SQL & PL/SQL :: ORA-24247 / Network Access Denied By Access Control List (ACL)
Nov 15, 2011
While Running the proc,it's raising the below error.
Error report:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYS.UTL_SMTP", line 115
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "LISTER_SHIFT.SOLN_GENERIC_SENDMAIL", line 33
ORA-06512: at line 1
When I invoke SOAP Web-Service using APEX_WEB_SERVICE.MAKE_REQUEST, then I'm able to get response from web-service. However all German character are replaced by JUNK data. However data is coming fine when I test web-services using SOAP UI.
I tried to invoke web-service using UTL_HTTP. However when I use UTL_HTTP, then I'm getting following error.
ORA-24247: network access denied by access control list
<li> Why German characters are replaced by Junk data while invoking web-service from APEX, while it's working fine from SOAP UI
<li> When I can access web-service successfully using APEX_WEB_SERVICE, then why it's throwing ORA-24247 error when I call using UTL_HTTP?
DB: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production APEX: 4.0.2.00.07 Web-Server: EPG SELECT * FROM NLS_DATABASE_PARAMETERS;
I am having oracle database version 11.2.0.3.0 standard edition, where one of my users requirement is that he wanted to send mails from oracle database but he is getting below error
ORA-24247: network access denied by access control list (ACL) ORA-06512: at "SYS.UTL_TCP", line 17 ORA-06512: at "SYS.UTL_TCP", line 267 ORA-06512: at "SYS.UTL_SMTP", line 161 ORA-06512: at "SYS.UTL_SMTP", line 197 ORA-06512: at "HF_REPORTING.SEND_MAIL", line 12 ORA-06512: at line 18
is it possible to send mails from oracle database in STANDARD Edition?
I got an error while trying to install Oracle 9i on a Win XP machine. So, I decided to wipe out Oracle completely and starting again. I deleted all the Oracle entries from the registry and then tried deleting the folder. But while doing that, I am getting the following error - "Cannot delete oci:Access denied"
The disk is neither write-protected nor is the oci.dll file in use.
I installed oracle 11g successfully in my windows7 operating system. After installation it is not allowing me to access C drive. And in the properties of the drive the memory of C drive is shown 0 bytes. And other applications installed in C drive are also not working. Even after uninstalling oracle 11g access to C drive is denied.
I'm using Oracle10.0 as database for my project and I have installed Toad as front end tool for the Oracle. Now I want to access the database in the network using the Toad.
My question is, is it compulsory that oracle should be installed in every system to access Toad or any thing can I change in the server system to access the database from other systems in the Network.
I managed to upload images to a database server, resize them, copy to the application server and everything worked just fine - the Apex page successfully displayed images. Since last week, things have broken. This is how: there's a directory object which points to application server's directory:
SQL> select * from all_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH ------- ------------------------------ ----------------------------------- SYS SLIKE_4005_UPLOAD d:gisslike_4005_upload --> on a database server SYS SLIKE_4005 \my-iasd$homegisslike_4005 --> on an application server
SQL>
I can use a directory located on a database server:
D:GISSlike_4005_upload>dir photo_resize.* Volume in drive D is RAID Volume Serial Number is 88F2-69D2 Directory of D:GISSlike_4005_upload [code]....
How come it doesn't work? I was absent last week, database server was restarted for some reason (there were Windows' updates which required restarting). After that, all applications (lucky us, just two of them, but in multiple procedures/functions) return FALSE for UTL_FILE.FGETATTR.
We recreated directory objects, but that didn't work (UNC or not, no difference). I Googled quite a lot, read Metalink notes - nothing I did solved the problem.
what these OS updates were about; maybe they are not to be blamed at all. Both servers (database & application) run MS Windows Server 2003 Standard Edition Service Pack 2. In the meantime, a colleague developed a workaround (it uses UTL_HTTP) which works, but it is MUCH slower than the previous UTL_FILE.FGETATTR option.
Why don't we keep these images on the database server (instead of the application server)?I was told that Apache is incapable of accessing mapped network directories so we used what we could.
why the link provided under the How to Build an Access Control Page Download Spreadsheet Data Download the following *.csv file to your local system: In your Web browser go to:
Let's consider such table that all rows fit into single block:
SQL> create table test as select rownum id, '$'||rownum name from dual connect by level <= 530; Table created. SQL> create index i_test on test(id); Index created. SQL> SQL> begin
[code].....
why does approach with full scan take longer even if table occupies only one data block? PS. 11gR2
I have Oracle 11g installed in Windows 7 in a machine, now i have Linux distribution (OS) installed in the same machine(Dual boot). I have created database and have database tables available on the oracle database in Windows 7.
