I have a file which is placed on a certain location on unix server. I want to write a code which picks up that file and emails it to certain recipients.
View 3 RepliesI am using Oracle 10.2.0.4, on redhat linux 5.1 and microsoft exchange 2003.
I have created below mentioned Procedure to send my email...I am able to send the mails successfully inside the premises (in same domain). But when i send them to another domain (Outside)..I get the error "SMTP permanent error: 503 5.5.2 Send hello first."
CREATE OR REPLACE PROCEDURE E_Mail(
p_to IN VARCHAR2,
p_from IN VARCHAR2,
p_subject IN VARCHAR2,
p_text IN VARCHAR2 DEFAULT NULL,
[code]...
For RAC with ASM, user can not browse the ASM files. From within NTFS or ext2( for linux) they are not seen. Similarly, for OCFS2 , are these oracle files not seen through ext2 , linux file system? Also, for RAC with ASM if I query v$datafile, it returns +diskgroup/dbname/datafile.dbf. What will be the file name returned for datafiles in OCFS2 by this view?
View 2 Replies View RelatedI have a requirement to read flat text file(around 15000 lines) residing at a client location from DB server and write into a table in One cell.
I tried UTL_FILE and DBMS_LOB but, i am not able to access client location to read the file as it reads path from Oracle Directory.
eg.
my client path is 198.168.1.1 and my DB server is in unix say 192.168.1.10.
file location is: \192.168.1.1shareabc.txt
So I created One Oracle directory as MY_DIR having DIRECTORY_PATH as '\192.168.1.1share'.
But both UTL_FILE and DBMS_LOB is not able to access the file.
Error Message:
-------------
Unable to process CLOB -22288 ~ ORA-22288: file or LOB operation FILEOPEN
failed
No such file or directory
Few Details for reference:
-------------------------
File Location: \192.168.1.1shareabc.txt
Unix DB Server location: 192.168.1.10
Table : Test (filename varchar2(30), Content CLOB)
Oracle Dir: MYDIR
Directory_Path: \192.168.1.1share
I have to pick a text file created in UNIX server directory and send it as an mail attachment.The problem here is, when the file size exceeding more than 10 MB. I think there is a way to zip a file in UNIX with some .gz extension or something like that.
how to zip a file in unix server using PL/SQL code. So that I will pick the zipped file and send it as an attachment.
I have text file with data in UNIX. I want to clear only records(make empty the file) using UTL_FILE..
I know we can remove the text file from UNIX and create file again with same name...
Is there any other way??
I'm running a sql file in Unix (using SQLPLUS command) and i want the file output to be sent to local windows directory. I specified the windows directory name in my Spool command (Spool C:/<Directory Name> ) , But it is not working
Our Unix server is a FTP server but i don't want to FTP the spool file from unix to Windows as the spool file is Huge and it takes hours for the transfer to complete (and we have to run the script multiple times).
Is there a way i can have the spool file created in Local windows directory when i run my sql script in Unix?
I need to develop a form which has to read and display the contents of a text file that is stored in the Unix system where the Oracle data base is installed. So basically its the database server and not the forms application server.
1. Create an external table for the file everytime when the form is loaded by dropping and re creating the table and base the data block in the form on that table and execute_query and display the contents.
2. I am confused whether to use webutil or utlfile packages to read from the file and display on the screen as the file resides in the database or Oracle server and not forms application server or client machine.
I am using Oracle 9i and Unix on my system and trying to execute a UNIX shell command through external procedure in C.I created a shared lib (libextproc.so) for the following function.
int sysrun(char *command)
{
return system(command);
}
This function runs fine when caled through a driver function in C, meaning that the shared lib is fine.In PL/SQL, I have used the following method to invoke a UNIX command:-
create or replace library shell_lib as '/home/ECETRAonsite/oracle/OraHome1/lib/libextproc.so';
/
create or replace function sysrun (syscomm in varchar2)
return binary_integer
as language C
name "sysrun"
library shell_lib
parameters(syscomm string);
/
Now when I call this PL/SQL function to invoke the command, it is run succesfully but does not create the file.
