I am installing RAC on my Laptop using VM ware workstation . I have created two linux machines on VM ware with 1 gb merory on each machine . I installed 10.2.0.1 clusterware successfully but when i am installing 10.2.0.1 database binaries my machine reboot every time .
View 3 RepliesHere we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
I try to install RAC with 2 nodes OEL 5.8.
GI 11.2.0 is installed...The installation of the database crashed in dbca.
When I tried to rerun, I got: PRCD-1121: Speciffied server pool RAC for RAC is already hosting an administrator-managed configuration for database(s) RAC
we need to take care of all the components in a RAC Database 11g rel 2 . what is the sequence of stopping RAC database ? databsae ?? ASM ??? listeners ??? cluster services ??? commands and also sequence to start / stop ...and to check status of each components
View 2 Replies View RelatedI successfully installed clusterwares in 2 nodes but when i installled Oracle 11g Rel 2 (11.2.0.1) RAC database in Oracle linux 5.4 64bit, all the prerequisites are failed. I dont understand why all the prerequisties are failed,
Both nodes are working fine, i used all basics command to check the clusters, but why the database installation prerequisties are failed.
I was trying to create a 11g database on linux using dbca.
At very end "create database" I got 'The file pach +DATADG/orcl/system01.dbf in invalid. Check the permissions.'
How to check the permission?
OS=Redhat 5
Oracle=11gr2
Grid=11gR2
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.
I have an issue during the database configuration using DBCA at 85% it blocs, then it displays an error asking to reconfigure ORACLE_UNQNAME.
View 6 Replies View RelatedI am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
I am running oracle linux 5.7 on VMware Workstation 9 and trying to install Grid 11gr2, during installation my system freezes and I see out of memory errors. Actually Java installer is eating up too much memory over 1gb. Is there a way ? I can limit memory usage by Java process to a certain extent ?
View 1 Replies View Relatedwe are having problem installing oracle 10g on windows 2008r2 64 bit on a HP ML110 G7 machine.
we have 10203_vista_w2k8_x64_production_db.zip
downloaded from oracle site.
I am setting a RAC on vmware follow:URL....And i have a problem in the last step when Installing Clusterware Software. Oracle Cluster Verification Utility failed. The problem is:
OCR itegrity found invalid for nodes: RAC2
OCR itegrity found valid for nodes: RAC1
I am trying to install Oracle 10g RAC clusterware on RHEL-ES-4 using vmware. everything works properly till the time root.sh on second node.
I am getting the below error.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
After googling this topic, I found I have to check this first below
This particular case is caused by the OS init system does not working.
" Failure at final check of Oracle CRS stack.10" means CRS daemon did not startup during 600 seconds period.In the root.sh script, it adds CRS related entry in /etc/inittab, run "init q" and expect 3 CRS related daemon processes to start, eg:
init.cssd
init.crsd
init.evmd
With init system problem, none of these daemon processes are spawned, this causes CRS process startup failure as they rely on the CRS daemon processes to start first.
This can be verified by adding a simple entry in /etc/inittab:
test:2:once:/usr/bin/echo "HELLO TEST" > /tmp/test.log
run "init q" as root user. If the init is working, then there should be a file /tmp/test.log generated.
According to above I am not able to generate this file.
Im trying to install Weblogic/Forms on a Windows 7 x86 machine. Its for the developers to use.But when I run the config.bat and is creating the domain and installing Forms builder and the other stuff the installation hangs at: step restaring admin server started.
Log:
Stopping Derby Server...
Starting AdminServer
Starting the domain ...
DEBUG : Loading the 32 bit dll here
DEBUG : Loading DLL : D:/oracle/middleware/as_1/install/config/StartUtil.dll
DEBUG : Loaded DLL : D:/oracle/middleware/as_1/install/config/StartUtil.dll
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I 'm trying restore database 11GR1 on other host with 11GR2.Using this steps:
>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Fri Jul 27 09:00:32 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target sys/password@PRD
Recovery Manager incompatible with TARGET database: RMAN 8.0.4.0 to 11.1.0.7 required
[code]...
QUestion:
Is posible do this?