Is it possible to connect to the database from Linux distribution using shell script and access the data, execute a stored procedure etc?
Successfull installation of my Oracle Client was done.When i opened Enterprise Manage Console and i try to login to a database, the following error occurs
" The procedure entry point kpufhndl() could not be located in the dynamic link library OCI.dll "
I have a plan to migrate all MS Access 97 based applications into Oracle as backend database and .Net as Front end. I have done migration of MS Access data to Oracle using export, linked tables, etc. from time to time.
I am having one requirement that i have to restrict the access of oracle database from clients.
suppose i am having 10 users and they have all information related login like username, password, database servers details etc but then also they should not get login into my database, i have to restrict some of them like i have to provide access to 5 users only out of that 10 users.
We have implemented PeopleSoft with an Oracle database. What I need to do is provide clients with access to information stored in that database. Some additional information may come from other external databases, however for right now I am just trying to crawl, not run.
I am working on getting table information from the PS provider, so that I can understand what information is available. I am also working with the clients to determine if there are pieces of information that they need access to which are not currently native to the PS implementation. I need to identify these for step 2 of the process. My superiors were looking at using an SOA architecture using SOAP to move the data. I am open to suggestions and since the project is in its infancy, I have time to alter perceptions before it is too late.
What privilege needs to give the user for ready only access for OEM for limited instances not all instances.
Purpose: our application dba team just want monitor the specific databases that why they asked to create read only access account for OEM for limited databases.
I have linked all my tables in access 2000 to my oracle 9I database, created an odbc connection and I can open smaller tables, however when I try to open tables that are accessing more data from other tables, i get the error "ODBC -- call failed, [Microsoft][ODBC Driver Manager] Function sequence error (#0)" Am I using the wrong ODBC Driver? I installed the Oracle 10g SQL*Plus that should have included the correct driver for this setup.
The strange thing is that I do not think it is a driver issue because I can access the smaller tables in the set.
I have one question regarding database access. I have one database server on which 3 databases are running. I want to restrict each database access for particular group only , so if anyone outside of this group try to access the database then they can not access the database.
Question is end user never login to Database server and access the database , they always connect to the database using different tool like Pl/sql dev,sqldev etc.
Is there any option through which I can make database access within group only ?
select (SELECT MIC.MICR_BANK_NAME FROM M_ECS_MICR_MST MIC WHERE MIC.PK_MICR_ID = BANK.ECS_MICR_CODE) AS BANKNAME, , (SELECT PAY.PAYMENTCODE FROM M_ECS_PAYMENT_MODE PAY WHERE TO_CHAR(PAY.ID) = BANK.ECS_FACTORING_HOUSE) AS [code].....
i have used composite index below column which used in the tbl_bank_statement table.like column name tbl_bank_ statement (policy_ no,ecs_ micr_code,ecs_factoring_house,ecs_mandate_status)
Are you aware of any "Best Practice Document" to grant select accesses to users on databases. These users are developers which select data out of database for the investigation and application bug fix.
From time to time user want more and more access to different tables so that they can do investigation properly.
I am using Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production.I have a table D_GEOGRAPHY_25729 in RDS schema and I have created a role ACC_D_TABLES logging as ADMIN.
Now I have given GRANT SELECT access for table D_GEOGRAPHY_25729 to role ACC_D_TABLES.
There is another schema TRANS in the same database which has the role ACC_D_TABLES. But after logging in this schema, I am not able to query directly from table D_GEOGRAPHY_25729. I need to use like below to access the table.
select * from RDS.D_GEOGRAPHY_25729 Having the correct role ACC_D_TABLES to TRANS schema, why should I use RDS.D_GEOGRAPHY_25729 ? Is it not possible without prefixing the RDS schema name?
It is possible when I create a public synonym for D_GEOGRAPHY_25729 in RDS schema, but if i do so everyone can access this table.
I have a schema TEST1 and it has a view 'TEST_VIEW'. I granted read only permission on the view to TEST2 schema. grant select on TEST_VIEW to TEST2.
But TEST2 is used by an application which requires to read view metadata and then sync with application afterwords start reading. Is there any special permission to grant to access metadata of the view / table.
Probably if I give the installation procedure I went through and specified Error messages,. Installation Option: - Create and configure database was selectedSystem Class: -Sever Class was selected Install Product:-Oracle Database Installation= Succeeded· Prepare= Succeeded· Copy files= Succeeded· Setup files= SucceededOracle database configuration= Succeeded· Oracle Net Configuration Assistant=Succeeded· Oracle database configuration Assistant=Ignored· Oracle configuration Manager Configuration (optional)=Succeeded In the process of the Install Product the following Error messages