Windows / .NET :: Oracle ODBC Drive In Linux Client To Connect With Mono Application
Aug 6, 2012
I am creating a cross platform database application using Mono. It uses oracle database as back end. I used ODBC drive to connecting database. I can connect to database using this following connection string in my windows machine
Driver={Oracle in OraDb11g_home1};Server=localhost;Uid=system;Pwd=manager
For Linux I uses Linux Oracle OS for Database server. I installed oracle client in my fedora OS. and cofigure the client using net cofiguration assistant tool with oracle client. client connection working OK. Then I try to connect with my mono application using the following connection string
Driver={Oracle ODBD Drive};Server=orcl;Uid=system;Pwd=manager
but the above connection string not worked.I am using Oracle 11g version. Do I need to install any other ODBC driver to access oracle database
View 1 Replies
ADVERTISEMENT
Sep 17, 2002
I am attempting to connect to an Oracle 8i database via the Oracle 9.02 ODBC driver and I am receiving the following error message upon testing the connection in WinXp's ODBC Data Source Administrator dialog box: "Unable to connect SQLState=IM004 [[Microsoft]][[ODBC Driver Manager]] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed" .
I am running Oracle Client 9.2 on a P4 machine running winXP.
View 28 Replies
View Related
Dec 20, 2012
Database: oracle 9i sitting on a 32 bit machine.
Client: windows7 64 bit computer
installed oracle 11gr2 client
Is there a way to connect to oracle 9i database from C:WindowsSysWow64odbcad32.exe on windows 7 machine? or what is the possible way to connect to Oracle 9i database?What we need is to run crystal reports from windows 7.
View 4 Replies
View Related
Sep 5, 2012
I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
1. Downloaded the Oracle Client from the link [URL] . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:Oracleinstantclient_11_2.
2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:Oracleinstantclient_11_2, ran odbc_install.
3.Created the Environment variables as
i) *TNS_ADMIN - C:Oracleinstantclient_11_2*
ii) *Oracle_Home - C:Oracleinstantclient_11_2*
iii) *Edited the PATH variable with ;C:Oracleinstantclient_11_2*
4. Created the tnsnames.ora file in C:Oracleinstantclient_11_2. Its content are as follows.
clarity_dev =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521))
)
(CONNECT_DATA =
(SID = clarity)
)
)
5. From the folder %windir%sysWOW64odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
Data Source Name : claritydev.vip.its.com
TNS Service Name : clarity_dev
User Id: clarity1
When I test connect it, I get error *ORA-12154:*
* TNS:could not resolve the connect identifier specified*
I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
View 3 Replies
View Related
Aug 18, 2012
I have Oracle 9i DB in windows 2003 server, I want to access this DB from Linux desktop. Is there any 'client software' is available to connect Or procedure to connect the DB.
View 0 Replies
View Related
Sep 25, 2013
I am developing an 64bit And-In software. My OS is windows7 64bit Ultimate. Developer tool is Microsoft Visual Studio 2010 Ultimate 64bit any-CUP.Server is SUN server and Oracle database 10.2.0.5 64bit enterprise edition.I have installed instantclient-odbc-win64-10.2.0.5 on my computer.I am able to connect through the command line sqlplus user/pass@server.In date source(c:windowssystem32odbcad32.exe), ODBC Driver connection successful.But in VS2010 C#, use Tools -> Connect Database,I get an error 193 (Oracle in instantclient10_2,c:ora10_64SQORA32.dll) cann't be loaded.SQORA32.dll is 32bit ODBC Driver or 64bit ODBC Driver?How can I connect database with vs2010 64bit?
View 2 Replies
View Related
Dec 10, 2012
Env destination-linux:2.6.18-308.13.1.el5,oracle:10.2.0.1 ,source:windows.mssql v:8.00760
I was try migrate one sample database from mssql "Pubs" using Oracle SQL Developer Tool.
After migraton i've got prefixes in tables like MD_<table_name> but i can not see tables from Pubs only a lot of tables like :
MD_COLUMNS
MD_GROUPS
etc...
View 10 Replies
View Related
Jun 28, 2010
The version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi. for Unix AIX 5
I install the ODBC Driver Manager, Basic Instant Client, ODBC Instant Client packages (libsqora.so, odbc_update_ini.sh).
The error:
[oracle@d4 oracle] $ isql OracleODBC-10g user passtemp -v
[01000][unixODBC][Driver Manager]Can't open lib '/home/oracle/instantclient_10_2/libsqora.so' : file not found
[ISQL]ERROR: Could not SQLConnect
Configuration
odbcinst.ini
[Oracle10gODBCdriver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /u01/app/oracle/product/10.2.0/db_1/lib/libsqora.so
Setup =
FileUsage =
CPTimeout =
CPReuse =
The documentation explic with exists the file libsqora.so.10.1 but not exists in the ODBC Instant Client packages.
I applied ln -s libsqora.so.10.1 libsqora.so but the connection not function
odbc.ini
[oradns]
Application Attributes=T
Attributes=W
BatchAutocommitMode=IfAllSuccessful
CloseCursor=T
[code].......
