I'm trying to install Oracle 11gR2 RAC on AIX, do we need to turn on Multicasting, can we install without multicasting? Also can I have the ASM disk with external redundancy for OCR and Voting Disk?
View 3 RepliesAny experience before on Oracle 11gr2 RAC to RAC via EMC SRDF setup?
View 5 Replies View RelatedYesterday I was installing 11.2.0.2 patch to our Oracle 11gR2(11.2.0.1.0) Two node RAC cluster on OEL 5.4 x86 Linux.Before installing I have read [URL] support note which says "Note: All Oracle Grid Infrastructure patch set upgrades must be out-of-place upgrades, in which you install the patch set into a new Grid home. In-place patch set upgrades are not supported. "
During Installation I found following Installation Option :
1) Install and configure Oracle grid Infrastructure for a cluster
2) Configure Oracle Grid Infrastructure for a Standalone Server
3) Upgrade Oracle Grid Infrastructure or Oracle Automatic Storage Management
4) Install Oracle Grid Infrastructure Software Only
Which option should I have to choose here ?
I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
I tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.
[URL]
Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.
Quote:filename = /tmp/.GsdDisplayed
INFO: Query Returned: false
INFO: Calling Action fileActions10.2.0.6.0 appendStringToFile
source = /u01/app/11.2.0/grid/install/cluster.ini
stringToAppend = [cluster_info]
cluster_name=rac-scan
[code]....
Is there any document available for 10g to 11gR2 RAC upgrade on AIX?
View 1 Replies View Relatedup gradation steps from 10g RAC to 11gr2 RAC.
View 1 Replies View RelatedI am installing 11gr2 11.2.0.2 grid infrastructure software. while running root.sh on node1 it got failed.
Start of resource "ora.crsd" failed
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-5017: The resource action "ora.crsd start" encountered the following error:
Start action for daemon aborted
CRS-2674: Start of 'ora.crsd' on 'rac1' failed
CRS-2679: Attempting to clean 'ora.crsd' on 'rac1'
CRS-2681: Clean of 'ora.crsd' on 'rac1' succeeded
CRS-4000: Command Start failed, or completed with errors.
Clusterware exclusive mode start of Clusterware Ready Services failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6475.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
I have 2 node 11gR2 RAC running on AIX 6.1, after I shutdown the database and restart crs using crsctl start crs, ASM instance comes back up but not the database and I had to start the database using srvctl, isn't that the database should come up when I start the crs?
View 4 Replies View RelatedI have a database running on 10205 version. It is a RAC database with ASM storage.
I want to migrate this database to other server and upgrade this database to 11202 version .
I am using Oracle 9i and Unix on my system and trying to execute a UNIX shell command through external procedure in C.I created a shared lib (libextproc.so) for the following function.
int sysrun(char *command)
{
return system(command);
}
This function runs fine when caled through a driver function in C, meaning that the shared lib is fine.In PL/SQL, I have used the following method to invoke a UNIX command:-
create or replace library shell_lib as '/home/ECETRAonsite/oracle/OraHome1/lib/libextproc.so';
/
create or replace function sysrun (syscomm in varchar2)
return binary_integer
as language C
name "sysrun"
library shell_lib
parameters(syscomm string);
/
Now when I call this PL/SQL function to invoke the command, it is run succesfully but does not create the file.
SQL>
1 declare
2 rc number;
3 begin
4 rc := sysrun('/bin/touch /home/ECETRAonsite/oracle/OraHome1/test/sach');
5 dbms_output.put_line('Return Code='||rc);
6* end;
SQL> /
Return Code=0
PL/SQL procedure successfully completed.I have verified that the path for 'touch' is correct.Following are my configuration files.
listener.ora
-------------
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
[code]...
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
View 2 Replies View RelatedIam planning to upgrade my Oracle Database from 10G to 11G .
