I am trying to create a rac setup on oracle 10.2. through NFS cluster configuration .i succeeded with the installtion of cluster configuarion and installation of oracle software ,but when i am trying to create database ,
View 2 RepliesThe installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh
WARNING: directory '/home/oracle/product' is not owned by root
WARNING: directory 'home/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
the ./cluvy shows the cluster is valid.
While installing 11g oracle grid cluster software. I am getting below error.
[INS-40724] No locally defined network interface matches the SCAN VIP subnet.
i have given scan name as scan-cluster.invent
host-name virtual ip name
rac3 rac3-vip
rac5 rac5-vip
I am able to ping rac3 and rac5 from both nodes.
MY /etc/host file look like this.
192.168.2.133 rac3.invent.com rac3
192.168.2.132 rac3-priv.invent.com rac3-priv
192.168.122.1 rac3-vip.invent.com rac3-vip
192.168.2.136 rac5.invent.com rac5
[code]...
ssh connectivity everything works fine.
I have installed oracle 10g in D drive . The installation says it is successful, without asking the database name or the password . I have followed the steps given in the attached file .
However it is not asking the database name or password ( no configuration set up is appearing for the user to interact with the system ) . So, after installation I can not give the username and password .
Are Oracle cluster and Oracle clusterware are same and has same in meaning in RAC ?
View 6 Replies View RelatedSteps for installing Oracle Cluster 10?
View 9 Replies View RelatedYesterday I was installing 11.2.0.2 patch to our Oracle 11gR2(11.2.0.1.0) Two node RAC cluster on OEL 5.4 x86 Linux.Before installing I have read [URL] support note which says "Note: All Oracle Grid Infrastructure patch set upgrades must be out-of-place upgrades, in which you install the patch set into a new Grid home. In-place patch set upgrades are not supported. "
During Installation I found following Installation Option :
1) Install and configure Oracle grid Infrastructure for a cluster
2) Configure Oracle Grid Infrastructure for a Standalone Server
3) Upgrade Oracle Grid Infrastructure or Oracle Automatic Storage Management
4) Install Oracle Grid Infrastructure Software Only
Which option should I have to choose here ?
I am configuring two node RAC on oracle virtual box. Did its mandatory to configure DNS on both nodes before Rac installation? Whats the purpose of DNS in RAC. And if its mandatory did i have to configure DNS on each node separately?
View 1 Replies View RelatedI got following error on Oracle 10.2.0.4.0 RAC on solaris 10
Oracle clsomon failed with fatal status 12.
Oracle CRS failure. Rebooting for cluster integrity.
I think this problem in 11g but I am using 10g.
I am installaing oracle RAC 11.2.0.1. After I installed the grid infrastructure, when I ran root.sh, I got below errors;
ASM failed to start. Check /d1/app/grid/cfgtoollogs/asmca/asmca-1109068AM4612.log for details.
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
[Code]....
What is the different between the new RAC feature - real application cluster and OPS... for me it sound the same..
View 3 Replies View RelatedI am doing the following steps for stopping the Oracle RAC Services on a 2 node.(OS is Windows 2008 Release 2).
srvctl stop database -d <database_name>
Node 1:
crsctl stop has
Node 2:
crsctl stop has
But i am getting error like Oracle HAS Service not stopped successfully. Finally what i did was stopped the OHAS Service from Windows Services.
which is the right procedure to have a clean stopping of RAC Services in 11g R2.
My application consists of Oracle RAC and Oracle Enterprise Manage (OEM) on same two nodes. I am exploring the idea of utilizing Oracle Clusterware (which is already installed with Oracle RAC) to support OEM in active passive mode.
Here is the scenario.
Node A running Solaris 10.9 on SPARC and Node B running Solaris 10.9 on SPARC.
Node A and Node B are both Oracle RAC Nodes ( Active Active ) which use Shared Storage for Oracle using ASM.
Node A and Node B will run Oracle Enterprise Manager (OEM) Application in active passive scenario which will be using Oracle RAC for its database. So, both Oracle RAC and OEM are sharing same server A and B for its clusters.
Now, OEM application need a third party clusterware to fail it over. It needs clusterware to provide floating VIP and shared folder of the size of 20GB which will keep software libraries. If node A goes down, node B have access to same libraries and will come up as active.
