RAC/ASM Clusterware Installation :: Multiple Cluster Installation In Blade Server?
Dec 6, 2012
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies
ADVERTISEMENT
Aug 15, 2012
I'm a long time Oracle DBA but have only recently started with RAC and have never done any patching or upgrades in a RAC environment.
My environment consists of a 2 node RAC cluster, and 2 physical standbys at separate remote locations.
The database, GI, ASM, and clusterware are all at version 11.2.0.1.
I want to upgrade all components to the latest patchset which is 11.2.0.3. Eventually I also want to apply the latest PSU.
Can I do this without down time? It is a mission critical database where downtime could conceivably endanger lives. If it can't be done with zero downtime, then downtime must be kept to an absolute minimum (minutes, not hours).
I suspect the clusterware needs to be patched first and I do not know whether I can do it on one node at a time.
View 2 Replies
View Related
Sep 8, 2012
I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
View 2 Replies
View Related
Aug 22, 2012
After installing a 4 node cluster 11.2.0.3 with 16 CPU's (4 on each node) on IBM 795 with aix 6.1 each server is using 0.5 CPU with no user load on the system. Running SIHA on one server typically uses 0.05 CPU with no user load on the system.
View 5 Replies
View Related
Dec 7, 2012
im having problems with CRS in a Rac installation. Because of this i cant start the database.I installed Oracle Rac 11.2.0.1 with ASM in a Red Hat 5.8 linux server. Everything was ok until a server reboot. I have 2 nodes, nodo1 and nodo2. Both got rebooted and after that im not able to start the cluster.
All the other resources seem to be just fine .
At nodo1:
[root@nodo1 oracle]# crsctl start cluster -all
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'nodo1'
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'nodo2'
CRS-2676: Start of 'ora.cssdmonitor' on 'nodo1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'nodo1'
CRS-2672: Attempting to start 'ora.diskmon' on 'nodo1'
CRS-2676: Start of 'ora.cssdmonitor' on 'nodo2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'nodo2'
[code]....
View 5 Replies
View Related
Jul 25, 2012
I have been asked to look at making an existing Oracle server resilant. The technology I need to use are:
- Windows 2008 R2 Enterprise SP2
- Microsoft Cluster Services
- Oracle Enterprise 11g release 2
- Oracle Fail-Safe (latest version available)
Unfortunately ApEX 4.1 and Mod_plsql are install on the existing stand-alone server. I'm afraid i know very little about Oracle and ApEX but i need to make a design decision and check fiesablilty.
I believe the HTTP service and Mod_plsql can be moved to a independant server which should work but ApEX itself must remian on the database server (i'm told).Will ApEX work in a MSCS setup? I can only find references to RAC support, RAC is out of scope.
View 0 Replies
View Related
Oct 17, 2013
We have 2 servers running Oracle 11gR2 Window server 2008 64 bit RAC. Today I add new shared disk visible from both servers. All our data placed on ASM partitions, but we need Windows volume for exchanging some data between servers & users;Actions:then i have prepare disk on shared storage from 1st node, run diskmfmt.msc & rescan disks when windows recognizes new hdd, initialize it.create an Extended partition & Logical drive & Assign drive letter. from another nodes, make sure no drive letter is assigned.
Sometimes Windows automatically assign drive letter. If drive letter is assigned, right click & Change drive letter & Remove. from 1st node, format this logical drive using ocfsFormat.exe after execute below scripts i have face some issues
E:app11.2.0gridcfs>ocfsformat /m P: /c 1024 /v DATA /f /d /aReg Get Cluster Name(): Reg Query ValueEx for CFS_CLUSTER_NAME failed with error 203
This indicates that the Cluster Name has not been configured on this node for OCFSThe volume formatted in this condition will be seen by all nodes running OCFS.
View 3 Replies
View Related
Aug 21, 2013
, We are doing a fresh setup on new hardware. On the old hardware Oracle is installed on the SAN and all data files are on there as well. Our new blades are Dell M620 with 2 mirrored 500GB drives and our SAN is Dell Complaint Storage and Complaint TLS Controller. The SAN uses hybrid SSD storage so it keeps the most used data cached.
