While installing Dev Suite 10g i got the following error:[URL] What should i do? I specified another oracle home name, i have oracle database 11g installed too, and i'm installing dev suite 10g on another location.
View 3 RepliesWhen I try to install "Oracle Developer Suite 10g 10.1.2.0.2" on Windows 7, I'm getting error , " Install has encountered an error while attempting to verify your virtual memory settings. verify that the sum of the initial sizes of the paging files is atleast 256 MB."
View 4 Replies View Relatedi installed oracle 10g dev suite do i still need to install the db 10g? i tried installing db10g first then the dev suite. On the db 10g i can connect via sqlplus. while i cannot connect on the dev suite, which has a 'sqlplus' too.
i am trying the hr:hr credentials, also tried sys as sysdba it gives me tns protocol adapter error (12560)
i tried to replace the tnsnames.ora of the devsuite with the tnsnames.ora of db10g still didn't work. i also set up the ORACLE_HOME to the db 10g's folder
D:ProgramsOracleproduct10.2.0db_1
why does the devsuite has its own tnsnames.ora. does it have some db server of its own? if it has do i still need to install db 10g?
I just upgraded our server to Oracle Fusion Middleware 11g with Forms and Reports and now I want to update the developers workstation too.
They have Oracle Developer Suite 10g R1 for the moment. The last version of Oracle Developer Suite is 10g R2 and I don't see anything for 11g. All I can find is that it's now in Fusion Middleware 11g and JDeveloper... But, from what I can see, JDeveloper is for Java development, not for Forms/Reports development.
So, do I need to use Oracle Developer Suite 10g R2 or is there a new version of it?
FRM: 10142 The HTTP listener is not running on <computer Name> at port 8889.
How to Solve these Error. When I searching this Problem I found OC4j Instances Startind must. How to start OC4j .
I am trying to install Oracle 10g Developer suite.i am trying to install oracle forms & reports.have downloaded two zip files
ds_windows_x86_101202_disk1,
ds_windows_x86_101202_disk2.
i am in middle of the installation process. installor is not recognising the second one.
i gave the path to the second file. I tried from the disk by writing the file to the disk. but of no use.how do i complete this installation process.
Unable to find the product files specified by the disk labled 'OracleDEVsuite'. Unable to continue installation , please check the value specified in variable FROM_CD_LABEL matches with the value in file disk.label or check if the disk is accessable.
i havn't find any location or relevent info in ht edisk.label file.
Am installed oracle 9i database and Oracle Developer Suite 10g.Am unable to run the Form. When I run the Application Local machine,Blank White Screen Appears No Error Message.Am installed
1.database in F: and Developer Suite in E :
2.I.E 6.0 and 1.31.1.28 J Initiator Version
Am started oc4j instance started.. in run time edit preferences both [URL] and [URL] are given
3. in formsweb.cfg i changed baseHTMLjinitiator=basejpi.htm
i am new and developing my first oracle form.but when i am running this form.it's not running,i have installed already jinit.exe setup.Is this necessary internet connection for running forms.port no. is 8890.
View 20 Replies View Relatedi need Oracle Developer Suite 9i version for windows xp and windows 7.
tell me where i can download it?
How to web color in developer suite 10g?
View 1 Replies View RelatedI am running an Oracle 9i DB with character set : FRENCH_FRANCE.WE8ISO8859P1.
The data inside the DB deals with two languages :
- French and Arabic.
I insert, delete, update data on the DB through one of these tools :
- SQL*PLUS
- Forms 6i
and everything works fine especially with Arabic : characters are interpreted correctly by these tools. Now, I want to use Dev Suite as a new tool.
My problem is with Arabic characters : they are not displayed correctly. On the web form (run by a JRE : JInitiator) the characters are not replaced by "?", they are wrongly interpreted.
Example :
The right interpretation of "Amine" in arabic is : أمين and not : Ããíä.
So, querying a table with Dev Suite returns me Ããíä and not ????.
It seems like the JRE "understands" the characters but doesn't know how to "interpret" the Arabic characters correctly. I've tried to play with the NLS_LANG parameter on the regedit but in vain.
i need download Developer suite 6i i searched on oracle site and didnot found it so i need a link for download
View 4 Replies View RelatedWhen i trying to install oracle Forms on Windows XP i am getting following error message . When i click on Setup , Dos windows Opens with following error message .
Starting Oracle Universal Installer. Checking installer requirements.
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before continuing with the installation, at which time they will be rechecked.
Continue? (y/n) [n]
tips to install the ORACLE 10g,developer 2000 in Windows 7 64 bit.
View 3 Replies View RelatedI have tried to install oracle 10g on my Windows XP. But during the installation I have got these errors:
"Enterprise manager configuration failed due to the following error. Error instanting EM configuration files. Refer to the log file U:\...\orcl6\emConfig.log for more details"
"VTA-1000 : The browser could not be launched with the file or
URL :%EM_UPLOAD_PORT%/em"
here is the error faced when installing oracle 11gR2,
ERROR:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/.colorls9rT/OraInstall2013-09-12_03-59-57PM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
[code]...
