Oracle Client 10.2.0.3.0 With ODBC?
Nov 17, 2010
I have recently installed the latest Oracle 32bit client 10.2.0.3.0 on a Windows 2008 server. Installation was successful and I was able to create the required service names and test them to the Oracle database server. Now when I try to create an ODBC connection with Oracle in OraClient10g_home1, I get the following error: SQORAS32
An unsupported operation was attempted
If I install Oracle client 10.2.0.1.0, I don't get this error. It happens with the latest client. Is there any was to solve this error?
View 3 Replies
ADVERTISEMENT
Jun 28, 2010
The version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi. for Unix AIX 5
I install the ODBC Driver Manager, Basic Instant Client, ODBC Instant Client packages (libsqora.so, odbc_update_ini.sh).
The error:
[oracle@d4 oracle] $ isql OracleODBC-10g user passtemp -v
[01000][unixODBC][Driver Manager]Can't open lib '/home/oracle/instantclient_10_2/libsqora.so' : file not found
[ISQL]ERROR: Could not SQLConnect
Configuration
odbcinst.ini
[Oracle10gODBCdriver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /u01/app/oracle/product/10.2.0/db_1/lib/libsqora.so
Setup =
FileUsage =
CPTimeout =
CPReuse =
The documentation explic with exists the file libsqora.so.10.1 but not exists in the ODBC Instant Client packages.
I applied ln -s libsqora.so.10.1 libsqora.so but the connection not function
odbc.ini
[oradns]
Application Attributes=T
Attributes=W
BatchAutocommitMode=IfAllSuccessful
CloseCursor=T
[code].......
View 1 Replies
View Related
Sep 5, 2012
I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
1. Downloaded the Oracle Client from the link [URL] . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:Oracleinstantclient_11_2.
2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:Oracleinstantclient_11_2, ran odbc_install.
3.Created the Environment variables as
i) *TNS_ADMIN - C:Oracleinstantclient_11_2*
ii) *Oracle_Home - C:Oracleinstantclient_11_2*
iii) *Edited the PATH variable with ;C:Oracleinstantclient_11_2*
4. Created the tnsnames.ora file in C:Oracleinstantclient_11_2. Its content are as follows.
clarity_dev =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521))
)
(CONNECT_DATA =
(SID = clarity)
)
)
5. From the folder %windir%sysWOW64odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
Data Source Name : claritydev.vip.its.com
TNS Service Name : clarity_dev
User Id: clarity1
When I test connect it, I get error *ORA-12154:*
* TNS:could not resolve the connect identifier specified*
I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
View 3 Replies
View Related
Dec 6, 2010
I want to update the ODBC drivers in ORACLE 8i version. it's possible or not.
View 2 Replies
View Related
Aug 6, 2012
I am creating a cross platform database application using Mono. It uses oracle database as back end. I used ODBC drive to connecting database. I can connect to database using this following connection string in my windows machine
Driver={Oracle in OraDb11g_home1};Server=localhost;Uid=system;Pwd=manager
For Linux I uses Linux Oracle OS for Database server. I installed oracle client in my fedora OS. and cofigure the client using net cofiguration assistant tool with oracle client. client connection working OK. Then I try to connect with my mono application using the following connection string
Driver={Oracle ODBD Drive};Server=orcl;Uid=system;Pwd=manager
but the above connection string not worked.I am using Oracle 11g version. Do I need to install any other ODBC driver to access oracle database
View 1 Replies
View Related
Dec 17, 2012
I've to install ODBC drivers required by a Windows application ( Windesign ).I've downloaded on Oracle website :
- instantclient-basic-windows.x64-11.2.0.3.0.zip
- instantclient-odbc-windows.x64-11.2.0.3.0.zip
- ODBC driver - Oracle 10.1.exe
- ODBC driver - Oracle 10.2.exe
- ODBC driver - Oracle 9.01.exe
- ODBC driver - Oracle 9.02.exe
But any of them contains install.exe or something like that...So I don't understand how to install instant client...I've found a doc on the web : " ... copy unzipped files into a folder ( ex.: C:OracleInstantClient ) and add Environment Variables TNS_ADMIN and PATH ) ... "I did it. But while adding ODBC driver with Windows admin tools , only SQL Server is available !!!.
