Database: oracle 9i sitting on a 32 bit machine.
Client: windows7 64 bit computer
installed oracle 11gr2 client
Is there a way to connect to oracle 9i database from C:WindowsSysWow64odbcad32.exe on windows 7 machine? or what is the possible way to connect to Oracle 9i database?What we need is to run crystal reports from windows 7.
I am attempting to connect to an Oracle 8i database via the Oracle 9.02 ODBC driver and I am receiving the following error message upon testing the connection in WinXp's ODBC Data Source Administrator dialog box: "Unable to connect SQLState=IM004 [[Microsoft]][[ODBC Driver Manager]] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed" .
I am running Oracle Client 9.2 on a P4 machine running winXP.
I am creating a cross platform database application using Mono. It uses oracle database as back end. I used ODBC drive to connecting database. I can connect to database using this following connection string in my windows machine
Driver={Oracle in OraDb11g_home1};Server=localhost;Uid=system;Pwd=manager
For Linux I uses Linux Oracle OS for Database server. I installed oracle client in my fedora OS. and cofigure the client using net cofiguration assistant tool with oracle client. client connection working OK. Then I try to connect with my mono application using the following connection string
Driver={Oracle ODBD Drive};Server=orcl;Uid=system;Pwd=manager
but the above connection string not worked.I am using Oracle 11g version. Do I need to install any other ODBC driver to access oracle database
I am developing an 64bit And-In software. My OS is windows7 64bit Ultimate. Developer tool is Microsoft Visual Studio 2010 Ultimate 64bit any-CUP.Server is SUN server and Oracle database 10.2.0.5 64bit enterprise edition.I have installed instantclient-odbc-win64-10.2.0.5 on my computer.I am able to connect through the command line sqlplus user/pass@server.In date source(c:windowssystem32odbcad32.exe), ODBC Driver connection successful.But in VS2010 C#, use Tools -> Connect Database,I get an error 193 (Oracle in instantclient10_2,c:ora10_64SQORA32.dll) cann't be loaded.SQORA32.dll is 32bit ODBC Driver or 64bit ODBC Driver?How can I connect database with vs2010 64bit?
View 2 Replies View Relatedi want to use Oracle database client 10g ODBC driver but i don't have it.
I want the driver for setup.
I'm using following connection string: +connectionString="Driver={Oracle ODBC Driver};Server=someDb;Uid=useruidr;Pwd=password"+
when I call method "Open" on "OdbConnection" I get following exception: +ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified+
"someDb" is specified correctly in tsnames.ora,
"...client" and "...clientin" are added to PATH environmental variable
ORACLE_HOME is set to "...client"
I have Oracle Client 11.2.0.3.0 installed
Operating system is Windows 7 32 bit
When I change Driver to "Microsoft ODBC for Oracle" it works fine. However I want to use Oracle ODBC Driver.
I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
1. Downloaded the Oracle Client from the link [URL] . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:Oracleinstantclient_11_2.
2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:Oracleinstantclient_11_2, ran odbc_install.
3.Created the Environment variables as
i) *TNS_ADMIN - C:Oracleinstantclient_11_2*
ii) *Oracle_Home - C:Oracleinstantclient_11_2*
iii) *Edited the PATH variable with ;C:Oracleinstantclient_11_2*
4. Created the tnsnames.ora file in C:Oracleinstantclient_11_2. Its content are as follows.
clarity_dev =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521))
)
(CONNECT_DATA =
(SID = clarity)
)
)
5. From the folder %windir%sysWOW64odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
Data Source Name : claritydev.vip.its.com
TNS Service Name : clarity_dev
User Id: clarity1
When I test connect it, I get error *ORA-12154:*
* TNS:could not resolve the connect identifier specified*
I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
Windows 7
Oracle XE 11gR2
From Windows, I can successfully create and connect with a system data source using an user Oracle account.But when doing then same configuration process I can not create or connect using the 'SYS' account.
i get the error 'ORA-2009: connection as SYS should be as SYSDBA or SYSOPER'.
What is the solution to creating an ODBC DSN for the user 'SYS'?
I work in a large bank in a department that produces reports for different areas of the bank. By and large, we use Microsoft Office products to interface with our Oracle databases.Recently, we had two new databases come online that use Oracle 11g - we were not using any 11g databases before this point. We have two other databases that we use that run on Oracle 10g.
