I have 2 node 11gR2 RAC running on AIX 6.1, after I shutdown the database and restart crs using crsctl start crs, ASM instance comes back up but not the database and I had to start the database using srvctl, isn't that the database should come up when I start the crs?
View 4 Repliesduring installtion of Oracle RAC 11g r1 on Linux using VMware server, all the pre cluster installation was successful, and root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
View 5 Replies View Relatedwhen running the root.sh on second node the following error occured
adding daemons to inittab
expecting the crs daemons to be up within 600 seconds
failure at final check of oracle CRS stack. 10.
We have oracle database 10g(10.2.0.4) running on AIX 5.1. we have installed 2-node RAC on another server AIX 6.1 . Now we want to migrate our single node database to new 2-node rac environment. how we can move/migrate/cluster-aware our single node database to 2-node rac?
View 3 Replies View Related I would like get more details about single node RAC.. What is single Node RAC?..
1). just configure only one server instead of two node... same RAC installation.. cluster installation and shared disk configuration in single server itself.. in future we can add node to this ...
2). in 11gR2 having new feature Single Node RAC.. Multiple instances running on same node and configure using Cluster...
is there any advantage using single node rac(other than online upgrade to full RAC).
I have 2 node 11gR1 running on Unix, I want to add 3 more RAC node to it. What are all the steps involved and should I first add 3rd node and then the 4th node or I should add both at the same time? is there any difference between these two methods?
View 1 Replies View RelatedCan i setup 2 node oracle RAC using vmware server in a single laptop..? cpu-intel i3 memory 4GB.
View 1 Replies View RelatedI need to change Virtual IP for one of my RAC node as it is conflicting with another server's IP.
View 1 Replies View RelatedI am having an issue when trying to run a backup from node 207...Initially When trying to run the backup I got this error.
scrbdefrmr207:orarer 54> brbackup -u / -c force -t online -m all -p initRER_online.sap
BR0051I BRBACKUP 7.00 (40)
BR0055I Start of database backup: begnlswy.anf 2011-08-11 21.29.08
BR0484I BRBACKUP log file: /oracle/RER/sapbackup/begnlswy.anf
BR0477I Oracle pfile /oracle/RER/102_64/dbs/initRER001.ora created from spfile /oracle/RER/102_64/dbs/spfileRER001.ora
BR0280I BRBACKUP time stamp: 2011-08-11 21.29.13
BR1351I Configuration of database services:
RER001 PREF: RER001 AVAIL:
RER002 PREF: RER002 AVAIL:
DVEBMGS50_scrbdefrmr207 PREF: RER001 AVAIL: RER002
DVEBMGS50_scrbdefrmr208 PREF: RER002 AVAIL: RER001
[code]....
I have many other rac servers and sids setup this way and they all work,,I can login to sqlplus and do any changes .. no issues going into sqlplus in node 207 and node 208..I have checked the directory i.e mesg and teh files are there ..
scrbdefrmr207:orarer 56> pwd
/oracle/RER/102_64/sqlplus/mesg
scrbdefrmr207:orarer 57> ls
cpyus.msb cpyus.msg sp1us.msb sp1us.msg sp2us.msb sp2us.msg
I think the message is decieving as it complains about oracle home and sp1<lang>.msb not found ,, when i tis there.I have also checked my env variables .. they all there i.e
scrbdefrmr207:orarer 58> env |grep ORA
dbms_type=ORA
ORACLE_SID=RER001
ORACLE_HOME=/oracle/RER/102_64
ORACLE_BASE=/oracle
scrbdefrmr207:orarer 59> env | grep LD_
LD_LIBRARY_PATH=/usr/sap/RER/SYS/exe/run:/oracle/RER/102_64/lib
I an run archives log backups perfectly.. So its only when its trying to connect into the db.
We have 2 node cluster with 10.2.0.4 home and 11.2.0.2 home under 11gr2 grid infrastructure with ASM in LINUX environment. We are planning to add 3rd node to this cluster. Is there any issues to add 3rd node to existing environment or running fine.
View 2 Replies View RelatedI am trying to install ORACLE 11gR2 RAC on CentOS 5.5 .
when run root.sh on first node. I am gettign 2/3 failed command lines but the end went successful
=======================================================================
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-5.el5.centos
...
add nodeapps -n perflabhp03 -A perflabhp03-vip/255.255.254.0/eth0 on node=perflabhp03 ... failed
...
PRCR-1001 : Resource ora.net1.network does not exist
add scan=perflab-cluster-scan ... failed,
Configure Oracle Grid Infrastructure for a Cluster ... failed
...
'UpdateNodeList' was successful.
=========================================================================
Because of this output, when see the ./crsctl stat res -t , it showing LISTENER offline for perflahp03, and I can not see any status line for "perflabhp03-vip " and "Scan-listener".
Do I need to reinstall the entire cluster setup because of VIP issue?
I need to setup Oracle 11gR2 single node @ Linux RHat 5 64-bit for long performance tests, huge loads, high speeds, a lot of transactions, having a good scalability, etc.
It's not a production server, but for strong system/volume tests.
CPU
Motherboard
Memory
HDD
Network
Is there any document available for 10g to 11gR2 RAC upgrade on AIX?
View 1 Replies View Relatedup gradation steps from 10g RAC to 11gr2 RAC.
View 1 Replies View RelatedHow to find out which node is master node in oracle 9i RAC database.
View 7 Replies View RelatedIn case of RAC the node which is up first is master node.