Its on HP Unix Environment 11.23 and
Oracle CRS 10.2.0.4
Oracle ASM 10.2.0.4
Oracle RDBMS 10.2.0.4
Its in RAC env...and Active-Active DB running controlled by tnsnames.ora .
I have a UNIX shell script as following,
#runs the selected process
${ORACLE_HOME}/bin/sqlplus -s ${USER_PASS} >${TMP_FILE} <<EOF
set pause off
set verify off
set pagesize 0
set linesize 2000
set timing off
[code].........
I am passing a Date to the Oracle Procedure in `date +'%b_%d-%H:%M:%S'` format.
rmsqa813.2 /home/ashlaksh> echo `date +'%b_%d-%H:%M:%S'`
Jun_14-02:26:37
The oracle Procedure's SQL is as following,
SELECT ffdh.fiscal_doc_id INVOICE_ID,
ffdh.location_id LOCATION_ID
FROM fm_fiscal_doc_header ffdh,
fm_schedule fs
[code]........
The above SQL is not getting the data as the Date format "AND ffdh.last_update_datetime <=i_last_update_datetime " is not matching..
Do I need to convert the Date ? ( But i_last_update_datetime is DATE)
I'm on Oracle 11g R1. I've a requirement where user will be putting CSV files on Unix server and I've to create a job which runs periodically to check if any new file is added by user in the folder. If it finds a new file (s), then it needs to identify it and insert its name in an Oracle table. Once file's name is noted, it has to move file from that directory to another one.
View 2 Replies View RelatedI installed a printer(HP Laserjet 3390) in UNIX(Solaris).Followed the instructions while installing as to the path it should be present for Reports to read it etc.,Also modified the uiprint.txt file with the desired .hpd file.Logging on to the UNIX machine, I am using the below command
rwrun.sh report=xyz.rdf userid=XXXX/XXX@xxx paramform=no p_orig_org='0825' desformat=pdf destype=printer desname=xxxx batch=yes
This command invokes the printer and
^[%12345X@PJL
@PJL SET RESOLUTION=300
@PJL SET PAGEPROTECT=OFF
@PJL SET ENTER LANGUAGE=PCL
^[%1A^[E^
@PJL RESET
^[%12345X
is what it prints.Realizing that this is because of the missing parameter,tried to change paramform=yes but I am not sure how to pass the parameter.
my problem is this. I created the java classes using itext to create a document library. Rtf, or. Odt. I integrated classes in Oralce form and everything works. I created a file. Odt application server on a folder and now only remains for me to open the file. The roads are two:
1. Directly from the server, you can?
2. From the client using the API or openoffice launching the executable with cmd?
Oracle Forms is a command to transfer files on the client and run the executable swriter of openoffice?
We have recently migrated from IAS 9.0 to IAS 10.1.2 in one of our development Server hosted in UNIX B.11.11. We are using Oracle forms as front end. We have re-compiled all the existing forms and libraries using IAS 10. There were no changes in the forms and libraries. We deployed the forms in our development box and configured it, since we are using our own environment specific copy of default.env file. With few of forms we are facing the FRM-92100 error mentioning the "Connection to Server was interrupted". Most of the forms are running fine but with few forms we are facing this error. Some of details are:-
Oracle 10.1.0.4
UNIX B.11.11
IAS 10.1.2
NLS_LANG parameter in default.env is set to "american_america.WE8ISO8859P1"..We have even tried copying the libraries in our local system and then opening and saving them and ftp'ng them back in to UNIX server and then recompiling there with full permissions but still unable to resolve this error.
i need a connectivity code to connect oracle DB in UNIX.pls send me a code exactly.
View 2 Replies View RelatedI would like to ask you if you know which built-in can I use for transferring a excel file from our Unix box to a table in oracle database, right now we are using webutil_file_transfer.Client_To_DB_with_progress using forms developer, but I need to run as an automatic process uploading form unix into oracle directly without using forms.
View 22 Replies View RelatedI have a file which is placed on a certain location on unix server. I want to write a code which picks up that file and emails it to certain recipients.
