I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
After installing a 4 node cluster 11.2.0.3 with 16 CPU's (4 on each node) on IBM 795 with aix 6.1 each server is using 0.5 CPU with no user load on the system. Running SIHA on one server typically uses 0.05 CPU with no user load on the system.
View 5 Replies View RelatedI have an issue during the database configuration using DBCA at 85% it blocs, then it displays an error asking to reconfigure ORACLE_UNQNAME.
View 6 Replies View RelatedWe have 2 servers running Oracle 11gR2 Window server 2008 64 bit RAC. Today I add new shared disk visible from both servers. All our data placed on ASM partitions, but we need Windows volume for exchanging some data between servers & users;Actions:then i have prepare disk on shared storage from 1st node, run diskmfmt.msc & rescan disks when windows recognizes new hdd, initialize it.create an Extended partition & Logical drive & Assign drive letter. from another nodes, make sure no drive letter is assigned.
Sometimes Windows automatically assign drive letter. If drive letter is assigned, right click & Change drive letter & Remove. from 1st node, format this logical drive using ocfsFormat.exe after execute below scripts i have face some issues
E:app11.2.0gridcfs>ocfsformat /m P: /c 1024 /v DATA /f /d /aReg Get Cluster Name(): Reg Query ValueEx for CFS_CLUSTER_NAME failed with error 203
This indicates that the Cluster Name has not been configured on this node for OCFSThe volume formatted in this condition will be seen by all nodes running OCFS.
I want to install an active / passive Oracle Configuration for our new 11gR2 system. We do not want to go full blown RAC as yet. We already have an 11gR2 instance that I plan to CLONE to the production server(s).
So. detail the steps that I need to follow .
i.e.
configure the 2 servers (VIFs/Interconnects)
Install GRID/CRS
Clone over the database (do I do this as a SINGLE NODE RAC?)
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI am having 2 data centers within 1/2 km distance. And we kept each vote disk in once site. In case of site failure, the cluster needs a 3rd set. We don't have 3rd site.
Last open world, Oracle announced that oracle storage on cloud as announced. If I get the small space on the cloud, can i put my 3rd vote disk on the cloud?
I have just installed Virtual Box 4.2.16 for Windows hosts to my Windows 7 laptop. I created virtual machine and installed Oracle Linux 6.4. Now I want to have this virtual Linux OS on the existing network. My Windows 7 is part of this network.
Let's say, my Windows 7 machine's IP address is 10.11.5.46. I want to set 10.11.5.201 to this virtual Linux OS and make it ping able from both way (host - guest). To do this, I used Bridged Adapter. I selected Intel(R) 82567LM Gigabit Network Connection. I believe this is LAN adapter of my actual host machine. Then also I setup network to the virtual Linux OS, such as static IP address, subnet mask, and default gateway. Then I rebooted the virtual machine.
Now, any machines on the network, including my Windows 7 host machine, can ping to my virtual Linux OS (10.11.5.201), but from virtual Linux OS can't ping to any machine on the network, except for default gateway. Also from virtual Linux I can't get to the Internet via Fire Fox browser.
I'm a long time Oracle DBA but have only recently started with RAC and have never done any patching or upgrades in a RAC environment.
My environment consists of a 2 node RAC cluster, and 2 physical standbys at separate remote locations.
The database, GI, ASM, and clusterware are all at version 11.2.0.1.
I want to upgrade all components to the latest patchset which is 11.2.0.3. Eventually I also want to apply the latest PSU.
Can I do this without down time? It is a mission critical database where downtime could conceivably endanger lives. If it can't be done with zero downtime, then downtime must be kept to an absolute minimum (minutes, not hours).
I suspect the clusterware needs to be patched first and I do not know whether I can do it on one node at a time.
I have a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit.
When I install Oracle Database 11gR2 and click on "SETUP" file, a message box namely JAVA VIRTUAL MACHINE LAUNCHER and display below error;
_"Could not find the main class. Program will exit."_
Same setup runs successfully on my server with Windows Server 2008 Enterprise.