I'm feeling it would be best to install the Oracle Server on the SAN. On top of that we have a single 620GB fusion IO NAND flash card in the mix. I am still researching the configuration of that.
View 0 Replies
View Related
Oct 1, 2013
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
View 6 Replies
View Related
Jun 7, 2013
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
View 0 Replies
View Related
Jun 15, 2012
current environment
Oracle VM 2 Node RAC cluster
Oracle 11G 11.2.0.3.0
Oracle 11g rel 2 GI
on current 2 node cluster we have GI and RAC db configured Nodes: vmorarac1,vmorarac2
we shutdown vmorarac1 to clone it to vmorarac5
on new node I have changed the hostname to vmorarac5 In /etc/sysconfig/network-scripts/ifcfg-eth0 change ip to new ip and same for /etc/sysconfig/network-scripts/ifcfg-eth1 152.144.199.210,152.144.199.211
mad echanges to /etc/hosts on vmorarac1/2 for 2 new IP address assigned to vmorarac5
152.144.199.171 vmorarac1.pbi.global.pvt vmorarac1
192.168.2.30 vmorarac1-priv.pbi.global.pvt vmorarac1-priv
152.144.199.184 vmorarac1-vip.pbi.global.pvt vmorarac1-vip
[Code]....
Query is is that all ok to reboot the new node to reflect changes as below and change the hostname to vmorarac2
152.144.199.210 vmorarac2.pbi.global.pvt vmorarac2
192.168.2.32 vmorarac2-priv.pbi.global.pvt vmorarac2-priv
152.144.199.211 vmorarac2-vip.pbi.global.pvt vmorarac2-vip
hostname change in /etc/sysconfig/network
On new node vmorarac5, there is alreay software for RAC DB and GUI cloned from vmorarac1
addnode.sh is used to add existing node, but as part of pre-requisite configuratoin is there any config step missing
View 3 Replies
View Related
Aug 28, 2013
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
View 15 Replies
View Related
Nov 17, 2013
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
View 0 Replies
View Related
Jul 11, 2013
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies
View Related
Sep 16, 2013
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies
View Related
Feb 3, 2013
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
View 2 Replies
View Related
Dec 3, 2012
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies
View Related
Aug 14, 2013
I have a question: Did someone have in production two or more RAC 11gR2 on different Solaris LDOMs on the same physical server?.
View 0 Replies
View Related
Jun 13, 2012
I have a production database, the manager ask me to take the test Server to make an Oracle RAC with the Production Server.
Can I Install the RAC 11g R1 only in one Server (test server) ? and then include the Second Server (production)?
View 3 Replies
View Related
Oct 27, 2010
Steps for installing Oracle Cluster 10?
View 9 Replies
View Related
Sep 7, 2011
I am installaing oracle RAC 11.2.0.1. After I installed the grid infrastructure, when I ran root.sh, I got below errors;
ASM failed to start. Check /d1/app/grid/cfgtoollogs/asmca/asmca-1109068AM4612.log for details.
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
[Code]....
View 9 Replies
View Related
Jul 9, 2012
Is it possible to upgrade GI 11.2.0.1 Enterprise Edition version to 11.2.0.3 STANDARD EDITION?
We have 2 Node RAC with 10.2 DB SE. Last time I think by mistake or not knowing the licensing information GI was upgraded to EE 11.2.0.1 by somebody or may be whatever version of GI is used, it has nothing to do with the license?
I have heard that I can upgrade Grid Infrastructure, but to Standard Edition. Does GI also comes with SE and also just want to know that can I perform this upgrade?
View 11 Replies
View Related
Jul 4, 2012
2 Node RAC Prod. GI= 11.2..0.1 , DB = 10.2.0.4 SE
I want to upgrade (out of place) Grid Infrastructure to latest version of 11.2.0.3 and then PSU on top of that.