View 2 Replies
View Related
Aug 29, 2012
Is it possible to have a VB.NET aplication using Oracle ODBC driver without running/installing odbc_install.exe?
I want to deploy my application without having to run anything on the client so I guessed that instant client would work but I can't make it work.
View 0 Replies
View Related
Feb 10, 2011
I am using an Microsoft Access application which accessing an Oracle Database with ODBC.
each time i change data in the ACCESS forms, the change is committed in the database. I would like to know how to set the AUTOCOMMIT off.
View -1 Replies
View Related
Jan 4, 2013
i want to use Oracle database client 10g ODBC driver but i don't have it.
I want the driver for setup.
View 0 Replies
View Related
Sep 17, 2002
I am attempting to connect to an Oracle 8i database via the Oracle 9.02 ODBC driver and I am receiving the following error message upon testing the connection in WinXp's ODBC Data Source Administrator dialog box: "Unable to connect SQLState=IM004 [[Microsoft]][[ODBC Driver Manager]] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed" .
I am running Oracle Client 9.2 on a P4 machine running winXP.
View 28 Replies
View Related
Sep 15, 2012
I am getting Oracle odbc ora-28000 account locked error
View 1 Replies
View Related
Jul 16, 2012
I'm using following connection string: +connectionString="Driver={Oracle ODBC Driver};Server=someDb;Uid=useruidr;Pwd=password"+
when I call method "Open" on "OdbConnection" I get following exception: +ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified+
"someDb" is specified correctly in tsnames.ora,
"...client" and "...clientin" are added to PATH environmental variable
ORACLE_HOME is set to "...client"
I have Oracle Client 11.2.0.3.0 installed
Operating system is Windows 7 32 bit
When I change Driver to "Microsoft ODBC for Oracle" it works fine. However I want to use Oracle ODBC Driver.
View 2 Replies
View Related
Feb 1, 2013
Windows 7
Oracle XE 11gR2
From Windows, I can successfully create and connect with a system data source using an user Oracle account.But when doing then same configuration process I can not create or connect using the 'SYS' account.
i get the error 'ORA-2009: connection as SYS should be as SYSDBA or SYSOPER'.
What is the solution to creating an ODBC DSN for the user 'SYS'?
View 6 Replies
View Related
Aug 25, 2010
ODBC--call failed.TNS:listener was not given the SID in CONNECT_DATA (#12504)
TNSname sets the SID. SQL*Plus is able to connect from the client Windows XP Proff using the same name. Access, on the same client, uses the same Oracle driver to connect successfully to other Oracle databases. These other databases show equal tnsname (different name and SID...)
ODBC Data Source Administrator configures the database and the test connection is successful.
Cannot set up a link from Access to the Oracle database. At some point, I have created a new Access database and it did let me connect, view the list of tables, and set up links to several tables, but the next day I could not open any of the tables and the complain was: ODBC--connection to 'MYDB' failed.
It seems that SQL*Plus passes correctly the SID from the TNSname but ODBC, when invoked from Access, does not. Yet, ODBC does it right for other databases.
View 12 Replies
View Related
Jan 9, 2013
I work in a large bank in a department that produces reports for different areas of the bank. By and large, we use Microsoft Office products to interface with our Oracle databases.Recently, we had two new databases come online that use Oracle 11g - we were not using any 11g databases before this point. We have two other databases that we use that run on Oracle 10g.
Up until the two new databases were brought in, our reporting was done from systems that used 10g and 9I. We all ran the Oracle 9I driver to connect to them, and it worked very well without issue. With the addition of the 11g databases to our reporting pool, we have been forced to upgrade our ODBC connections to the 11g driver, and it has not gone well at all. I had one query that typically ran in 30 minutes take +13 hours+ to run yesterday. Speed is not the only issue, either; we have sporadic ODBC call fails, crashes, and other general failures to deal with.
