I am configuring two node RAC on oracle virtual box. Did its mandatory to configure DNS on both nodes before Rac installation? Whats the purpose of DNS in RAC. And if its mandatory did i have to configure DNS on each node separately?
View 1 RepliesWe are in the design phase of a project and wanting to implement a 4 node RAC with a DR site. However to get around some licensing costs, management are insisting that only 1 node be up accepting data at the DR site. In the event of a disaster, the remaining nodes will be switched on.
View 3 Replies View RelatedI am trying to create a rac setup on oracle 10.2. through NFS cluster configuration .i succeeded with the installtion of cluster configuarion and installation of oracle software ,but when i am trying to create database ,
View 2 Replies View RelatedHow to find out which node is master node in oracle 9i RAC database.
View 7 Replies View RelatedThe installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh
WARNING: directory '/home/oracle/product' is not owned by root
WARNING: directory 'home/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
the ./cluvy shows the cluster is valid.
While installing 11g oracle grid cluster software. I am getting below error.
[INS-40724] No locally defined network interface matches the SCAN VIP subnet.
i have given scan name as scan-cluster.invent
host-name virtual ip name
rac3 rac3-vip
rac5 rac5-vip
I am able to ping rac3 and rac5 from both nodes.
MY /etc/host file look like this.
192.168.2.133 rac3.invent.com rac3
192.168.2.132 rac3-priv.invent.com rac3-priv
192.168.122.1 rac3-vip.invent.com rac3-vip
192.168.2.136 rac5.invent.com rac5
[code]...
ssh connectivity everything works fine.
We have oracle database 10g(10.2.0.4) running on AIX 5.1. we have installed 2-node RAC on another server AIX 6.1 . Now we want to migrate our single node database to new 2-node rac environment. how we can move/migrate/cluster-aware our single node database to 2-node rac?
View 3 Replies View Related I would like get more details about single node RAC.. What is single Node RAC?..
1). just configure only one server instead of two node... same RAC installation.. cluster installation and shared disk configuration in single server itself.. in future we can add node to this ...
2). in 11gR2 having new feature Single Node RAC.. Multiple instances running on same node and configure using Cluster...
is there any advantage using single node rac(other than online upgrade to full RAC).
I have two node RAC database running on linux machine (Oracle10G SE), our requirnment is to install new oracle binaries for Oracle10G EE on diffrent home location.after install Oracle10G EE binaries on new oracle home , i want to point our existing database to new Oracle10G EE home to adotp a features of Oracle10G EE features.
But at the same time i dont want to deinstall our Oracle10G SE binaries.So it is possible to rollback our process to point our database back to Oracle10G SE from Oracle10G EE in case anything going wrong.
We have to configure Dataguard for our 24x7 critical banking 2 Node RAC database(10.2.0.4). Before proceeding with the configuration we have to make sure what steps we should follow to have minimum or no downtime.
1) Document covering DG setup in RAC environment.
2) We have to perform switchover as well so need its steps too. Either the normal switchover steps would be used or have to stop/start rac services as well.
How to get a RAC running in an EC2 environment?
It isn't possible to use one EC2 machine for each RAC node because EC2 can't handle the virtual IPs, but I had thought that I could use one EC2 machine to host several Linux VMs using Virtual Box (the same way that I use Virtual Box on a Windows host). But I can't get Virtual Box working on EC2. The only relevant advice I can find on this is comments to the effect that running any virtualization product with a Xen machine as host is not a good idea.
I do realize that this isn't a 100% Oracle question, but if set up a RAC on an Amazon Cloud machine,
I get following error when i'm configuring ASM.
I'm using Enterprise Linux and Oracle 11.1.0.6.0
[U]Note:[/U]
[root@RAC1 ~]# rpm -qa|grep asm
oracleasm-2.6.9-78.0.0.0.1.EL-2.0.3-2
oracleasm-support-2.0.3-2
only these two packages in my server. should i have to install oracleasmlib??
[root@RAC1 ~]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM librarydriver. The following questions will determine whether the driver isloaded on boot and what permissions it will have. The current valueswill be shown in brackets ('[]'). Hitting <ENTER> without typing an answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
[B]Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED][/B]
I don't have this package in my installation cd, when i searched in the web i could not find
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
[code]..