I installed oracle 9i from cd's (3 cd pack) all the three cd's installed perfectly but after the installation of these three cd's , a window appears (which is default installation ) in which some below mentioned tools were installed:-
1. Net Configuration Assitant
2. HTTP server etc. when installation of net configuration assistant is going on then a window is popped up saying "jrew.exe stops working" and the process of installation keeps going on and going on..........then when i stopped listener ,then another tool installation starts and after sometime again a window is popped with same message "jrew.exe stops working". means all the 4 tools are not successfully installed ...installing oracle 9i database on windows7.
So as luck would have it my Win XP OS crashed. Yes, its the office laptop and I cannot upgrade the OS for now. Anyhow, I got the whole machine re-imaged and installed 10g which had version 2.1 and everything was okay. I was earlier running apex 4.1.1. I could not find that setup on the oracle site so I downloaded apex 4.2 and ran the installation as per page
[URL].........
Everything went through properly except for step
5. Log back into SQL*Plus (as above) and load images:
SQL> @apxldimg.sql APEX_HOME
[Note: APEX_HOME is the directory you specified when unzipping the file. For example, with Windows 'C:'.]
where it asked me to enter the directory and I entered C:
This is what happened
SQL> @apxldimg.sql
PL/SQL procedure successfully completed.
Enter value for 1: C:
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:/apex/images'
Directory created.
^C
C:apex>
I see a backslash and forward slash so I did a ctrl c . When I tried running the command again - @apxldimg.sql
it just would open the .sql file.
Not sure if this is the issue, but anyhow, after this, when I tried the "go to database page. It just shows a blank page. I was happy with 4.1.1. Is that available anywhere? Maybe I can remove XE and do a fresh install with that.
I am trying to install Oracle 10g Developer suite on windows 7 but the system gives the following error. (file attached). I have successfully installed Oracle 10g Database.
View 6 Replies View Related When i try to install Oracle forms ver.11g(newest version), after several seconds I have this error: "INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install." I have already installed Weblogic 12c (also newest version) - it works fine, but how can I upgrade it to 10.3.5.0 ?? (I really have to ? It won't work with Weblogic 12c?)
i've been trying to connect to the Oracle DB with Oracle SQL Developer.I get a message
State: Test Failed - IO Exception "The network adapter could not establish the connection"
When i go try tnsping 1521 It detects a connection by Oracle Database.And finally i get TNS-03505: Failed to resolve name
When i went into the "services.msc" and tryed to run the "OracleOraDb10g_home1TNSListener"
Got a message: "Error 3: The sytem could not find the specified path"
i install the PL/SQL developer version 9.0.3.1641 on Windows-7 64 bit...i have Oracle 11g on this computer.when i run PL/SQL i got this error:
initialization error
could not initilize "c:\.......oci.dll"
make sure you have the 32 bits oracle client installed..what i need to install and from where to download ? (can i have link to download)
I tried to debug the procedure in Oracle SQL Developer and got the below error,
Connecting to the database TEST.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '****', '4000' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database TEST.
Here,
TEST is my database name,
**** is IP address of my local machine
4000 is the port number, also I have set the debug port range as 4000 - 4999 in SQL DEVELOPER.
firewall is not enabled in my machine.
we have these oracle developer 2000 forms (in .fmx format) in a server and the data of these forms in another server.... the server with the data is very old and is very slow...so we decided to relocate the database(oracle 9i) to a new server..... also, we move the developer 2000 forms from the old server to another server which will serve as the front end to the new data server. how to make the developer 2000 forms on the new front end server to point to the new database on the new data server. how the forms find the data, where this "connection string" is for developer 2000 forms.
View 1 Replies View RelatedI want to try installing Oracle E-business suite on Mandriva But when I try e.g. domainame I get blank.
A) How can I check my domainname ?How can I set it?Here is the hosts file
[Select all] [Show/ hide]
127.0.0.1 localdomain
192.168.0.2 david.domain.com david
I am using oracle developer 10g R2. Now i would like to create a java(jar) function or any other type then would like to add this jar file into my oracle form with a button and when i run this and click on this button then display the message from java function.
View 1 Replies View RelatedMy company has acquired a technology that was written in Oracle Forms 6-8 and am looking to first compile and maintain and then upgrade to either 11g or another platform. The older versions of Oracle Development cannot be downloaded from Oracle's site. Will Oracle provide the link if asked?
View 5 Replies View Relatedi want to download the patch 17 for oracle developer 6i for. any link that i can download this patch from it?
View 5 Replies View Relatedi am running oracle 10g developer release2. i want to set item property false/true in response to a specific action, like disabling text item when check box or radio button pressed.
View 1 Replies View RelatedHow to call dll file in oracle developer 10g or 6i form
View 1 Replies View Related