SQL>
1 declare
2 rc number;
3 begin
4 rc := sysrun('/bin/touch /home/ECETRAonsite/oracle/OraHome1/test/sach');
5 dbms_output.put_line('Return Code='||rc);
6* end;
SQL> /
Return Code=0
PL/SQL procedure successfully completed.I have verified that the path for 'touch' is correct.Following are my configuration files.
listener.ora
-------------
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
[code]...
I would like to develop a form which will be replica of windows explorer.It should be able to read all files or files from a specific folder from an unix platform.
if yes can i have a template. I do not want to start from the scratch since I do not have much time.
I have create one table emp under scott schema, and this schemas default tablespace is USERS and this tablespace has 3 datafiles.
Now how do I identify the object EMP is residing on which datafile in USERS tablespace?
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
View 2 Replies View RelatedIam planning to upgrade my Oracle Database from 10G to 11G .
Its on HP Unix Environment 11.23 and
Oracle CRS 10.2.0.4
Oracle ASM 10.2.0.4
Oracle RDBMS 10.2.0.4
Its in RAC env...and Active-Active DB running controlled by tnsnames.ora .
I'm trying to install Oracle 11gR2 RAC on AIX, do we need to turn on Multicasting, can we install without multicasting? Also can I have the ASM disk with external redundancy for OCR and Voting Disk?
View 3 Replies View RelatedI have a UNIX shell script as following,
#runs the selected process
${ORACLE_HOME}/bin/sqlplus -s ${USER_PASS} >${TMP_FILE} <<EOF
set pause off
set verify off
set pagesize 0
set linesize 2000
set timing off
[code].........
I am passing a Date to the Oracle Procedure in `date +'%b_%d-%H:%M:%S'` format.
rmsqa813.2 /home/ashlaksh> echo `date +'%b_%d-%H:%M:%S'`
Jun_14-02:26:37
The oracle Procedure's SQL is as following,
SELECT ffdh.fiscal_doc_id INVOICE_ID,
ffdh.location_id LOCATION_ID
FROM fm_fiscal_doc_header ffdh,
fm_schedule fs
[code]........
The above SQL is not getting the data as the Date format "AND ffdh.last_update_datetime <=i_last_update_datetime " is not matching..
Do I need to convert the Date ? ( But i_last_update_datetime is DATE)
I'm on Oracle 11g R1. I've a requirement where user will be putting CSV files on Unix server and I've to create a job which runs periodically to check if any new file is added by user in the folder. If it finds a new file (s), then it needs to identify it and insert its name in an Oracle table. Once file's name is noted, it has to move file from that directory to another one.
View 2 Replies View RelatedI installed a printer(HP Laserjet 3390) in UNIX(Solaris).Followed the instructions while installing as to the path it should be present for Reports to read it etc.,Also modified the uiprint.txt file with the desired .hpd file.Logging on to the UNIX machine, I am using the below command
rwrun.sh report=xyz.rdf userid=XXXX/XXX@xxx paramform=no p_orig_org='0825' desformat=pdf destype=printer desname=xxxx batch=yes
This command invokes the printer and
^[%12345X@PJL
@PJL SET RESOLUTION=300
@PJL SET PAGEPROTECT=OFF
@PJL SET ENTER LANGUAGE=PCL
^[%1A^[E^
@PJL RESET
^[%12345X
is what it prints.Realizing that this is because of the missing parameter,tried to change paramform=yes but I am not sure how to pass the parameter.
my problem is this. I created the java classes using itext to create a document library. Rtf, or. Odt. I integrated classes in Oralce form and everything works. I created a file. Odt application server on a folder and now only remains for me to open the file. The roads are two:
1. Directly from the server, you can?
2. From the client using the API or openoffice launching the executable with cmd?
Oracle Forms is a command to transfer files on the client and run the executable swriter of openoffice?
