I installed oracle 11g successfully in my windows7 operating system. After installation it is not allowing me to access C drive. And in the properties of the drive the memory of C drive is shown 0 bytes. And other applications installed in C drive are also not working. Even after uninstalling oracle 11g access to C drive is denied.
View 7 RepliesHow can i shift my datafiles to other drive like d: , they have become very big. and i also want to take backup on other drive like d: and oracle is installed on c:
View 3 Replies View RelatedWhen I invoke SOAP Web-Service using APEX_WEB_SERVICE.MAKE_REQUEST, then I'm able to get response from web-service. However all German character are replaced by JUNK data. However data is coming fine when I test web-services using SOAP UI.
I tried to invoke web-service using UTL_HTTP. However when I use UTL_HTTP, then I'm getting following error.
ORA-24247: network access denied by access control list
<li> Why German characters are replaced by Junk data while invoking web-service from APEX, while it's working fine from SOAP UI
<li> When I can access web-service successfully using APEX_WEB_SERVICE, then why it's throwing ORA-24247 error when I call using UTL_HTTP?
DB: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
APEX: 4.0.2.00.07
Web-Server: EPG
SELECT * FROM NLS_DATABASE_PARAMETERS;
[code]...
I am having oracle database version 11.2.0.3.0 standard edition, where one of my users requirement is that he wanted to send mails from oracle database but he is getting below error
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at "HF_REPORTING.SEND_MAIL", line 12
ORA-06512: at line 18
is it possible to send mails from oracle database in STANDARD Edition?
While Running the proc,it's raising the below error.
Error report:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYS.UTL_SMTP", line 115
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "LISTER_SHIFT.SOLN_GENERIC_SENDMAIL", line 33
ORA-06512: at line 1
[code]....
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
I installed oracle 9i from cd's (3 cd pack) all the three cd's installed perfectly but after the installation of these three cd's , a window appears (which is default installation ) in which some below mentioned tools were installed:-
1. Net Configuration Assitant
2. HTTP server etc. when installation of net configuration assistant is going on then a window is popped up saying "jrew.exe stops working" and the process of installation keeps going on and going on..........then when i stopped listener ,then another tool installation starts and after sometime again a window is popped with same message "jrew.exe stops working". means all the 4 tools are not successfully installed ...installing oracle 9i database on windows7.
I got an error while trying to install Oracle 9i on a Win XP machine. So, I decided to wipe out Oracle completely and starting again. I deleted all the Oracle entries from the registry and then tried deleting the folder. But while doing that, I am getting the following error - "Cannot delete oci:Access denied"
The disk is neither write-protected nor is the oci.dll file in use.
I am installing RAC on my Laptop using VM ware workstation . I have created two linux machines on VM ware with 1 gb merory on each machine . I installed 10.2.0.1 clusterware successfully but when i am installing 10.2.0.1 database binaries my machine reboot every time .
View 3 Replies View Relatedhow to format a drive using oracle forms 10g and shutting down the remote pc and a personal pc using oracle forms 10g. i am using windows XP2 as os.
View 2 Replies View Relatedi installed Oracle 11.2.0 64bit & Oracle SQL developer 2.1.1.64 on Windows-7 64bit
i try to connect to database like this:
username: scott
password: tiger
role : sysdba
hostname: localhost
port : 1521
sid : ORCL
and i got this error: `ora-01017 invalid username/password; logon denied`
I have stored test.sql in shared mapped drive and i don't have previlege to rename but i can read-write access at folder level.
How do i run the below sql script?
@\ind-aaa est est.sql
Here \ind-aaa is the mapped drive name.
I am getting error that \ind not found.
how to load the pdf data from c drive to the oracle tables to their respective columns in forms 6i.
View 4 Replies View RelatedI installed and configures APEX in standalone mode about 2 weeks ago and played with it for short time. Now after 2 weeks I came back to start where I left off but APex_admin page would not come up.