View 1 Replies
View Related
Jul 16, 2013
Can application connect with windows authentication to oracle 11.2.0.3 database? if so then how can i set it up!
View 3 Replies
View Related
Jan 4, 2013
i want to use Oracle database client 10g ODBC driver but i don't have it.
I want the driver for setup.
View 0 Replies
View Related
Nov 17, 2010
I have recently installed the latest Oracle 32bit client 10.2.0.3.0 on a Windows 2008 server. Installation was successful and I was able to create the required service names and test them to the Oracle database server. Now when I try to create an ODBC connection with Oracle in OraClient10g_home1, I get the following error: SQORAS32
An unsupported operation was attempted
If I install Oracle client 10.2.0.1.0, I don't get this error. It happens with the latest client. Is there any was to solve this error?
View 3 Replies
View Related
Jul 17, 2010
I have stored test.sql in shared mapped drive and i don't have previlege to rename but i can read-write access at folder level.
How do i run the below sql script?
@\ind-aaa est est.sql
Here \ind-aaa is the mapped drive name.
I am getting error that \ind not found.
View 2 Replies
View Related
Jul 16, 2012
I'm using following connection string: +connectionString="Driver={Oracle ODBC Driver};Server=someDb;Uid=useruidr;Pwd=password"+
when I call method "Open" on "OdbConnection" I get following exception: +ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified+
"someDb" is specified correctly in tsnames.ora,
"...client" and "...clientin" are added to PATH environmental variable
ORACLE_HOME is set to "...client"
I have Oracle Client 11.2.0.3.0 installed
Operating system is Windows 7 32 bit
When I change Driver to "Microsoft ODBC for Oracle" it works fine. However I want to use Oracle ODBC Driver.
View 2 Replies
View Related
Feb 1, 2013
Windows 7
Oracle XE 11gR2
From Windows, I can successfully create and connect with a system data source using an user Oracle account.But when doing then same configuration process I can not create or connect using the 'SYS' account.
i get the error 'ORA-2009: connection as SYS should be as SYSDBA or SYSOPER'.
What is the solution to creating an ODBC DSN for the user 'SYS'?
View 6 Replies
View Related
Jun 13, 2013
the database (11gR2) is located on Linux server. A business application is installed on a Windows server with an Oracle client 11g.The application is able to start a datapump export, but as matter of fact the dumpfiles are always written to the Linux-server. The directoryobject is defined as DATA_PUMP_DIR (which is the default directory).
Now we are supposed to change the datapump export in a matterthat the dumpfiles get written to the Windows server. Creating a new directory (e.g. c:datapump) and starting than the datapump from theclient always raises the errors
ORA-39002: ...ORA-39070: ...ORA-29283: ...ORA-06512: in "SYS.UTL_FILE", Zeile 536ORA-29283: ...
Is it possible at all to start a datapump export from a Windows client and writing the dumpfiles to the Windows server itself? Or do the dumpfiles always written to the database-server?
View 9 Replies
View Related
Jan 9, 2013
I work in a large bank in a department that produces reports for different areas of the bank. By and large, we use Microsoft Office products to interface with our Oracle databases.Recently, we had two new databases come online that use Oracle 11g - we were not using any 11g databases before this point. We have two other databases that we use that run on Oracle 10g.
Up until the two new databases were brought in, our reporting was done from systems that used 10g and 9I. We all ran the Oracle 9I driver to connect to them, and it worked very well without issue. With the addition of the 11g databases to our reporting pool, we have been forced to upgrade our ODBC connections to the 11g driver, and it has not gone well at all. I had one query that typically ran in 30 minutes take +13 hours+ to run yesterday. Speed is not the only issue, either; we have sporadic ODBC call fails, crashes, and other general failures to deal with.
Our Oracle DBAs have been trying to solve the issue, but have not yet found a solution, and each day that this goes on we fall further and further behind, as I have daily time-sensitive reports to send out that depend on this data.
One of our DBAs said she read somewhere that Oracle had not included MS Access support in the 11g driver, and that the errors were due to the imperfect connection that the driver created. I don't know of there's any truth to that, but it would provide an explanation for our troubles. We have to use Access for our reporting, as over 90% of our existing reports and processes use Access, and having to change over everything at once is just not feasible.
Is there any way to force the 9I and 11g ODBC connections to coexist, so that we don't have to use the 11g driver for our 10g databases? Or is there a better 11g driver available?
View 2 Replies
View Related
Apr 15, 2011
The following error message occured when i connected from a client 11.2.0 (64 bits) to a database installing with a 10g 64 bits.
"Test connection failed because of an error in initializing provider.Oracle client and networking components were not found.These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. "
Is there any requirement like the client has to be installed with a 32 bits version of oracle because Windows restrictions?
The current config:
The server: Windows 2008 (64 bits) with Oracle 10g (64 bits).
The client: Windiws 2003 (64 bits) with Oracle 11.2.0 (64 bits).
View 3 Replies
View Related
Oct 8, 2011
I want to configure rman backup for oracle 9i database on hp tape drive. Db is running in RHEL.