Is it 11gr2 supports a virtual machine which have Windows Server 2008 R2 Datacentre 64-bit ? or some other?
im having problems with CRS in a Rac installation. Because of this i cant start the database.I installed Oracle Rac 11.2.0.1 with ASM in a Red Hat 5.8 linux server. Everything was ok until a server reboot. I have 2 nodes, nodo1 and nodo2. Both got rebooted and after that im not able to start the cluster.
All the other resources seem to be just fine .
At nodo1:
[root@nodo1 oracle]# crsctl start cluster -all
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'nodo1'
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'nodo2'
CRS-2676: Start of 'ora.cssdmonitor' on 'nodo1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'nodo1'
CRS-2672: Attempting to start 'ora.diskmon' on 'nodo1'
CRS-2676: Start of 'ora.cssdmonitor' on 'nodo2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'nodo2'
[code]....
I have been asked to look at making an existing Oracle server resilant. The technology I need to use are:
- Windows 2008 R2 Enterprise SP2
- Microsoft Cluster Services
- Oracle Enterprise 11g release 2
- Oracle Fail-Safe (latest version available)
Unfortunately ApEX 4.1 and Mod_plsql are install on the existing stand-alone server. I'm afraid i know very little about Oracle and ApEX but i need to make a design decision and check fiesablilty.
I believe the HTTP service and Mod_plsql can be moved to a independant server which should work but ApEX itself must remian on the database server (i'm told).Will ApEX work in a MSCS setup? I can only find references to RAC support, RAC is out of scope.
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
I have a question: Did someone have in production two or more RAC 11gR2 on different Solaris LDOMs on the same physical server?.
View 0 Replies View Relatedcurrent environment
Oracle VM 2 Node RAC cluster
Oracle 11G 11.2.0.3.0
Oracle 11g rel 2 GI
on current 2 node cluster we have GI and RAC db configured Nodes: vmorarac1,vmorarac2
we shutdown vmorarac1 to clone it to vmorarac5
on new node I have changed the hostname to vmorarac5 In /etc/sysconfig/network-scripts/ifcfg-eth0 change ip to new ip and same for /etc/sysconfig/network-scripts/ifcfg-eth1 152.144.199.210,152.144.199.211
mad echanges to /etc/hosts on vmorarac1/2 for 2 new IP address assigned to vmorarac5
152.144.199.171 vmorarac1.pbi.global.pvt vmorarac1
192.168.2.30 vmorarac1-priv.pbi.global.pvt vmorarac1-priv
152.144.199.184 vmorarac1-vip.pbi.global.pvt vmorarac1-vip
[Code]....
Query is is that all ok to reboot the new node to reflect changes as below and change the hostname to vmorarac2
152.144.199.210 vmorarac2.pbi.global.pvt vmorarac2
192.168.2.32 vmorarac2-priv.pbi.global.pvt vmorarac2-priv
152.144.199.211 vmorarac2-vip.pbi.global.pvt vmorarac2-vip
hostname change in /etc/sysconfig/network
On new node vmorarac5, there is alreay software for RAC DB and GUI cloned from vmorarac1
addnode.sh is used to add existing node, but as part of pre-requisite configuratoin is there any config step missing
I have a RAC working with SAN raw devices presented to ASM and working fine. My situation has changed since the installation of the RAC. Now I need a shared storage (with a filesystem) to upload some files (so DB can read these as external tables) for this I have used OCFS2.
As you can see I have Oracle RAC on raw ASM + shared storage on OCFS2 and for the time been all seems to be well and working perfectly. Can these coexist with out effecting the other?
I would like to build a 2-node cluster without RAC. I desire to operate 2 Oracle database instances for use by 2 separate applications. I plan to run Linux. I would like node1 to act as the primary server for the databases in application1 and node2 to act as the failover server for the databases in application1. Conversely, I want node2 to act as the primary server for databases in application2 and node1 to act as the failover server for databases in application2. Can Oracle SE and Oracle Clusterware be configured in this this way?
