Yesterday I was installing 11.2.0.2 patch to our Oracle 11gR2(11.2.0.1.0) Two node RAC cluster on OEL 5.4 x86 Linux.Before installing I have read [URL] support note which says "Note: All Oracle Grid Infrastructure patch set upgrades must be out-of-place upgrades, in which you install the patch set into a new Grid home. In-place patch set upgrades are not supported. "
During Installation I found following Installation Option :
1) Install and configure Oracle grid Infrastructure for a cluster
2) Configure Oracle Grid Infrastructure for a Standalone Server
3) Upgrade Oracle Grid Infrastructure or Oracle Automatic Storage Management
4) Install Oracle Grid Infrastructure Software Only
I am trying to create a rac setup on oracle 10.2. through NFS cluster configuration .i succeeded with the installtion of cluster configuarion and installation of oracle software ,but when i am trying to create database ,
I am installaing oracle RAC 11.2.0.1. After I installed the grid infrastructure, when I ran root.sh, I got below errors;
ASM failed to start. Check /d1/app/grid/cfgtoollogs/asmca/asmca-1109068AM4612.log for details.
Configuration of ASM failed, see logs for details Did not succssfully configure and start ASM CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
The installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh WARNING: directory '/home/oracle/product' is not owned by root WARNING: directory 'home/oracle' is not owned by root Checking to see if Oracle CRS stack is already configured /etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
My application consists of Oracle RAC and Oracle Enterprise Manage (OEM) on same two nodes. I am exploring the idea of utilizing Oracle Clusterware (which is already installed with Oracle RAC) to support OEM in active passive mode.
Here is the scenario.
Node A running Solaris 10.9 on SPARC and Node B running Solaris 10.9 on SPARC. Node A and Node B are both Oracle RAC Nodes ( Active Active ) which use Shared Storage for Oracle using ASM.
Node A and Node B will run Oracle Enterprise Manager (OEM) Application in active passive scenario which will be using Oracle RAC for its database. So, both Oracle RAC and OEM are sharing same server A and B for its clusters.
Now, OEM application need a third party clusterware to fail it over. It needs clusterware to provide floating VIP and shared folder of the size of 20GB which will keep software libraries. If node A goes down, node B have access to same libraries and will come up as active.
Do you know if oracle clusterware which comes with Oracle RAC can support OEM for failing over i.e. it can provide floating VIP and shared file system?
I'm trying to install Oracle 11gR2 RAC on AIX, do we need to turn on Multicasting, can we install without multicasting? Also can I have the ASM disk with external redundancy for OCR and Voting Disk?
I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
I tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.
[URL]
Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.
I have a table called dept table with nested collection as below. Nested Table Collection:
create or replace type courselist as table of varchar2(64) Table Using Nested Table Collection: CREATE TABLE "FCSDWH_STG"."DEPT" ( "NAME" VARCHAR2(20 BYTE), "DIRECTOR" VARCHAR2(20 BYTE), "OFFICE" VARCHAR2(20 BYTE), "COURSES" "FCSDWH_STG"."COURSELIST" ) Content Of Table:NameDirectorofficecoursesAccountingJames CharlesUNOFCSDWH_STG.COURSELIST('natural science','chemistry','Computer Science','Computer Science')
I am trying to select and print an element from nested table collection using below plsql block.
MY_COURSE VARCHAR2(64 CHAR); BEGIN SELECT courses INTO MY_COURSE FROM TABLE(SELECT COURSES FROM DEPT) where courses='chemistry'; DBMS_OUTPUT.PUT_LINE(MY_COURSE); END; Error Message: PL/SQL: ORA-00904: "COURSES": invalid identifier
i want to install oracle real application cluster using shared file system and not using ASM. we are not creating LUN for our data to kept and SAN admin will give us NFS share where we will place the database.
when i'm creating ASM instance, i'm getting an error
Quote:ora-29701: unable to connect to cluster manager
for this there were some workaround given to start css.
i tried everything from /etc/init.d/init.cssd start/enable but nothing worked, then i tried with executing
localconfig delete localconfig add====>it failed and recommended to go for reset option
when i executed localconfig reset i get this following error:
Quote: [root@rac2 bin]# sh localconfig add Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. Configuration for local CSS has been initialized
It appears that the Oracle RAC cluster does not recognize the 'dba' group membership assignment to a user, unless it is assigned as the user's primary group.This also only affects newly created users, older users do not have this issue.
This affects us in the following way:
We are unable to create new cluster resources with the SAPCTL tool with the <sid>adm user.
When we try to create a resource using sapctl as the <sid>adm user we receive the following error:
CRS-0259: Owner of the resource does not belong to the group. SAP ABAP VIP creation failed.
The description of this error is that the resource owner (<sid>adm) is not a member of the group defined by 'osdbagrp' (what the cluster expects group membership for os users to control cluster resources), in our case this group is 'dba'.This is despite the user definitely being a member of the group.
Resource creation workaround:We are able to get around the resource creation by creating the resources either as root user, or by assigning 'dba' as <sid>adm's primary group.However, although we are able to control the VIP cluster resource, we are unable to control the other SAP enqueue resources as we assume that they need to be created by a user with 'sapsys' as a primary group (i.e. the resources do not start or it appears that there is not even an attempt to start the resources as there are no SAP startup logs created).
We have attempted multiple variations of creating and controlling cluster resources: changing <sid>adm primary group, changing cluster resource permissions, with nothing working for us.
The bottom line is that we need to be able to create these sapctl resources with a <sid>adm user that has 'sapsys' as a primary group while also being a member of the 'dba' group.
RAC installation on vmware is failing with following errors. I followed below link for installation. URL..... Found the following errors:
[root@rac2 ~]# cd /crs/oracle/bin/ [root@rac2 bin]# ./vipca PRKR-1062 : Failed to find configuration for node rac1 PRKR-1062 : Failed to find configuration for node rac1 [code]....
The "/crs/oracle/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.The "/crs/ oracle/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
[root@rac2 bin]# /crs/oracle/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200 [root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect PRIF-10: failed to initialize the cluster registry [root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect PRIF-10: failed to initialize the cluster registry
I have recently setup a 2 node Rac on oracle linux 5.4 with oracel 11gR2, the installation went smoothly and all the cluster resources are up and running however the data is not syncing across the nodes, when I create a table it shows up on the other node but when I insert rows into the tables they don't show up on the other node and when I restart the cluster the inserted rows are completely gone even from the node where I inserted them.
I am installing 11gr2 11.2.0.2 grid infrastructure software. while running root.sh on node1 it got failed.
Start of resource "ora.crsd" failed CRS-2672: Attempting to start 'ora.crsd' on 'rac1' CRS-5017: The resource action "ora.crsd start" encountered the following error: Start action for daemon aborted CRS-2674: Start of 'ora.crsd' on 'rac1' failed CRS-2679: Attempting to clean 'ora.crsd' on 'rac1' CRS-2681: Clean of 'ora.crsd' on 'rac1' succeeded CRS-4000: Command Start failed, or completed with errors. Clusterware exclusive mode start of Clusterware Ready Services failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6475. /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
I have 2 node 11gR2 RAC running on AIX 6.1, after I shutdown the database and restart crs using crsctl start crs, ASM instance comes back up but not the database and I had to start the database using srvctl, isn't that the database should come up when I start the crs?
