My database is working fine till y.day. But today when I try to connect as sysdba i get the following error- let me know how to resolve the same
C:UsersAdministrator>set ORACLE_SID=sha
C:UsersAdministrator>sqlplus '/ as sysdba'
SQL*Plus: Release 11.2.0.1.0 Production on Tue Sep 4 05:11:14 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> startup mount
ORA-27102: out of memory
OSD-00026: additional error information
O/S-Error: (OS 1455) The paging file is too small for this operation to complete
I have a 11g database installed on a windows 2003 server. When I created the database I could not assign more than 2GB for SGA_TARGET where as I have 16GB of RAM available on the server. I created the database with SGA_TARGET as 1.5 GB and Memory_TARGET as 2GB. I could create the database successfully. Later when I again tried to increase SGA_TARGET to 6GB and MEMORY_TARGET to 8GB, I could not start the database. I got below error;
ORA-27102: out of memory
OSD-00022: additional error information
O/S-Error: (OS 8) Not enough storage is available to process this command
Quote:I added /pae in the boot.ini Added AWE_WINDOW_SIZE key to registry as 2000000000 Set use_indirect_data_buffers=true added db_block_buffer=131072 (ie. 2GB DB_BLOCK_SIZE=16kb) java_pool_size= 1000M large_pool_size=1000M shared_pool_size=2000M
I got again the same error
I could not use SGA_TARGET. So is AMM not allowed with AWE?
I got the following error when upgrading from Oracle 9.2.0.8 to Oracle 11.2.0.2 version using catupgrd.sql script.
================================================================= CREATE OR REPLACE PACKAGE BODY kupm$mcp wrapped * ERROR at line 1: ORA-00603: ORACLE server session terminated by fatal error ERROR: ORA-03114: not connected to ORACLE
SP2-1519: Unable to write to the error log table sys.registry$error ORA-04030: out of process memory when trying to allocate 8392728 bytes (pga heap,redo read buffer) ORA-04030: out of process memory when trying to allocate 8392728 bytes (pga heap,redo read buffer) ORA-04030: out of process memory when trying to allocate 8168 bytes (callheap,kcbtmal allocation) Process ID: 81984 Session ID: 1 Serial number: 5
Enter user-name: sys as sysdba Enter password: ERROR: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist
Even i start the Oracle service through the services.msc there are no new entries seen in alert log file of the database.I even changed the init DBNAME. ora file but that file is not being read. what is the normal procedure used by oracle 8i while starting the DB ? Which file should be edited if i come across shared realm memory error.
I am using Oracle 11g On windows 2003 Server, and in the task manager, tnslsnr.exe comsuming approx 1 GB of RAM. After restarting the listener it came to some mb(20-30). but Again after few days it raies and consume lots of memory..
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim oradb As String = "Data Source=CallTaxi; UserName = SCOTT; Password=TIGER ;" Dim conn As New OracleConnection(oradb) conn.Open() Dim cmd As New OracleCommand
[code]...
Error msg: The type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception.
i installed windows-7 64bit and i try to run my program(that work's with Oracle 11g) i get this error:
Attempt to load Oracle client libraries threw BadImageFormatException this problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed
and from where i can download 64 bit oracle client ?
I am trying to install oracle 11gR2 64-bit on windows XP 64-bit Operating System, after the completion of the steps where I have to enter the path for the ORACLE BASE and other parameters when I click next and then Finish, I receive an error, you can check in the attachment.
When i trying to install oracle Forms on Windows XP i am getting following error message . When i click on Setup , Dos windows Opens with following error message .
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1 Passed Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before continuing with the installation, at which time they will be rechecked.
I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
1. Downloaded the Oracle Client from the link [URL] . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:Oracleinstantclient_11_2.
2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:Oracleinstantclient_11_2, ran odbc_install.
3.Created the Environment variables as i) *TNS_ADMIN - C:Oracleinstantclient_11_2* ii) *Oracle_Home - C:Oracleinstantclient_11_2* iii) *Edited the PATH variable with ;C:Oracleinstantclient_11_2*
4. Created the tnsnames.ora file in C:Oracleinstantclient_11_2. Its content are as follows. clarity_dev = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521)) ) (CONNECT_DATA = (SID = clarity) ) )
5. From the folder %windir%sysWOW64odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
Data Source Name : claritydev.vip.its.com TNS Service Name : clarity_dev User Id: clarity1
When I test connect it, I get error *ORA-12154:* * TNS:could not resolve the connect identifier specified*
I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
I installed oracle 9i from cd's (3 cd pack) all the three cd's installed perfectly but after the installation of these three cd's , a window appears (which is default installation ) in which some below mentioned tools were installed:-
1. Net Configuration Assitant 2. HTTP server etc. when installation of net configuration assistant is going on then a window is popped up saying "jrew.exe stops working" and the process of installation keeps going on and going on..........then when i stopped listener ,then another tool installation starts and after sometime again a window is popped with same message "jrew.exe stops working". means all the 4 tools are not successfully installed ...installing oracle 9i database on windows7.