Do you know if oracle clusterware which comes with Oracle RAC can support OEM for failing over i.e. it can provide floating VIP and shared file system?
We have a request to configure data guard for databases on the production server. Here is my situation:
We have a backup strategy in place where the backups are being taken on a regular basis. Archive logs are deleted as soon as they are backed up.
My question now is , is there a way of configuring the Data guard in such a way that there would be no change to existing backup strategy (RMAN) and still duplicate the archive logs to another destination and not delete the archive logs by RMAN backup process on that destination while the first destination is deleted.
We will be deleting the logs in the second archive destination using a script which checks if the logs were applied.
I have a SAN Storage device of 8TB size . I am new to rac setup ,i dont know how to configure the SAN device for RAC SETUP on ASM..how to configure the SAN device for RAC setup on ASM
How many disks we need to have? which and sholud be on ASM ? how to impliment raid10 for database file disk and raid5 for arhcive log files
I get following error when i'm configuring ASM.
I'm using Enterprise Linux and Oracle 11.1.0.6.0
[U]Note:[/U]
[root@RAC1 ~]# rpm -qa|grep asm
oracleasm-2.6.9-78.0.0.0.1.EL-2.0.3-2
oracleasm-support-2.0.3-2
only these two packages in my server. should i have to install oracleasmlib??
[root@RAC1 ~]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM librarydriver. The following questions will determine whether the driver isloaded on boot and what permissions it will have. The current valueswill be shown in brackets ('[]'). Hitting <ENTER> without typing an answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
[B]Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED][/B]
I don't have this package in my installation cd, when i searched in the web i could not find
I must setup RAC 11g but I haven't meta link account to download cluster ware.
View 2 Replies View RelatedI have a table called dept table with nested collection as below. Nested Table Collection:
create or replace
type courselist as table of varchar2(64) Table Using Nested Table Collection:
CREATE TABLE "FCSDWH_STG"."DEPT"
( "NAME" VARCHAR2(20 BYTE),
"DIRECTOR" VARCHAR2(20 BYTE),
"OFFICE" VARCHAR2(20 BYTE),
"COURSES" "FCSDWH_STG"."COURSELIST"
) Content Of Table:NameDirectorofficecoursesAccountingJames CharlesUNOFCSDWH_STG.COURSELIST('natural science','chemistry','Computer Science','Computer Science')
I am trying to select and print an element from nested table collection using below plsql block.
MY_COURSE VARCHAR2(64 CHAR);
BEGIN
SELECT courses INTO MY_COURSE FROM TABLE(SELECT COURSES FROM DEPT) where courses='chemistry';
DBMS_OUTPUT.PUT_LINE(MY_COURSE);
END; Error Message:
PL/SQL: ORA-00904: "COURSES": invalid identifier
I am looking for different cheap storage options to build test RAC setup for DB on Linux@Dell PowerEdge T100 .
View 1 Replies View RelatedRAC star crs failed
[root@tyan147 crsd]# /orahome/grid/bin/crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
cssd.log
2012-11-21 11:12:29.312: [ GPnP][3613030480]clsgpnpm_connect: [at clsgpnpm.c:1100] GIPC gipcretConnectionRefused (29) gipcConnect(ipc-ipc://GPNPD_tyan147)
2012-11-21 11:12:29.312: [ GPnP][3613030480]clsgpnpm_connect: [at clsgpnpm.c:1101] Result: (48) CLSGPNP_COMM_ERR. Failed to connect to call url "ipc://GPNPD_tyan147"
2012-11-21 11:12:29.312: [ GPnP][3613030480]clsgpnp_getProfileEx: [at clsgpnp.c:546] Result: (13) CLSGPNP_NO_DAEMON. Can't get GPnP service profile from local GPnP daemon
2012-11-21 11:12:29.313: [ default][3613030480]Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2012-11-21 11:12:29.313: [ CSSD][3613030480]clsgpnp_getProfile failed, rc(13)
[code]....
i want to install oracle real application cluster using shared file system and not using ASM. we are not creating LUN for our data to kept and SAN admin will give us NFS share where we will place the database.