View 3 Replies View RelatedI want to insert STAT and ENDTIME values for each job in joblist into TBL_DAILY_STATUS table.
E.g. : insert into tbl_daily_status values(STAT,ENDTIME);
#!/bin/ksh
joblist="com_abc_job com_abc_dot_job com_abc_seq com_abc_det"
for i in $joblist
do
STAT=`./JobStatus.pl -i NP1 -z Z8PIMBN -p $i|awk '{print $6}'`
ENDTIME=`./JobStatus.pl -i NP1 -z Z8PIMBN -p $i|awk '{print $4" " $5}'`
echo "$STAT"
echo "$ENDTIME"
done
I am trying to Push the data from Oracle which is running in HP-UNIX to SQL Server. But don't know the efficient way to connect the SQL server from oracle which is running on HP-UNIX.I have heard about oracle Heterogeneous Connectivity but don't know exactly how to implement it in Unix environment.
View 1 Replies View RelatedWe have an application that fetches and writes data into oracle database through pro c. oracle datyabase is on another server.
We are storing some secure information into oracle database so we want to encrypt the data sent by our aplication into oracle database.We do not want to use SSL(i.e certificates) and also do not want to make use of Advance Security Option available in oracle and also do not want to make any changes in sqlnet.ora file on server side.
achieve encryption of traffic between our application and Oracle database?
How to overcome the prompt user id & password to connect oracle DB from Unix environment.
View 2 Replies View RelatedHow to connect to database with windows authentication:
OS system: 2008 R2 windows
oracle : 11.2.0.3
sqlnet.ora set to NTS.
also user is created on database externally "domain/username"
i want to connect to the database with my windows account!
here is the error faced when installing oracle 11gR2,
ERROR:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/.colorls9rT/OraInstall2013-09-12_03-59-57PM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
[code]...
Im planning to upgrade oracle10g to 11gr2.. i have query on that ..
my 10g having ORACLE_HOME=/app/ora/10.2.0, orainventory =/app/ora/oraInventory
new 11g ORACLE_HOME=/app/ora/11.2.0 .orainventory =?
my question is where i need to set ora inventory location for my new 11g? or it will create new location for that?
OS version : IBM AIX
I have Windows server working Oracle 8.0.5.I have to migrate to another server that is Oracle 11gR2 on Windows 2008.Some say I can't do Export and Import directly.And some say DBlink is not working from 11Gr2 to 8.
What can be fewest step to migrate?Somebody try to use 'Oracle directory' and VB and Powerbuilder program to send data and DDL from 8 to 11Gr2.
migrating from Oracle 8.0.5 to 11Gr2 machine.
I am building a database to store call quality statistics for VOIP networks. It is a very insert heavy application, and data reliability is of relatively minimal importance (in the sense that a few corrupt call records here and there doesn't matter the way corruption does in for example a banks database). Long term storage is also unimportant, most customers only wish to keep 3 months of data readily available in the database. Most do not even archive the older data.
To that end I am searching for every possible way to improve my insert performance and the internet has turned me onto the idea of NOLOGGING. These are the steps I have taken to reduce my IO consumed by the Redo and Undo logs.
1. I am inserting with the APPEND_VALUES hint.
2. I have disabled force logging at the database level
3. I have disabled force logging at the tablespace level
4. I have disabled logging on the relevant table and each of its indices
As best I can tell this is all I can do to minimize Redo/Undo, but based on my observations of the Disk portion of the WinServer2008 Performance Monitor, this has made little to no change in the amount of IO to my REDO and UNDO files. IO to the .dbf containing my table makes up less than 20% of the total disk IO for oracle.exe, the rest is the REDO and UNDO logs.
asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:897564200346274711
The above article is a little over my head but I am able to extract from it that I will never entirely eliminate REDO/UNDO, which is fine, but I would think I could get it lower than it currently is.ted.