I have 2 node 11gR1 running on Unix, I want to add 3 more RAC node to it. What are all the steps involved and should I first add 3rd node and then the 4th node or I should add both at the same time? is there any difference between these two methods?
View 1 Replies View RelatedI need to change Virtual IP for one of my RAC node as it is conflicting with another server's IP.
View 1 Replies View RelatedI am having an issue when trying to run a backup from node 207...Initially When trying to run the backup I got this error.
scrbdefrmr207:orarer 54> brbackup -u / -c force -t online -m all -p initRER_online.sap
BR0051I BRBACKUP 7.00 (40)
BR0055I Start of database backup: begnlswy.anf 2011-08-11 21.29.08
BR0484I BRBACKUP log file: /oracle/RER/sapbackup/begnlswy.anf
BR0477I Oracle pfile /oracle/RER/102_64/dbs/initRER001.ora created from spfile /oracle/RER/102_64/dbs/spfileRER001.ora
BR0280I BRBACKUP time stamp: 2011-08-11 21.29.13
BR1351I Configuration of database services:
RER001 PREF: RER001 AVAIL:
RER002 PREF: RER002 AVAIL:
DVEBMGS50_scrbdefrmr207 PREF: RER001 AVAIL: RER002
DVEBMGS50_scrbdefrmr208 PREF: RER002 AVAIL: RER001
[code]....
I have many other rac servers and sids setup this way and they all work,,I can login to sqlplus and do any changes .. no issues going into sqlplus in node 207 and node 208..I have checked the directory i.e mesg and teh files are there ..
scrbdefrmr207:orarer 56> pwd
/oracle/RER/102_64/sqlplus/mesg
scrbdefrmr207:orarer 57> ls
cpyus.msb cpyus.msg sp1us.msb sp1us.msg sp2us.msb sp2us.msg
I think the message is decieving as it complains about oracle home and sp1<lang>.msb not found ,, when i tis there.I have also checked my env variables .. they all there i.e
scrbdefrmr207:orarer 58> env |grep ORA
dbms_type=ORA
ORACLE_SID=RER001
ORACLE_HOME=/oracle/RER/102_64
ORACLE_BASE=/oracle
scrbdefrmr207:orarer 59> env | grep LD_
LD_LIBRARY_PATH=/usr/sap/RER/SYS/exe/run:/oracle/RER/102_64/lib
I an run archives log backups perfectly.. So its only when its trying to connect into the db.
In case of RAC the node which is up first is master node.
In case of 4 nodes RAC master node itself is down then how to identify which node is master node out of serving nodes
I have 2 node 11gR2 RAC running on AIX 6.1, after I shutdown the database and restart crs using crsctl start crs, ASM instance comes back up but not the database and I had to start the database using srvctl, isn't that the database should come up when I start the crs?
View 4 Replies View RelatedWhat could be the reason for Such Errors.?OCR Integrity was Successful on one node and on the cloned node it was failed.
View 8 Replies View RelatedI have a production database with 2 node Physical RAC ENV on two separate machines , and we are going to enable audit trail parameter to DB values to capture all failed login attempts on a database.
we have done this on our testing ENV but dont know the procedure to deploy this steps on 2 node RAC ENV . I have done the below steps on our standalone testing ENV
1.Log in as SYS and connect with the SYSDBA privilege.
oUser Name: SYS
oPassword: Enter your password.
oConnect As: SYSDBA
2.To enable audit on DB use below command
SQL>alter system set audit_trail=DB scope=SPFILE;
3.Then restart the database.
4.After successful startup use the below command to capture log
SQL> audit create session whenever not successful;
steps to enable audit_trail to capture failed login attempts on two node RAC ENV.
Can a server (node) have more than one databases in RAC environment?
View 2 Replies View Relatedhere we have san server and rac database two node database.i want to know how can i create directory on rac database. i know how to create directory on single database but i do not know how can i create directory on rac database.
View 3 Replies View Relatedi am configuring asm on clusterware when i create instance on node1 and node 2 a message screen appear " Cant start asm instance on node 2)When i start asm instance manually on node 2 i found the below error in alert log file.
