virtual Box. But I am unable to install OEL on top of that. How to do installations on Windows 8. If so, what are the compatible versions of OEL and Virtual Box?
View 2 Replies View RelatedInstallation :: Oracle 11G Database For 64 Bit Windows Installation Error
May 6, 2013I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
View 10 Replies View RelatedAccessing Oracle On VirtualBox From Host Virtual Machine?
Jul 18, 2013I have a Host system of windows 8, installed the Virtual Box Latest edition.The guest OS is the oracle Linux that came with the Pre-Built Developer VMs from Oracle.The VM is set to HOST ONLY network setting. Now, the thing is that i want to access the Oracle in the guest machine from my windows host machine.the guest OS shows the IP address as 192.168.56.101. I can ping the IP address from the HOST machine, but cannot connect theSQL developer to the oracle in the guest OS from the host machine. It keeps on saying the Network adapter cannot connect. do not say that install the oracle in window itself. I actually want to do the same on my macbook pro as that is my primary machine.
View 10 Replies View RelatedOracle 11g - Java Virtual Machine Could Not Find Main Class Program Will Exit
Jul 26, 2013In my Organization I am trying to install oracle ODTwithODAC112030 but one Error showing that is java virtual machine could not find main class program will Exit.
Server Configuration Dell power Edge r510 Windows 2003 64 bit serv PAck 2 Citrix Presentation server 4.5 .
Data Guard :: Setup - New Installation Of 11GR2 / OS Windows 2008 R2
Jun 8, 2011We are planning to have new installation of 11GR2 and would like to create data guard for this system. I have one server in Houston and other in Austin TX. the OS will be Windows 2008 R2.
How can i set up data guard and what is the requirements?
Networking And Gateways :: Oracle 11gR2 Database - Performance Difference Between Windows PC And On VMware
Feb 9, 2012We are having major differences in performance when accessing an Oracle 11gR2 database from two different environments.
I won't sadden you with the gory details of the full application but I will use an indicative example of our problem.
We have SQL Developer in both environments. In each of these SQL Developer instances is a defined a connection to the same database on another machine. So there is the PC looking at a database and a virtual instance looking at the same database.
Selecting the '+' sign next to 'tables' for that connection, on the PC the list of four tables comes back in 4 seconds but on the virtual instance the list of the same four tables comes back in 1 minute and 50 seconds.
This sort of timing issue is repeatable for all accesses to the Oracle database on the third machine.
Windows :: Installation Of Oracle Database 10g Or More
Nov 15, 2010I want to install any version of Oracle database in my laptop IBM Lenovo Y450 64 bit, but i have win 7 home, how to install it in win 7 home edition, one main thing i don't have money to upgrade it to windows 7 ultimate,
View 3 Replies View RelatedRAC/ASM Clusterware Installation :: Oracle 11GR2 Rac Installation In Vmware
Aug 28, 2013I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
Installation :: Oracle Database Client (32-bit) For Windows 7
Oct 25, 2012where to download - Oracle database client(32-bit) 11.2.0.3 for windows 7 ?
View 5 Replies View RelatedApplication Express :: Upgrade Within Oracle XE Database Installation On Windows 7
Aug 28, 2012O/S: Windows 7 64-bit
DB: Oracle XE 11g2 32-bit
APEX: 4.0.2
=============
Trying to upgrade APEX within an Oracle XE database installation on Windows 7. The version of APEX that came with Oracle XE is 4.0.2. Trying to upgrade to 4.1.1 and, from the SQL*Plus command-line (ie. the 'Run SQL Command' tool which comes with Oracle XE), I try to run @apexins.sql.
It starts to run momentarily, then the MS-DOS windows just closes. Can not find any install log to determine the cause.
Backup & Recovery :: Error While Backup On Windows 7 Client Of Oracle 11gR2 Database
May 2, 2011I have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log
Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
Testing 9i On Virtual Machine Under RHEL 4.8
Sep 1, 2010I work as a Sys. Admin. for several RHEL 3.8 servers, most of them are clusters of 2 machines. All these servers are running Oracle 9.2.0.7 database. They are running fine on a separate filesystem. So everytime the system has to be formatted for some particular reason, there is no need to re-install the database.