Up until the two new databases were brought in, our reporting was done from systems that used 10g and 9I. We all ran the Oracle 9I driver to connect to them, and it worked very well without issue. With the addition of the 11g databases to our reporting pool, we have been forced to upgrade our ODBC connections to the 11g driver, and it has not gone well at all. I had one query that typically ran in 30 minutes take +13 hours+ to run yesterday. Speed is not the only issue, either; we have sporadic ODBC call fails, crashes, and other general failures to deal with.
Our Oracle DBAs have been trying to solve the issue, but have not yet found a solution, and each day that this goes on we fall further and further behind, as I have daily time-sensitive reports to send out that depend on this data.
One of our DBAs said she read somewhere that Oracle had not included MS Access support in the 11g driver, and that the errors were due to the imperfect connection that the driver created. I don't know of there's any truth to that, but it would provide an explanation for our troubles. We have to use Access for our reporting, as over 90% of our existing reports and processes use Access, and having to change over everything at once is just not feasible.
Is there any way to force the 9I and 11g ODBC connections to coexist, so that we don't have to use the 11g driver for our 10g databases? Or is there a better 11g driver available?
I am using DataBase Express 11g as a development site.I have developed a Delphi GUI to run with it. (32bit). All runs as expected!My associate has a Windows 7 (64bit) machine. Express installation does not supply an ODBC driver. DataBase Express installs without problem, but it is the connectivity that is the problem
I understand that 11g(full) supplies both 32 & 64 OBDC drivers.I do not want to install the full 11g database if it can be avoided.
This is going to be more of a problem the more 64bit machines get into the workplace.Is there an alternative connection method available?
Using Server 2008 Standard Edition 64 bit. We have been running full client (admin) version 10.2.0 and just installed full client (admin) 11.2.0. Both homes are in my path variable with 11.2 first.
From ODBC Administrator, I can can create new system data sources using the 11.2 client driver and the testing widget built into the data source creator says my connection is good to both 10.2 dbs and 11.2 dbs. So the 11.2 odbc driver would seem to be working.
However, from MS Access, I can only see 10.2 drivers and 10.2 data sources, which fail unless I put the 10.2 home in first place in my path.
I cannot find a way to "access" the 11.2 drivers from MS Access. If I try to create a new data source from inside MS Access, I only see the old 10.2 driver.
the need to use 9i Oracle ODBC drivers with 11g? What issues might be raised with this? Our application is using a very old technology and has issues, in certain functional areas, with 11g ODBC, and we found by reverting the driver to 9.0.0.2 it works.
View 6 Replies View RelatedI installed the Oracle instant client version 10.2.0.3 and the corresponding ODBC driver. When I try to add a DSN in ODBC Manager using the Oracle driver, it crashes and I get this message:
"ODBC Administrator has stopped working"
"Windows is checking for a solution to the problem..."
Trying to isolate this problem, I ran odbcad32.exe under DependencyWalker and it worked correctly without crashing. According to the Dependency Walker FAQ, this can be due to a "buffer overrun, stray/bad/freed pointer, etc.". They have a switch to set SET NODEBUG_HEAP=1 to check for this. When I did this, it crashes insider DependencyWalker also.
Recently i have installed oracle 10g.2 in my laptop under Win-7 64bit. But cannot connect oracle from Windows form [C#], Office application[Excel] and odbc. Showing error[Tns could not resolve the connect identifier specified Drivers SQLSetconnectAttr failed ]
Though I can connect oracle from toad and sqlplus and form 6i.
I am having a problem understanding the relationship between users and databases within Oracle. I have a user "big" that logs on successfully on another machine to database "s7s" but on a different machine fails to connect.
The following may be interesting:-
<?php
$SGMDBUsername = "big";
$SGMDBPassword = "big";
$SGMDBName = "s7s";
$conn=OCILogon($SGMDBUsername, $SGMDBPassword, $SGMDBName);
[code].......
If I on the new machine issue the command sqlplus big/big. I successfully connect and see the tables I am looking for.
I installed the Windows 7 64-bit ODBC drivers, but the install does not seem to have made the drivers available to all users, but rather only the installing user. This install is for an image that will be cloned as a virtual machine, so the drivers, client, settings, etc. will need to be available to anyone who logs in.