We have recently migrated from IAS 9.0 to IAS 10.1.2 in one of our development Server hosted in UNIX B.11.11. We are using Oracle forms as front end. We have re-compiled all the existing forms and libraries using IAS 10. There were no changes in the forms and libraries. We deployed the forms in our development box and configured it, since we are using our own environment specific copy of default.env file. With few of forms we are facing the FRM-92100 error mentioning the "Connection to Server was interrupted". Most of the forms are running fine but with few forms we are facing this error. Some of details are:-
Oracle 10.1.0.4
UNIX B.11.11
IAS 10.1.2
NLS_LANG parameter in default.env is set to "american_america.WE8ISO8859P1"..We have even tried copying the libraries in our local system and then opening and saving them and ftp'ng them back in to UNIX server and then recompiling there with full permissions but still unable to resolve this error.
i need a connectivity code to connect oracle DB in UNIX.pls send me a code exactly.
View 2 Replies View RelatedI would like to ask you if you know which built-in can I use for transferring a excel file from our Unix box to a table in oracle database, right now we are using webutil_file_transfer.Client_To_DB_with_progress using forms developer, but I need to run as an automatic process uploading form unix into oracle directly without using forms.
View 22 Replies View RelatedI want to insert STAT and ENDTIME values for each job in joblist into TBL_DAILY_STATUS table.
E.g. : insert into tbl_daily_status values(STAT,ENDTIME);
#!/bin/ksh
joblist="com_abc_job com_abc_dot_job com_abc_seq com_abc_det"
for i in $joblist
do
STAT=`./JobStatus.pl -i NP1 -z Z8PIMBN -p $i|awk '{print $6}'`
ENDTIME=`./JobStatus.pl -i NP1 -z Z8PIMBN -p $i|awk '{print $4" " $5}'`
echo "$STAT"
echo "$ENDTIME"
done
I am trying to Push the data from Oracle which is running in HP-UNIX to SQL Server. But don't know the efficient way to connect the SQL server from oracle which is running on HP-UNIX.I have heard about oracle Heterogeneous Connectivity but don't know exactly how to implement it in Unix environment.
View 1 Replies View RelatedWe have an application that fetches and writes data into oracle database through pro c. oracle datyabase is on another server.
We are storing some secure information into oracle database so we want to encrypt the data sent by our aplication into oracle database.We do not want to use SSL(i.e certificates) and also do not want to make use of Advance Security Option available in oracle and also do not want to make any changes in sqlnet.ora file on server side.
achieve encryption of traffic between our application and Oracle database?
How to overcome the prompt user id & password to connect oracle DB from Unix environment.
View 2 Replies View RelatedI have a requirement to read a file from windows m/c and write into Unix Server. How can i do that in Oracle forms.
I tried TEXT_IO package.But that is not allowing to access Unix path.
I have new virtual UNIX machine and I installed oracle client on /usr/lib/oracle. Also I have a oracle database and I am able to connect to this database from my desktop sql developer.
So now I am trying to connect from new UNIX machine. Where I created tnsnames.ora file under /usr/lib/oracle/network/admin and before connecting did export the following
export TNS_ADMIN=/usr/lib/oracle/network/admin
export ORACLE_HOME=/usr/lib/oracle/
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$HOME/bin:/sbin:$ORACLE_HOME/bin
export ORACLE_SID=VFIODSD1
when I try
# sqlplus
username :xxxxxxx
password : xxxxxxx
ORA-12545: Connect failed because target host or object does not exist. Not sure what I missed here. using same tns file I am able to connect from sql developer on windows.
Oracle10g to Sybase12.5 Migration:- How a Oracle dump file can be converted to any text file/xls file which will be loaded in sybase database later through BCP.
means
1.Exporting objects as dump file from Oracle.
2.Is there any tool/process available that can convert this into csv/txt/xls file.
3.This files can be loaded in sybase.
I want to pass a variable in unix to oracle exp command
I have a file with owner and password
I did
export user=$(head -$riga $file | tail -1)
echo $user
let riga+=1
export psw=$(head -$riga $file | tail -1)
echo $psw
exp $user/$psw file=exp_$current.dmp
but this doesn't work.
how to edit profile on unix [x86-32] during 1og oracle installation. edit /export/home/oracle/.profile
View 3 Replies View Related