Our Oracle DBAs have been trying to solve the issue, but have not yet found a solution, and each day that this goes on we fall further and further behind, as I have daily time-sensitive reports to send out that depend on this data.
One of our DBAs said she read somewhere that Oracle had not included MS Access support in the 11g driver, and that the errors were due to the imperfect connection that the driver created. I don't know of there's any truth to that, but it would provide an explanation for our troubles. We have to use Access for our reporting, as over 90% of our existing reports and processes use Access, and having to change over everything at once is just not feasible.
Is there any way to force the 9I and 11g ODBC connections to coexist, so that we don't have to use the 11g driver for our 10g databases? Or is there a better 11g driver available?
View 2 Replies
View Related
Sep 25, 2013
I am developing an 64bit And-In software. My OS is windows7 64bit Ultimate. Developer tool is Microsoft Visual Studio 2010 Ultimate 64bit any-CUP.Server is SUN server and Oracle database 10.2.0.5 64bit enterprise edition.I have installed instantclient-odbc-win64-10.2.0.5 on my computer.I am able to connect through the command line sqlplus user/pass@server.In date source(c:windowssystem32odbcad32.exe), ODBC Driver connection successful.But in VS2010 C#, use Tools -> Connect Database,I get an error 193 (Oracle in instantclient10_2,c:ora10_64SQORA32.dll) cann't be loaded.SQORA32.dll is 32bit ODBC Driver or 64bit ODBC Driver?How can I connect database with vs2010 64bit?
View 2 Replies
View Related
Dec 20, 2012
Database: oracle 9i sitting on a 32 bit machine.
Client: windows7 64 bit computer
installed oracle 11gr2 client
Is there a way to connect to oracle 9i database from C:WindowsSysWow64odbcad32.exe on windows 7 machine? or what is the possible way to connect to Oracle 9i database?What we need is to run crystal reports from windows 7.
View 4 Replies
View Related
Feb 21, 2013
The problem is that this connection errors when I try to connect using my SQuirreL client. My developers want to connecting using the SID or the SERVICE_NAME and by using the "New Method" syntax, not the "Old Method" syntax. According to the documentation the "New Method" syntax works with the SERVICE_NAME or the SID. The "Old Method" only works with the SID.
# Host name is vmwwin7634.na.SAS.com
# SID is sting2
# SERVICE_NAME is sting2.na.sas.com
PROBLEM using SID errors ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2
THIS WORKS using SERVICE_NAME ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com
I am using SQuirreL Client version 3.4.0
# Here is the tnsnames.ora entry on the server.
STING2 =
(DESCRIPTION =
[code]...
# In this documentation it says, "On new syntax SERVICE may be a oracle service name or a SID."You can find this on the orafax wiki under JDBC#Thin_driver.
# I was able to connect with the "old method" using the SID only, SERVICE_NAME errors jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2.na.sas.com
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2 (this works)
# "New Method"
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com (this works)
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2 (this errors)
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
View 10 Replies
View Related
Jan 13, 2011
can we use oracle client version to create a database in that server.
View 3 Replies
View Related
Dec 11, 2012
I have new virtual UNIX machine and I installed oracle client on /usr/lib/oracle. Also I have a oracle database and I am able to connect to this database from my desktop sql developer.
So now I am trying to connect from new UNIX machine. Where I created tnsnames.ora file under /usr/lib/oracle/network/admin and before connecting did export the following
export TNS_ADMIN=/usr/lib/oracle/network/admin
export ORACLE_HOME=/usr/lib/oracle/
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$HOME/bin:/sbin:$ORACLE_HOME/bin
export ORACLE_SID=VFIODSD1
when I try
# sqlplus
username :xxxxxxx
password : xxxxxxx
ORA-12545: Connect failed because target host or object does not exist. Not sure what I missed here. using same tns file I am able to connect from sql developer on windows.