Is there a way to do the install so that all the settings and files put in by the installer will apply to all users? And if so, how do you do that?
Can application connect with windows authentication to oracle 11.2.0.3 database? if so then how can i set it up!
View 3 Replies View Relatedlet me know the procedure to connect to Oracle Database from Ms-Access.
We are using Windows as Operating System.
I have Oracle 9i DB in windows 2003 server, I want to access this DB from Linux desktop. Is there any 'client software' is available to connect Or procedure to connect the DB.
View 0 Replies View RelatedWe have a .NET application on windows server 2008 32bit using the stored procedures on an Oracle 10g environment. We are trying to deploy the .NET application onto a 64bit x86 Windows server 2008.
We face an error trying to install the x64 version of the Oracle 10g client on windows 2008. The error we get is Problem signature:
Problem Event Name: APPCRASH
Application Name: javaw.exe
Is the x64 version of the Oracle 10g client certified for Windows 2008? Has anyone successfully installed the 64bit version of the oracle client on win2008?
We have a workaround in place with 32 bit version of the client running with the 32 bit version of the .NET application on x64 win2008. However to maximize the infrastructure we need to use the 64 bit version or we would have to turn to MSSQL Server .
can i install oracle 10g at windows 7 ultimate 32 bit
View 1 Replies View RelatedDoes Oracle Database 10.1.0.2 (64-bit) compatible with windows 2003 R2 standard X64 edition with Service pack 2.
View 1 Replies View RelatedThe following error message occured when i connected from a client 11.2.0 (64 bits) to a database installing with a 10g 64 bits.
"Test connection failed because of an error in initializing provider.Oracle client and networking components were not found.These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. "
Is there any requirement like the client has to be installed with a 32 bits version of oracle because Windows restrictions?
The current config:
The server: Windows 2008 (64 bits) with Oracle 10g (64 bits).
The client: Windiws 2003 (64 bits) with Oracle 11.2.0 (64 bits).
I have Tow Virtual Servers (Connect As Cluster) in the Same Computer The Files In the Drive C Different (of the Tow Servers) And Others Like (e,f,q) The Same Files
And There is Database of both Servers That Have Same Name Let say orcl and both database Have same Schema let Say sch
How I can Share The Data when i am insert to table. in the schema sch in the server A i can see Same Data That I have Inserted In the Schema sch in the server B.
Am getting the following error while connecting db from sql dev "network adapter could not establish connection vendor code 20"
FYI - database is up and running fine in sqlplus, and am not able to find the service in lnsrctl. As am using OIM db as service name while its showing CLRExtProc.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Prod
ction
Start Date 21-NOV-2012 20:28:48
Uptime 0 days 0 hr. 27 min. 32 sec
Trace Level off
[code].....
I installed 10.2 client on Windows 2000 Terminal Server. I created the system dsn odbc connection. When connected to the terminal server via RDP as a domain administrator, the odbc connection functions appropriately. When connected to the terminal server console as a standard user, the odbc connection functions appropriately.When connected to the terminal server via RDP as a standard user, I get the error: "Unable to connect SQLState= IM004 [[Microsoft]][[ODBC Driver Manager]] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed"
I have reviewed the numerous other posts regarding this error and I've executed the following recommendations: My oracle_home is defined first in my path environment variable (path - c:oracleclientin;). I select my folder options (there is no security tab, windows 2000) I select sharing, then permissions. I allow 'Everyone' and 'Authenticated Users' full control, change & read permissions. I reboot the server.
How to connect forms 6i with ms access.
View 1 Replies View RelatedHow I can connect database on unix OS and windows what is the deference.
View 7 Replies View RelatedI want to Transfer Oracle Database 11g Release 11.1.0.7.0 on windows 2003 32 bit server to Windows 2008 server 64 bit I have Cold RMAN backup. and directory structure of both server are same Do i need to do anything to change datafile to 64 bit or do i need to apply any change to any object
View 6 Replies View RelatedI've tried to install Oracle 10gR2 (10.2.0.4.0) on Windows server 2008 (64 bit). I just click on installer and a message appears:
Checking Operating system version: must be 5.0,5.1,5.2 or 6.0
Actual 6.1
FAILED <<<<
Exiting Oracle Universal Installer
Press any key to Exit.