In case of 4 nodes RAC master node itself is down then how to identify which node is master node out of serving nodes
I'm trying to install Oracle 11gR2 RAC on AIX, do we need to turn on Multicasting, can we install without multicasting? Also can I have the ASM disk with external redundancy for OCR and Voting Disk?
View 3 Replies View RelatedI am installing 11gr2 11.2.0.2 grid infrastructure software. while running root.sh on node1 it got failed.
Start of resource "ora.crsd" failed
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-5017: The resource action "ora.crsd start" encountered the following error:
Start action for daemon aborted
CRS-2674: Start of 'ora.crsd' on 'rac1' failed
CRS-2679: Attempting to clean 'ora.crsd' on 'rac1'
CRS-2681: Clean of 'ora.crsd' on 'rac1' succeeded
CRS-4000: Command Start failed, or completed with errors.
Clusterware exclusive mode start of Clusterware Ready Services failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6475.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
Any experience before on Oracle 11gr2 RAC to RAC via EMC SRDF setup?
View 5 Replies View RelatedWe have an Oracle 9i (9.2.0.7) two-node RAC database running on Solaris 5.8. Recently we have switched our production database from no archive log mode to archive log. We changed the parameter CLUSTER_DATABASE=FALSE on one of the instances before converting and reverted back.why this parameter needs to be changed to false?
View 2 Replies View RelatedWhat could be the reason for Such Errors.?OCR Integrity was Successful on one node and on the cloned node it was failed.
View 8 Replies View RelatedI have a production database with 2 node Physical RAC ENV on two separate machines , and we are going to enable audit trail parameter to DB values to capture all failed login attempts on a database.
we have done this on our testing ENV but dont know the procedure to deploy this steps on 2 node RAC ENV . I have done the below steps on our standalone testing ENV
1.Log in as SYS and connect with the SYSDBA privilege.
oUser Name: SYS
oPassword: Enter your password.
oConnect As: SYSDBA
2.To enable audit on DB use below command
SQL>alter system set audit_trail=DB scope=SPFILE;
3.Then restart the database.
4.After successful startup use the below command to capture log
SQL> audit create session whenever not successful;
steps to enable audit_trail to capture failed login attempts on two node RAC ENV.
Can a server (node) have more than one databases in RAC environment?
View 2 Replies View Relatedhere we have san server and rac database two node database.i want to know how can i create directory on rac database. i know how to create directory on single database but i do not know how can i create directory on rac database.
View 3 Replies View Relatedi am configuring asm on clusterware when i create instance on node1 and node 2 a message screen appear " Cant start asm instance on node 2)When i start asm instance manually on node 2 i found the below error in alert log file.
ORA-27508 IPC error sending a message
ORA-27300 OS system dependent operation:send msg failed with status: 101
ORA-27301 OS failure message: Network is unreachable
ORA-27302 failure occurred at: sskgxpsnd1
I have installed Oracle 10g RAC crs and asm on CentOS release 5.4. When I am rebooting the nodes and starting crs manually All the services on both nodes starting successfully.
---------------------------------------------------------
[oracle@rac1 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
[code].....
But After a Few time/min few services goes down automatically and its show something like
---------------------------------------------------------
[root@rac1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE UNKNOWN rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
[code].....
I have few doubts in rac environment
1.In 2 node rac while adding datafile to tablespace if you forget to mention '+'then what will happen whether it is going to be create or it throws an error if it creates where exactly located and other node users how to work on that tablespace .what all steps to perform that datafile is useful for all node users.
2. In Rac environment how to check how many sessions connected to particular node.
3)In Rac any node is evicted due to network failure then after we rebuild the network .Is there any steps to do manually to access the failure node after rebuilding the network or it will automatically available in cluster group which service is perform this activity.
4.While configuring cluster ware you choose voting disk and ocr disk location and which redundancy you will choose suppose if you go for normal redundancy how many disks you can select for each file either one or two?
I have implemented Rac One node with two machine(dbtest01,dbtest02) in 11.2.0.3 Redhat 5.3 one for online another one for offline. i have created TAF also.
dbtest01 is online and create one query
DECLARE
i number(36):=1;
begin
while(i<10000000)
loop
dbms_output.put_line(i);
i:=i+1;
end loop;
end;
i executed above query for test and i made relocate database using srvctl utility to dbtest02 machine.
session is relocated successfully with new session id...above query getting stop in 25000 itself. i want to make it continue that process..also i tried to find Omotion utility in all the path.. couldn't find it... where will it be.. i want to relocate all the session without losing work.
from application i am getting disconnect after relocation.. application server need to restart to get work again...
We have 5 node RAC database. I want to user 2 node for OLTP and 3 for DSS system. Guide now to create service for the requirement.
View 10 Replies View Relatedwe encounter a problem with a 2-nodes RAC with 11gR2 SE : Database RAC is correctly running but we encounter problems using RAC TNS entry, obtaining the message ORA-01033.We can access to the DB using a TNS entry using each one of IP addresses but when we use the SCAN address, it fails. 2 weeks ago RAC2 node could connect perfectly with the SCAN address but RAC1 (used as a client) obtained error message almost 30% of tries.
We made a reboot of RAC1 node and now SCAN address works correctly from RAC1 and RAC2 (used as a client) fails systematically with SCAN address but works perfectly with direct access to the database.On both nodes, SCAN address is perfectly resolved by DNS server, cluster seems correct, listeners seems correct...We have opened an SR on Metalink 4 weeks ago but we don't progress.