View 1 Replies
View Related
Jul 20, 2012
Can i install Oracle 10g Client 32 bit on our Windows Server 2008 R2 64 bit?
View 1 Replies
View Related
Jul 11, 2012
I need to install Oracle client to get latest sql plus working on client pc as the problem is, i am not able to find out where i can download this , i just need the sql plus as i am not able use many commands because when i installed oracle forms 6i client tool , sql plus 8.0 got installed.
View 4 Replies
View Related
Dec 15, 2011
I have Oracle 7 database on Server1. I need to connect this using Oracle client from windows XP.
I have downloaded Oracle client 3.0 and when I am trying to connect it saying "Unable to connect: Unsupported Oracle version".
View 8 Replies
View Related
Oct 3, 2011
I would like to know if there is some specific file who identifies the installation of Oracle Client in some machine.
View 4 Replies
View Related
Feb 1, 2013
What are the steps required to change an ORACLE stored procedure (on a AIX/UNIX machine) using OTG to connect to a DB2 database, to an ORACLE stored procedure that uses ODBC or JDBC connectivity?
All I need to do in the stored procedure is a simple insert statement into a DB2 table.
What kind of ODBC/JDBC driver do I need on the UNIX machine? unixODBC?
What would be different in the ORACLE stored procedure for it to use ODBC connectivity rather than OTG.
View 1 Replies
View Related
Jan 14, 2012
I am using DataBase Express 11g as a development site.I have developed a Delphi GUI to run with it. (32bit). All runs as expected!My associate has a Windows 7 (64bit) machine. Express installation does not supply an ODBC driver. DataBase Express installs without problem, but it is the connectivity that is the problem
I understand that 11g(full) supplies both 32 & 64 OBDC drivers.I do not want to install the full 11g database if it can be avoided.
This is going to be more of a problem the more 64bit machines get into the workplace.Is there an alternative connection method available?
View 1 Replies
View Related
Nov 12, 2012
Using Server 2008 Standard Edition 64 bit. We have been running full client (admin) version 10.2.0 and just installed full client (admin) 11.2.0. Both homes are in my path variable with 11.2 first.
From ODBC Administrator, I can can create new system data sources using the 11.2 client driver and the testing widget built into the data source creator says my connection is good to both 10.2 dbs and 11.2 dbs. So the 11.2 odbc driver would seem to be working.
However, from MS Access, I can only see 10.2 drivers and 10.2 data sources, which fail unless I put the 10.2 home in first place in my path.
I cannot find a way to "access" the 11.2 drivers from MS Access. If I try to create a new data source from inside MS Access, I only see the old 10.2 driver.
View 3 Replies
View Related
Sep 13, 2012
the need to use 9i Oracle ODBC drivers with 11g? What issues might be raised with this? Our application is using a very old technology and has issues, in certain functional areas, with 11g ODBC, and we found by reverting the driver to 9.0.0.2 it works.
View 6 Replies
View Related
Dec 8, 2012
I installed the Oracle instant client version 10.2.0.3 and the corresponding ODBC driver. When I try to add a DSN in ODBC Manager using the Oracle driver, it crashes and I get this message:
"ODBC Administrator has stopped working"
"Windows is checking for a solution to the problem..."
Trying to isolate this problem, I ran odbcad32.exe under DependencyWalker and it worked correctly without crashing. According to the Dependency Walker FAQ, this can be due to a "buffer overrun, stray/bad/freed pointer, etc.". They have a switch to set SET NODEBUG_HEAP=1 to check for this. When I did this, it crashes insider DependencyWalker also.
View 0 Replies
View Related
Jun 19, 2013
When a database is configured to use AL16UTF16 what character set is sent from DG4ODBC to an ODBC driver when passing in Arabic characters ?
i am using easy soft odbc driver for transfering data from oracle to MS SQL server. English text is going fine, but when i am trying to transfer some arabic text, it is getting corrupted.
View 2 Replies
View Related