I did following tasks as were found on Installed Apex on Oracle 11g. But cannot access admin screen
SQL> SELECT STATUS FROM DBA_REGISTRY
2 WHERE COMP_ID = 'APEX';
STATUS
-----------
VALID
SQL> conn sys as sysdba
Enter password:
[code]...
warning me that XDB requires username password to be sent through insecure manner (Basic authetication without a secure connection
I am creating a cross platform database application using Mono. It uses oracle database as back end. I used ODBC drive to connecting database. I can connect to database using this following connection string in my windows machine
Driver={Oracle in OraDb11g_home1};Server=localhost;Uid=system;Pwd=manager
For Linux I uses Linux Oracle OS for Database server. I installed oracle client in my fedora OS. and cofigure the client using net cofiguration assistant tool with oracle client. client connection working OK. Then I try to connect with my mono application using the following connection string
Driver={Oracle ODBD Drive};Server=orcl;Uid=system;Pwd=manager
but the above connection string not worked.I am using Oracle 11g version. Do I need to install any other ODBC driver to access oracle database
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedBut i do a lot of work-arounds to make sure the installation does not make corrupt my OracleAgent,OracleService and OracleDataGatherer. If i just let the installation do its thing i have problems with my libraries, and can't start anything.
The errors are : Procedure entry point 'BlaBla' could not be located in the Dynamic Link library 'AnyName'.
I notice that i have 2 versions of the libraries in OracleHomeBIN (one version 8, one version 11). The programs that start the OracleAgent,Service and DataGatherer call the old libraries but expect to find values that can be found only in new libraries.
While installing oracle 9i on windows XP. Oracle database configuration agent fails.
And it throws following error message.
java.lang.NoClassDefFoundError: oracle/sysman/emSDK/common/nls/MessageBundle
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.loadAllInitParams(Compiled Code)
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.initialize(InitParamAttributes.java:313)
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.<init>(InitParamAttributes.java:255)
[code]........
I have tried to install oracle 10g on my Windows XP. But during the installation I have got these errors:
"Enterprise manager configuration failed due to the following error. Error instanting EM configuration files. Refer to the log file U:\...\orcl6\emConfig.log for more details"
"VTA-1000 : The browser could not be launched with the file or
URL :%EM_UPLOAD_PORT%/em"
here is the error faced when installing oracle 11gR2,
ERROR:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/.colorls9rT/OraInstall2013-09-12_03-59-57PM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
[code]...
I am trying to install Oracle 10g Developer suite on windows 7 but the system gives the following error. (file attached). I have successfully installed Oracle 10g Database.
View 6 Replies View RelatedI already have 9i installed at my desktop.I tried to install oracle 10g version 1. But it got struck with "oracle database configurations assistant" on configuration assistants window.Then I did the below.
1) I clicked stop, but still didn't get stop.
2) And also the window didn't enable the 'Retro' button
When i try to install Oracle forms ver.11g(newest version), after several seconds I have this error: "INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install." I have already installed Weblogic 12c (also newest version) - it works fine, but how can I upgrade it to 10.3.5.0 ?? (I really have to ? It won't work with Weblogic 12c?)
I installed oracle database 10g on my laptop, it installed successfully. I see sql plus in my program, how will i get login details for my database?
View 6 Replies View RelatedI already succeded to setyup Oracle 10 G on my machine , when trying to connect by system/system it does not connect.The listener is OK and instance ok.
View 10 Replies View Relatedtips to install the ORACLE 10g,developer 2000 in Windows 7 64 bit.
View 3 Replies View RelatedDatabase: 12cR1, 12.0.1.0, x64System: Oracle Linux 6.4, x64
I installed a simple starter database during the installation of Oracle Database 12cR1 with the PDBORCL option selected (default) and would like to install the Oracle Example data, such as users HR schema, etc.
according to URL....IDENTIFIED BY hr *ERROR at line 1:ORA-65096: invalid common user or role name
Perhaps the scripts were not designed for container and plug-able databases. I did the following:
alter pluggable database pdborcl open;alter session set container=PDBORCL;@?/demo/schema/human_resources/hr_main.sqlUser altered. Grant succeeded.Grant succeeded.Connected.GRANT execute ON sys.dbms_stats TO hr
*ERROR at line 1:ORA-01917: user or role 'HR' does not exist
I could probably create a normal database, but I wonder if there is any other option without having to modify the setup scripts.
When i trying to install oracle Forms on Windows XP i am getting following error message . When i click on Setup , Dos windows Opens with following error message .
Starting Oracle Universal Installer. Checking installer requirements.
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before continuing with the installation, at which time they will be rechecked.
Continue? (y/n) [n]
My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.