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedI installed oracle 11g successfully in my windows7 operating system. After installation it is not allowing me to access C drive. And in the properties of the drive the memory of C drive is shown 0 bytes. And other applications installed in C drive are also not working. Even after uninstalling oracle 11g access to C drive is denied.
View 7 Replies View RelatedI installed oracle 9i from cd's (3 cd pack) all the three cd's installed perfectly but after the installation of these three cd's , a window appears (which is default installation ) in which some below mentioned tools were installed:-
1. Net Configuration Assitant
2. HTTP server etc. when installation of net configuration assistant is going on then a window is popped up saying "jrew.exe stops working" and the process of installation keeps going on and going on..........then when i stopped listener ,then another tool installation starts and after sometime again a window is popped with same message "jrew.exe stops working". means all the 4 tools are not successfully installed ...installing oracle 9i database on windows7.
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedIs it possible to upgrade GI 11.2.0.1 Enterprise Edition version to 11.2.0.3 STANDARD EDITION?
We have 2 Node RAC with 10.2 DB SE. Last time I think by mistake or not knowing the licensing information GI was upgraded to EE 11.2.0.1 by somebody or may be whatever version of GI is used, it has nothing to do with the license?
I have heard that I can upgrade Grid Infrastructure, but to Standard Edition. Does GI also comes with SE and also just want to know that can I perform this upgrade?
2 Node RAC Prod. GI= 11.2..0.1 , DB = 10.2.0.4 SE
I want to upgrade (out of place) Grid Infrastructure to latest version of 11.2.0.3 and then PSU on top of that.
GI HOME and DB HOME are separated. Database I want to upgrade later on, not with this clusterware upgrade. I have download p10404530_112030_Linux-x86-64_3of7.zip from MOS for upgrading GI.
grid@db1p [rec]: /home/grid > crsctl query crs softwareversion
Oracle Clusterware version on node [db1p] is [11.2.0.1.0]
grid@db1p [rec]: /home/grid > crsctl query crs activeversion
Oracle Clusterware active version on the cluster is [11.2.0.1.0]grid@db1px [ec]: /home/grid > sqlplus / as sysasm
[code]....
1) Is this the correct p10404530_112030_Linux-x86-64_3of7.zip to upgrade GI from 11.2.0.1 to 11.2.03?
2) Do I need a COMPLETE DOWNTIME to upgrade GI on 2 node RAC where DB is STANDARD EDITION but Clusterware is 11.2 as you have seen above..
3) Will this ASM version will also be upgraded along with GI upgrade installer or it must be upgrades separately after GI Upgrade?
When I use 'ONSCTL PING' to test the ons status, it says: configure localport and remoteport directives and attempt to start ONS server again.ons is not running.The content of D:app11.2.0gridopmnconfons.config is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The content of D:app11.2.0gridopmnconfons.config.rac2 is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The configuration file is almost the same in rac1.But the output of 'srvctl status nodeapps' is :
ons is enabled
ons is running on node1:rac1
ons is running on node2:rac2
tried to mount a big endian asm disk (AIX for example) on little endian env (linux x86)? I have a disk that KFED is able to read but ASM is unable to mount it due to endianess incompatibility.
from the KFED read: kfbh.endian: 0 ; 0x000: 0x00kfbh.hard: 130 ; 0x001: 0x82kfbh.type: 1 ; 0x002: KFBTYP_DISKHEADkfbh.datfmt: 1 ; 0x003: 0x01kfbh.block.blk: 0 ; 0x004: blk=0kfbh.block.obj: 128 ; 0x008: file=128kfbh.check: 1999209486 ; 0x00c: 0x7729840ekfbh.fcn.base: 0 ; 0x010: 0x00000000kfbh.fcn.wrap: 0 ; 0x014:
[code]...
We try to upgrade the 10g to 11g oracle instance and asm instance.Below steps we r done;
1)First we are install the 11.2.0.3 database and grid infrastructure in separate home.
2)after that i try to upgrade asm instance so i drop old 10g asm localconfig cd $ORACLE10g_HOME./localconfig deletecd $ORACLE11g_HOME./localconfig add but here i can not find localconfig Note:database and grid installed without error....
3)Even we are try dbua but it run 10g dbua we are not able to run dbua for 11g
4)inventory is corrupted how to recreate inventory
5)provide the steps for upgrade 10g asm to 11g asm