ORA-27508 IPC error sending a message
ORA-27300 OS system dependent operation:send msg failed with status: 101
ORA-27301 OS failure message: Network is unreachable
ORA-27302 failure occurred at: sskgxpsnd1
during installtion of Oracle RAC 11g r1 on Linux using VMware server, all the pre cluster installation was successful, and root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
View 5 Replies View RelatedI have installed Oracle 10g RAC crs and asm on CentOS release 5.4. When I am rebooting the nodes and starting crs manually All the services on both nodes starting successfully.
---------------------------------------------------------
[oracle@rac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
[code].....
But After a Few time/min few services goes down automatically and its show something like
---------------------------------------------------------
[root@rac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE UNKNOWN rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
[code].....
I have few doubts in rac environment
1.In 2 node rac while adding datafile to tablespace if you forget to mention '+'then what will happen whether it is going to be create or it throws an error if it creates where exactly located and other node users how to work on that tablespace .what all steps to perform that datafile is useful for all node users.
2. In Rac environment how to check how many sessions connected to particular node.
3)In Rac any node is evicted due to network failure then after we rebuild the network .Is there any steps to do manually to access the failure node after rebuilding the network or it will automatically available in cluster group which service is perform this activity.
4.While configuring cluster ware you choose voting disk and ocr disk location and which redundancy you will choose suppose if you go for normal redundancy how many disks you can select for each file either one or two?
I have implemented Rac One node with two machine(dbtest01,dbtest02) in 11.2.0.3 Redhat 5.3 one for online another one for offline. i have created TAF also.
dbtest01 is online and create one query
DECLARE
i number(36):=1;
begin
while(i<10000000)
loop
dbms_output.put_line(i);
i:=i+1;
end loop;
end;
i executed above query for test and i made relocate database using srvctl utility to dbtest02 machine.
session is relocated successfully with new session id...above query getting stop in 25000 itself. i want to make it continue that process..also i tried to find Omotion utility in all the path.. couldn't find it... where will it be.. i want to relocate all the session without losing work.
from application i am getting disconnect after relocation.. application server need to restart to get work again...
We have 5 node RAC database. I want to user 2 node for OLTP and 3 for DSS system. Guide now to create service for the requirement.
View 10 Replies View Relatedwe encounter a problem with a 2-nodes RAC with 11gR2 SE : Database RAC is correctly running but we encounter problems using RAC TNS entry, obtaining the message ORA-01033.We can access to the DB using a TNS entry using each one of IP addresses but when we use the SCAN address, it fails. 2 weeks ago RAC2 node could connect perfectly with the SCAN address but RAC1 (used as a client) obtained error message almost 30% of tries.
We made a reboot of RAC1 node and now SCAN address works correctly from RAC1 and RAC2 (used as a client) fails systematically with SCAN address but works perfectly with direct access to the database.On both nodes, SCAN address is perfectly resolved by DNS server, cluster seems correct, listeners seems correct...We have opened an SR on Metalink 4 weeks ago but we don't progress.
I have the following problem on a 10.2.0.4 Oracle on AIX 1.6...
I have 2 RAC nodes as the node # 2 goes down, the VIP migrated correctly to the node # 1, but the listener # 1 do not see the change, and just resolve to the local ip.
The same does not apply in the reverse case, when it drops the node N 1, the listener attends to the fallen VIP node and migrated.The configuration is correct and identical in both nodes, according to the documentation, but I can not find a reasonable answer.
IP node # 1.
scm1or01 192.68.60.11
scm1or01-VIP 192.68.60.13
IP node # 2
scm1or02 192.168.60.12
scm1or01-VIP 192.168.60.14
Below I write as I detect the problem: when scm1or02 is down:
scm1or01:/cots/oracle/app/oracle/product/10.2.0/db_1/network/admin> lsnrctl status
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production on 11-APR-2012 19:56:46
Copyright © 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
[code]...
Also the listener.ora in scm1or01 starts how LISTENER, but the crsstat says:
scm1or01:/cots/oracle/app/oracle/product/10.2.0/db_1/network/admin>crsstat listener_scm1oro1 ONLINE
I do not understand the reason, I've rebuilt the configuration of the listener, and netmgr netca tools, but the problem persists.