View 5 Replies View Relatedwhen i'm creating ASM instance, i'm getting an error
Quote:ora-29701: unable to connect to cluster manager
for this there were some workaround given to start css.
i tried everything from /etc/init.d/init.cssd start/enable but nothing worked, then i tried with executing
localconfig delete
localconfig add====>it failed and recommended to go for reset option
when i executed localconfig reset i get this following error:
Quote:
[root@rac2 bin]# sh localconfig add
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
[code]....
This is the same case when i used reset option.
how to change the cluster interconnection from public to private.
View 6 Replies View RelatedIt appears that the Oracle RAC cluster does not recognize the 'dba' group membership assignment to a user, unless it is assigned as the user's primary group.This also only affects newly created users, older users do not have this issue.
This affects us in the following way:
We are unable to create new cluster resources with the SAPCTL tool with the <sid>adm user.
When we try to create a resource using sapctl as the <sid>adm user we receive the following error:
CRS-0259: Owner of the resource does not belong to the group. SAP ABAP VIP creation failed.
The description of this error is that the resource owner (<sid>adm) is not a member of the group defined by 'osdbagrp' (what the cluster expects group membership for os users to control cluster resources), in our case this group is 'dba'.This is despite the user definitely being a member of the group.
Resource creation workaround:We are able to get around the resource creation by creating the resources either as root user, or by assigning 'dba' as <sid>adm's primary group.However, although we are able to control the VIP cluster resource, we are unable to control the other SAP enqueue resources as we assume that they need to be created by a user with 'sapsys' as a primary group (i.e. the resources do not start or it appears that there is not even an attempt to start the resources as there are no SAP startup logs created).
We have attempted multiple variations of creating and controlling cluster resources: changing <sid>adm primary group, changing cluster resource permissions, with nothing working for us.
The bottom line is that we need to be able to create these sapctl resources with a <sid>adm user that has 'sapsys' as a primary group while also being a member of the 'dba' group.
RAC installation on vmware is failing with following errors. I followed below link for installation. URL..... Found the following errors:
[root@rac2 ~]# cd /crs/oracle/bin/
[root@rac2 bin]# ./vipca
PRKR-1062 : Failed to find configuration for node rac1
PRKR-1062 : Failed to find configuration for node rac1
[code]....
The "/crs/oracle/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.The "/crs/ oracle/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
[root@rac2 bin]# /crs/oracle/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200
[root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
[root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
Is there any setups required for creating a utl file using sql developer. If yes, what are the setups to be done.
View 1 Replies View RelatedI would like to pursue pl/sql developer as my carrier.So I would like to create a setup in the following manner in my windows 7(64 bit) laptop.Since I heard that,In real time the setup will be look like as follows
Windows7 as front end
Toad --> to practice Pl/Sql(Preferred use in windows7)
Solaris OS (To install Oracle 10g in Solaris & practice scripting)
Virtual Box (Open source tool to run both windows and solaris)
How I can create setup so that I can accomplish following things(To gain knowledge in programming/scripting).
1.Both OS has to be run simultaneously with Virtual Box So that
Oracle will be running in backend(Solaris)
2.Practicing Oracle Pl/sql in Toad (Windows7)
3.Practicing shell scripting in Solaris.
Is it possible to create the setup as i mentioned above.
I have one table called posh, which has about 50,000 ids (millions of rows) so far. It is currently at about 50 gb. So each series of rows for a particular id is about 1 mb.
CREATE CLUSTER posh_cluster (id int)
SIZE 2M
STORAGE (initial 2000K next 2000K)
PARALLEL 4;
CREATE INDEX posh_cluster_index ON CLUSTER posh_cluster;
[code].......
According to the Oracle documentation size is "the average cluster key size", I am not really sure what that means. Is this the 1mb in posh table space I am using for each series of rows for an id, or the space used for the index? Secondly, the storage parameter for 'CREATE CLUSTER' should be what?
I am getting starting with rac environments. I need to configure a two nodes active/active with rac and I need to know if always using rac both nodes will be active or if I have to do that at some point when installing. I have reading some docs from oracle and others authors about rac and its configuration process but that is not understood for my yet.
View 5 Replies View Relatedhere we have san server and rac database two node database.i want to know how can i create directory on rac database. i know how to create directory on single database but i do not know how can i create directory on rac database.
View 3 Replies View Related