I am getting error while installing Oracle 11g on windows xp. Ora --12638: Credential Retrieval failed error. I understand that some people have got that error after the installation( Changing SQL.Net file).
I am trying to run a trace file with TKPROF. It throws an error :
MEMORY FAULT
The size of the trace file is 8MB. I tried with some other file trace files bigger in size (10MB) than the above file, it works fine. I tried seeing any permission right is required on that trace file is required for the tkprof to excute, but it has got the same permissions like the other trace files.
The problem is that it is not showing any error number or any other Error Description other than "MEMORY FAULT".
While running large report to screen the error is:
"REP-1800: Formatter error. VGS-1701: Not enough memory"
My Observation:When running report to screen, report builder creates 3 temporary files to REPORTS60TEMP folder. When one of the file size reaches to exactly 2GB it gives the above mentioned error and report crashes.
I have visited metalink and get the following:
**************************************************** Problem Description ------------------- You are running a very large report to screen or preview and you get the following errors:
rep-1800 formatter error vgs-1701 not enough memory
Solution Description
Increase the size of the buffer for the report.
i've tried following solutions but problem still there:
1) increase and decrease the size of the buffers 2) Removing total number of pages filed so all pages not formated at once. 3) increase the size of the virtual memory of OS 4) increase the size of the PC to 1 GB
I am using report builder 6i, Oracle 10g and windows XP
I have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options ORA-39002: invalid operation ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ lock_sga boolean FALSE pre_page_sga boolean FALSE sga_max_size big integer 3G sga_target big integer 2G
from what I read I beleive this will initially grab 2GB of memory on startup and will grab up to to 3GB of memory total for the SGA. The "total" memory can be allocated to different peices of the SGA when needed but will never exceed 3GB. Is this correct or would these settings infringe on any available memory on a system that is already tight on memory?
Secondly, what happens if both these values are set to the same value?
try to evaluate it as IMDB cache.I am facing this error repeatedly. I have increased perm size from 6.25 GB to 10 GB.After inserting about 460.000 rows I get the error again. Is it possible that 460.000 rows need 3.75 GB space?
In Oracle database these rows occupy about 200 MB space.
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
Can i know the internal process of initialization of DB into memory in timesten , when a new connection is establishing? Will timesten create tables and indexes in RAM when first connection is established if the RAM policy is default?
want to know the internal functional flow of timesten when any command is fired against it.
We have a .NET application on windows server 2008 32bit using the stored procedures on an Oracle 10g environment. We are trying to deploy the .NET application onto a 64bit x86 Windows server 2008.
We face an error trying to install the x64 version of the Oracle 10g client on windows 2008. The error we get is Problem signature:
Problem Event Name: APPCRASH Application Name: javaw.exe
Is the x64 version of the Oracle 10g client certified for Windows 2008? Has anyone successfully installed the 64bit version of the oracle client on win2008?
We have a workaround in place with 32 bit version of the client running with the 32 bit version of the .NET application on x64 win2008. However to maximize the infrastructure we need to use the 64 bit version or we would have to turn to MSSQL Server .
Database: oracle 9i sitting on a 32 bit machine. Client: windows7 64 bit computer installed oracle 11gr2 client
Is there a way to connect to oracle 9i database from C:WindowsSysWow64odbcad32.exe on windows 7 machine? or what is the possible way to connect to Oracle 9i database?What we need is to run crystal reports from windows 7.
We are running Oracle Apps 11i on Windows 2003 R2 Enterprise SP2 (32 bit). After enabling /3GB switch parameter in Boot.ini file, the OS recognizes the 8GB RAM and consumes it upto 5.6GB during non-peak hours but as workload increases in evening when end users generate auto receipts the same memory usage ratio reaches upto 6GB resulting the OS gets hang and don't respond at all. Inspite of having 2GB free memory it doesn't consume it. We have to shut down it by pressing the power off button and restart it
The system configuration is as under: HP ProLiant DL380 G6 Intel Xeon 2.4 GHz 8GB RAM (4 x 2 GB)