View 6 Replies
View Related
Dec 6, 2010
I want to update the ODBC drivers in ORACLE 8i version. it's possible or not.
View 2 Replies
View Related
Oct 17, 2010
I'm trying to migrate our forms application from a Linux platform to Windows 7. We have a common pll which is attached to all forms and unfortunately relies heavily on globals.
Attempting to run the application with the standard library attached to the login form has the effect that the globals are lost between the login form and subsequent forms. If I incorporate the library code directly into the login form, it functions correctly. If I use the debugger to track where the clearing occurs, it functions correctly.
View 2 Replies
View Related
Jun 24, 2013
How I can connect database on unix OS and windows what is the deference.
View 7 Replies
View Related
Aug 17, 2010
I have installed oracle developer 6i. in sqlplus i want to put my username and password but nothing in the connect string field.
View 1 Replies
View Related
Feb 21, 2013
The problem is that this connection errors when I try to connect using my SQuirreL client. My developers want to connecting using the SID or the SERVICE_NAME and by using the "New Method" syntax, not the "Old Method" syntax. According to the documentation the "New Method" syntax works with the SERVICE_NAME or the SID. The "Old Method" only works with the SID.
# Host name is vmwwin7634.na.SAS.com
# SID is sting2
# SERVICE_NAME is sting2.na.sas.com
PROBLEM using SID errors ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2
THIS WORKS using SERVICE_NAME ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com
I am using SQuirreL Client version 3.4.0
# Here is the tnsnames.ora entry on the server.
STING2 =
(DESCRIPTION =
[code]...
# In this documentation it says, "On new syntax SERVICE may be a oracle service name or a SID."You can find this on the orafax wiki under JDBC#Thin_driver.
# I was able to connect with the "old method" using the SID only, SERVICE_NAME errors jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2.na.sas.com
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2 (this works)
# "New Method"
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com (this works)
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2 (this errors)
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
View 10 Replies
View Related
Nov 18, 2012
share with me a linnk of oracle 11g client on RHEL 5 32 bit due to i search in oracle web site and found only 64 bit URL.....share with me a link of installation guide of this client?
View 4 Replies
View Related
Dec 11, 2012
I have new virtual UNIX machine and I installed oracle client on /usr/lib/oracle. Also I have a oracle database and I am able to connect to this database from my desktop sql developer.
So now I am trying to connect from new UNIX machine. Where I created tnsnames.ora file under /usr/lib/oracle/network/admin and before connecting did export the following
export TNS_ADMIN=/usr/lib/oracle/network/admin
export ORACLE_HOME=/usr/lib/oracle/
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$HOME/bin:/sbin:$ORACLE_HOME/bin
export ORACLE_SID=VFIODSD1
when I try
# sqlplus
username :xxxxxxx
password : xxxxxxx
ORA-12545: Connect failed because target host or object does not exist. Not sure what I missed here. using same tns file I am able to connect from sql developer on windows.
View 1 Replies
View Related
Feb 10, 2010
We are planning to migrate the forms application from windows to linux.
View 1 Replies
View Related
Jun 22, 2012
Question: to migrate from oracle 10gR2 in Windows to oracle 11gR2 in Linux . Steps are:
1. need to expdp all schemas/users from oracle 10gR2 in Windows,
2. then impdp each schema/user into oracle 10gR2 in Linux first,
3. then upgrade the oracle 10gR2 in Linux to oracle 11gR2 in Linux ?
4. Do I need to pre-create all the same tablespaces first in oracle 10gR2 in Linux ?
Is it correct ? or I can migrate straight all schemas/users from oracle 10gR2 in Windows to oracle 11gR2 in Linux using impdp ?
View 5 Replies
View Related
Nov 12, 2012
We have a scenario where Oracle Database R1 is installed on Windows System and the Client is present on Linux. Both the system is on same network. We can access Windows -2-Windows using TNS entry.
I am unable to connect to this scenario where Database is on Windows and Client is on Linux.
View 8 Replies
View Related
Oct 25, 2013
Migration of oracle forms 10g 32 bit windows platform to 11g 64bit Linux platform . I have about 500 fmb on my 10g environment which are currently working fine but when i go to compile it on 11g an error file is generated. All my path is set in proper manner .
I have a object library which has multiple tabs and every tab has its own object. While compiling, the forms are not inheriting the object values only few values from the object are considered.
View 5 Replies
View Related
Jul 16, 2008
We have a .NET application on windows server 2008 32bit using the stored procedures on an Oracle 10g environment. We are trying to deploy the .NET application onto a 64bit x86 Windows server 2008.
We face an error trying to install the x64 version of the Oracle 10g client on windows 2008. The error we get is Problem signature:
Problem Event Name: APPCRASH
Application Name: javaw.exe
Is the x64 version of the Oracle 10g client certified for Windows 2008? Has anyone successfully installed the 64bit version of the oracle client on win2008?
We have a workaround in place with 32 bit version of the client running with the 32 bit version of the .NET application on x64 win2008. However to maximize the infrastructure we need to use the 64 bit version or we would have to turn to MSSQL Server .
View 4 Replies
View Related