I am trying to make some tests by running the same filesystem containing the oracle database in a fresh Red Hat Enterprise Linux 4.8 X86_64 Install. This task has become impossible, and I'm not quite sure why.
I installed all the compat- packages required for a fresh oracle 9 install in a RHEL4 machine, but at the time of stating the STARTUP sentence, it gives me the next error:
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
After this error (repeated) it says something like: Cannot start an already running database.... But if i stat a shutdown sentence, it says that the instance has not been initialized....
I don't know whether i have to re-install all the oracle software in order to make a clean install in the new kernel version or not, i tried to apply a patch, and the oracle installer recognized the installation i had.
I think it might be because the original system is configured to work as a cluster, and i'm running it on only a virtual machine.
RAC/ASM Clusterware Installation :: Installing 10.2.0.1 Database Binaries Machine Reboot?
Dec 7, 2012I am installing RAC on my Laptop using VM ware workstation . I have created two linux machines on VM ware with 1 gb merory on each machine . I installed 10.2.0.1 clusterware successfully but when i am installing 10.2.0.1 database binaries my machine reboot every time .
View 3 Replies View RelatedRAC & Failsafe :: Using One EC2 Machine To Host Several Linux VMs Using Virtual Box
Dec 22, 2010How to get a RAC running in an EC2 environment?
It isn't possible to use one EC2 machine for each RAC node because EC2 can't handle the virtual IPs, but I had thought that I could use one EC2 machine to host several Linux VMs using Virtual Box (the same way that I use Virtual Box on a Windows host). But I can't get Virtual Box working on EC2. The only relevant advice I can find on this is comments to the effect that running any virtualization product with a Xen machine as host is not a good idea.
I do realize that this isn't a 100% Oracle question, but if set up a RAC on an Amazon Cloud machine,
Netca - Unexpected Error Has Been Detected By HotSpot Virtual Machine?
Sep 17, 2013 solving the error below?
[oracle@localhost Desktop]$ netca
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xa23ae762, pid=7422, tid=3075933888
# Java VM: Java HotSpot™ Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [libclntsh.so.11.1+0x429762] snlinGetAddrInfo+0x1b2
An error report file with more information is saved as hs_err_pid7422.log
#If you would like to submit a bug report, {URL}...
/u01/app/oracle/product/11.2.0/db_1/bin/netca: line 178: 7422 Aborted (core dumped) $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.net.ca.NetCA $*
Installation :: Oracle 11gR2 Install Through Response File
Sep 28, 2012How can i set db home name at the time of installation of oracle 11.2.O.3 .
View 3 Replies View RelatedRAC & Failsafe :: Oracle 11gR2 Installation - Grid Infrastructure
Apr 18, 2011I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
Post Installation Tasks On Oracle 11gR2 On Centos 4.7
Aug 24, 2012i have installed oracle 11gr2 on centos 4.7,,but after that when i invoke command for startup in sqlplus for sys user it shows an insufficient privileges error. and what are the post installation tasks? is the database installed also?what is the name of database and where is it?
View 5 Replies View RelatedClusterware :: Active / Passive Installation For Oracle 11gR2
Nov 20, 2012I want to install an active / passive Oracle Configuration for our new 11gR2 system. We do not want to go full blown RAC as yet. We already have an 11gR2 instance that I plan to CLONE to the production server(s).
So. detail the steps that I need to follow .
i.e.
configure the 2 servers (VIFs/Interconnects)
Install GRID/CRS
Clone over the database (do I do this as a SINGLE NODE RAC?)
Windows :: Installation Process Of Oracle 10g At Windows 7 Ultimate 32 Bit?
Feb 27, 2012can i install oracle 10g at windows 7 ultimate 32 bit
View 1 Replies View Related