Windows :: Getting Error When Installing Oracle Forms On XP
Nov 14, 2010
When i trying to install oracle Forms on Windows XP i am getting following error message . When i click on Setup , Dos windows Opens with following error message .
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before continuing with the installation, at which time they will be rechecked.
I installed oracle 9i from cd's (3 cd pack) all the three cd's installed perfectly but after the installation of these three cd's , a window appears (which is default installation ) in which some below mentioned tools were installed:-
1. Net Configuration Assitant 2. HTTP server etc. when installation of net configuration assistant is going on then a window is popped up saying "jrew.exe stops working" and the process of installation keeps going on and going on..........then when i stopped listener ,then another tool installation starts and after sometime again a window is popped with same message "jrew.exe stops working". means all the 4 tools are not successfully installed ...installing oracle 9i database on windows7.
I am trying to install Oracle 10g Developer suite on windows 7 but the system gives the following error. (file attached). I have successfully installed Oracle 10g Database.
While installing Dev Suite 10g i got the following error:[URL] What should i do? I specified another oracle home name, i have oracle database 11g installed too, and i'm installing dev suite 10g on another location.
When I try to install "Oracle Developer Suite 10g 10.1.2.0.2" on Windows 7, I'm getting error , " Install has encountered an error while attempting to verify your virtual memory settings. verify that the sum of the initial sizes of the paging files is atleast 256 MB."
I already have 9i installed at my desktop.I tried to install oracle 10g version 1. But it got struck with "oracle database configurations assistant" on configuration assistants window.Then I did the below.
1) I clicked stop, but still didn't get stop. 2) And also the window didn't enable the 'Retro' button
I already succeded to setyup Oracle 10 G on my machine , when trying to connect by system/system it does not connect.The listener is OK and instance ok.
We have almost 400 production two-node RAC clusters in the environment I manage - all these sites have databases where the database name is exactly the same, so using Grid Control right now isn't in the cards (and yes - I am working on assigning them all a unique name ). We want to use IBM's BIGFIX to deploy patch 32 on top of 10.2.0.3 for Windows Itanium. BigFix runs as a user different from that used to install the Oracle software originally. There is nothing in the patch notes to suggest that you must use a certain Windows user to install the patch - so the question is, does it matter what Windows User I use as long as they are an 'Administrator' equivalent?
how do you perform mass updates/patches in your Windows server environments? I am looking for examples outside of Grid Control - which I know would work if only my predecessor didn't name these databases the same .
Im trying to install Weblogic/Forms on a Windows 7 x86 machine. Its for the developers to use.But when I run the config.bat and is creating the domain and installing Forms builder and the other stuff the installation hangs at: step restaring admin server started.
Log:
Stopping Derby Server... Starting AdminServer Starting the domain ... DEBUG : Loading the 32 bit dll here DEBUG : Loading DLL : D:/oracle/middleware/as_1/install/config/StartUtil.dll DEBUG : Loaded DLL : D:/oracle/middleware/as_1/install/config/StartUtil.dll
I have tried to install oracle 10g on my Windows XP. But during the installation I have got these errors:
"Enterprise manager configuration failed due to the following error. Error instanting EM configuration files. Refer to the log file U:\...\orcl6\emConfig.log for more details"
"VTA-1000 : The browser could not be launched with the file or
here is the error faced when installing oracle 11gR2,
ERROR: Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/.colorls9rT/OraInstall2013-09-12_03-59-57PM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
i am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
i download oracle 11g for windows 32 bit on my laptop, go through the installation and use the option to crate a starter database. meet all the pre- req and every thing goes smooth. database gets created, use sqlplus to connect ot the database also open the enterprise manager and and also see the GUI after logging in.
now what happens it works fine for a day or some times two and when i reboot the machine and go back and try to open the EM its gives me the error cant find the URL. i have tried it few times and it happens every time. i don't know what i am doing it wrong but for some reason the EM manager doesn't work . i can still log on the database using the sqlplus.
I wish to purchased a new DELL laptop with windows 7. I was told that oracle 10g installation is a problem in windows 7 and is not compatible with windows 7. i was even told that formweb.cfg file also does not work properly.
Is this true. should i have to install windows XP instead of windows 7. some how i am not able to accept this point. I need to buy around 15 laptops for all my officers and it will be a waste if i can't install oracle 10g
When i try to install Oracle forms ver.11g(newest version), after several seconds I have this error: "INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install." I have already installed Weblogic 12c (also newest version) - it works fine, but how can I upgrade it to 10.3.5.0 ?? (I really have to ? It won't work with Weblogic 12c?)
My database is working fine till y.day. But today when I try to connect as sysdba i get the following error- let me know how to resolve the same
C:UsersAdministrator>set ORACLE_SID=sha
C:UsersAdministrator>sqlplus '/ as sysdba' SQL*Plus: Release 11.2.0.1.0 Production on Tue Sep 4 05:11:14 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Enter password: Connected to an idle instance. SQL> startup mount
ORA-27102: out of memory OSD-00026: additional error information O/S-Error: (OS 1455) The paging file is too small for this operation to complete
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim oradb As String = "Data Source=CallTaxi; UserName = SCOTT; Password=TIGER ;" Dim conn As New OracleConnection(oradb) conn.Open() Dim cmd As New OracleCommand
[code]...
Error msg: The type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception.
i installed windows-7 64bit and i try to run my program(that work's with Oracle 11g) i get this error:
Attempt to load Oracle client libraries threw BadImageFormatException this problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed
and from where i can download 64 bit oracle client ?
I am trying to install oracle 11gR2 64-bit on windows XP 64-bit Operating System, after the completion of the steps where I have to enter the path for the ORACLE BASE and other parameters when I click next and then Finish, I receive an error, you can check in the attachment.
I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
1. Downloaded the Oracle Client from the link [URL] . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:Oracleinstantclient_11_2.
2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:Oracleinstantclient_11_2, ran odbc_install.
3.Created the Environment variables as i) *TNS_ADMIN - C:Oracleinstantclient_11_2* ii) *Oracle_Home - C:Oracleinstantclient_11_2* iii) *Edited the PATH variable with ;C:Oracleinstantclient_11_2*
4. Created the tnsnames.ora file in C:Oracleinstantclient_11_2. Its content are as follows. clarity_dev = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521)) ) (CONNECT_DATA = (SID = clarity) ) )
5. From the folder %windir%sysWOW64odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
Data Source Name : claritydev.vip.its.com TNS Service Name : clarity_dev User Id: clarity1
When I test connect it, I get error *ORA-12154:* * TNS:could not resolve the connect identifier specified*
I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
I am getting error while installing Oracle 11g on windows xp. Ora --12638: Credential Retrieval failed error. I understand that some people have got that error after the installation( Changing SQL.Net file).