View 2 Replies View RelatedYesterday I was installing 11.2.0.2 patch to our Oracle 11gR2(11.2.0.1.0) Two node RAC cluster on OEL 5.4 x86 Linux.Before installing I have read [URL] support note which says "Note: All Oracle Grid Infrastructure patch set upgrades must be out-of-place upgrades, in which you install the patch set into a new Grid home. In-place patch set upgrades are not supported. "
During Installation I found following Installation Option :
1) Install and configure Oracle grid Infrastructure for a cluster
2) Configure Oracle Grid Infrastructure for a Standalone Server
3) Upgrade Oracle Grid Infrastructure or Oracle Automatic Storage Management
4) Install Oracle Grid Infrastructure Software Only
Which option should I have to choose here ?
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedMy application consists of Oracle RAC and Oracle Enterprise Manage (OEM) on same two nodes. I am exploring the idea of utilizing Oracle Clusterware (which is already installed with Oracle RAC) to support OEM in active passive mode.
Here is the scenario.
Node A running Solaris 10.9 on SPARC and Node B running Solaris 10.9 on SPARC.
Node A and Node B are both Oracle RAC Nodes ( Active Active ) which use Shared Storage for Oracle using ASM.
Node A and Node B will run Oracle Enterprise Manager (OEM) Application in active passive scenario which will be using Oracle RAC for its database. So, both Oracle RAC and OEM are sharing same server A and B for its clusters.
Now, OEM application need a third party clusterware to fail it over. It needs clusterware to provide floating VIP and shared folder of the size of 20GB which will keep software libraries. If node A goes down, node B have access to same libraries and will come up as active.
Do you know if oracle clusterware which comes with Oracle RAC can support OEM for failing over i.e. it can provide floating VIP and shared file system?
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedSteps for installing Oracle Cluster 10?
View 9 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedI am installaing oracle RAC 11.2.0.1. After I installed the grid infrastructure, when I ran root.sh, I got below errors;
ASM failed to start. Check /d1/app/grid/cfgtoollogs/asmca/asmca-1109068AM4612.log for details.
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
[Code]....
I have a Windows 2008 R2 SP1 2 node active/passive cluster with fail safe 3.4.2 installed. I also have 11G database software installed. My problem is I am unable to successsfully add an oracle virtual IP to the oracle group within fail safe. I receive the below error when I try. I need to get this resolved so that I can add my databases to the cluster.
Oracle Fail Safe Manager
FS-10890: Oracle Services for MSCS failed during the create operation
FS-11220: Failed to create the virtual address
FS-10012: Failed to bring the cluster resource Network Name HHVHAVELP01 online. Check the Windows event log for messages.
FS-10726: Resource Network Name HHVHAVELP01 is in a failed state
I don't see any message in the event log when I check...
I need some professional article about how to configure DNS for using Oracle GNS with explanation.
I want to understand the role of DNS server for GNS.
I tried to search but what I found is not enough or they are not written with accuracy.
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
I have been reading a lot of documentation regarding oracle services and I have an ok understanding of how they work. However, I have a general question regarding configuring services using Oracle RAC. For instance, if I have a 2 node oracle 11GR2 RAC on a Linux Redhat server. I have an application that connects to a service I have created. I create the service as follows.
srvctl add service -d ORCL_RAC -s APP_SERVICE -r ORCL_RAC1,ORCL_RAC2
The tnsnames contains:
APP_OLTP =
(DESCRIPTION =
(LOAD_BALANCE = ON)
(FAILOVER = ON)
[code]...
My questions are as follows:
1) When I do a 'srvctl status service -d ORCL_RAC', should I see the service running on both nodes of the RAC? Or does it run only one node, then it will fail over to the other when needed?
2) If I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 is only running on node1 and RAC_SRV2 is only running on node2. There are two applications sharing the same database, one application is using RAC_SRV1 and the other application is using RAC_SRV2. Am I correct in thinking that there is no failover available here? If node1 goes down, the application connecting to RAC_SRV1 will not be able to connect to node2 right?
3) In the case of the scenario in question 2 above, would it be best practise to simply create one service and have both applications connecting to the one service? Could I configure the one service to point connections from one application to node1 and connections from the other application to node2?