GI HOME and DB HOME are separated. Database I want to upgrade later on, not with this clusterware upgrade. I have download p10404530_112030_Linux-x86-64_3of7.zip from MOS for upgrading GI.
grid@db1p [rec]: /home/grid > crsctl query crs softwareversion
Oracle Clusterware version on node [db1p] is [11.2.0.1.0]
grid@db1p [rec]: /home/grid > crsctl query crs activeversion
Oracle Clusterware active version on the cluster is [11.2.0.1.0]grid@db1px [ec]: /home/grid > sqlplus / as sysasm
[code]....
1) Is this the correct p10404530_112030_Linux-x86-64_3of7.zip to upgrade GI from 11.2.0.1 to 11.2.03?
2) Do I need a COMPLETE DOWNTIME to upgrade GI on 2 node RAC where DB is STANDARD EDITION but Clusterware is 11.2 as you have seen above..
3) Will this ASM version will also be upgraded along with GI upgrade installer or it must be upgrades separately after GI Upgrade?
View 4 Replies
View Related
Dec 27, 2012
When I use 'ONSCTL PING' to test the ons status, it says: configure localport and remoteport directives and attempt to start ONS server again.ons is not running.The content of D:app11.2.0gridopmnconfons.config is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The content of D:app11.2.0gridopmnconfons.config.rac2 is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The configuration file is almost the same in rac1.But the output of 'srvctl status nodeapps' is :
ons is enabled
ons is running on node1:rac1
ons is running on node2:rac2
View 2 Replies
View Related
Oct 13, 2013
tried to mount a big endian asm disk (AIX for example) on little endian env (linux x86)? I have a disk that KFED is able to read but ASM is unable to mount it due to endianess incompatibility.
from the KFED read: kfbh.endian: 0 ; 0x000: 0x00kfbh.hard: 130 ; 0x001: 0x82kfbh.type: 1 ; 0x002: KFBTYP_DISKHEADkfbh.datfmt: 1 ; 0x003: 0x01kfbh.block.blk: 0 ; 0x004: blk=0kfbh.block.obj: 128 ; 0x008: file=128kfbh.check: 1999209486 ; 0x00c: 0x7729840ekfbh.fcn.base: 0 ; 0x010: 0x00000000kfbh.fcn.wrap: 0 ; 0x014:
[code]...
View 8 Replies
View Related
Jun 15, 2013
We try to upgrade the 10g to 11g oracle instance and asm instance.Below steps we r done;
1)First we are install the 11.2.0.3 database and grid infrastructure in separate home.
2)after that i try to upgrade asm instance so i drop old 10g asm localconfig cd $ORACLE10g_HOME./localconfig deletecd $ORACLE11g_HOME./localconfig add but here i can not find localconfig Note:database and grid installed without error....
3)Even we are try dbua but it run 10g dbua we are not able to run dbua for 11g
4)inventory is corrupted how to recreate inventory
5)provide the steps for upgrade 10g asm to 11g asm
View 3 Replies
View Related
Mar 22, 2013
Can I use 64 bit OS (Solaris x86) in my PC with VMware. As many software available in 64 bit but not in 32bit.
If I install 64 bit OS , Oracle DB whether it can crash the system or not
View 4 Replies
View Related
Sep 24, 2012
I need some professional article about how to configure DNS for using Oracle GNS with explanation.
I want to understand the role of DNS server for GNS.
I tried to search but what I found is not enough or they are not written with accuracy.
View 2 Replies
View Related
Dec 6, 2012
I'm installing Oracle RAC 11.2.0.3 on RHEL6.3. Since the asmlib RPMs are not provided any more (for RHEL6) I am now able to use either a whole disk or a partition.
which method is the better one, what are the advantages and disadvantages of these methods?
View 1 Replies
View Related
Nov 11, 2013
ENV: Oracle 10g R2 EE on ADM, RHEL 5.8 64bit
Is there a difference performance wise if ASM gets two LUNs of 1.7TB (DATA) and 0.6TB (FRA) respectively compared to 17 LUNs of 100GB each (for DATA) and 6 LUNs of 100GB each (for FRA)? Is there a recommended size from Oracle?
View 6 Replies
View Related
