Forms :: FRM-92100 Error In Oracle 10.1.0.4 Under UNIX B.11.11
Jul 30, 2010
We have recently migrated from IAS 9.0 to IAS 10.1.2 in one of our development Server hosted in UNIX B.11.11. We are using Oracle forms as front end. We have re-compiled all the existing forms and libraries using IAS 10. There were no changes in the forms and libraries. We deployed the forms in our development box and configured it, since we are using our own environment specific copy of default.env file. With few of forms we are facing the FRM-92100 error mentioning the "Connection to Server was interrupted". Most of the forms are running fine but with few forms we are facing this error. Some of details are:-
Oracle 10.1.0.4
UNIX B.11.11
IAS 10.1.2
NLS_LANG parameter in default.env is set to "american_america.WE8ISO8859P1"..We have even tried copying the libraries in our local system and then opening and saving them and ftp'ng them back in to UNIX server and then recompiling there with full permissions but still unable to resolve this error.
I have developed an application Customer Call Handling where the main form of the Application has about 42(Data & Control) Blocks, many canvases and windows.This main form Calls many other forms which all work fine. But whenever this Main form is Cleared,Queried it calls the Code gems_ proc_ clear which has CLEAR_FORM(NO_VALIDATE).Immediately after the Clear_form(no_validate) is fired it throws this error FRM-92100.
On Save too, the form needs to be cleared once data is saved. The save works fine. but when the call to gems_proc_clear is made after save it throws the error again.
Since its the main form of the application, The Call Center users are having difficulty Clearing or Querying the form.
The forms have been developed in Forms 6i Version and work absolutely fine in 6i Test-Server Environment. But the moment we run the Forms in the Live Server(Oracle 11G) Environment when the form is Cleared,Queried this error throws.
I installed a printer(HP Laserjet 3390) in UNIX(Solaris).Followed the instructions while installing as to the path it should be present for Reports to read it etc.,Also modified the uiprint.txt file with the desired .hpd file.Logging on to the UNIX machine, I am using the below command
rwrun.sh report=xyz.rdf userid=XXXX/XXX@xxx paramform=no p_orig_org='0825' desformat=pdf destype=printer desname=xxxx batch=yes This command invokes the printer and ^[%12345X@PJL @PJL SET RESOLUTION=300 @PJL SET PAGEPROTECT=OFF @PJL SET ENTER LANGUAGE=PCL ^[%1A^[E^ @PJL RESET ^[%12345X
is what it prints.Realizing that this is because of the missing parameter,tried to change paramform=yes but I am not sure how to pass the parameter.
my problem is this. I created the java classes using itext to create a document library. Rtf, or. Odt. I integrated classes in Oralce form and everything works. I created a file. Odt application server on a folder and now only remains for me to open the file. The roads are two:
1. Directly from the server, you can?
2. From the client using the API or openoffice launching the executable with cmd?
Oracle Forms is a command to transfer files on the client and run the executable swriter of openoffice?
create or replace procedure log_file ( odsm_profile IN VARCHAR2 ) AS handle utl_file.file_type; begin
[code].....
i have error when executing this pl/sql procedure in timesten in UNIX
this is the excution error:
Command> exec log_file('hi'); 8507: ORA-29280: invalid directory path 8507: ORA-06512: at "SYS.UTL_FILE", line 41 8507: ORA-06512: at "SYS.UTL_FILE", line 478 8507: ORA-06512: at "SIUA.LOG_FILE", line 8 8507: ORA-06512: at line 1
I am using Oracle 9i and Unix on my system and trying to execute a UNIX shell command through external procedure in C.I created a shared lib (libextproc.so) for the following function.
int sysrun(char *command) { return system(command); }
This function runs fine when caled through a driver function in C, meaning that the shared lib is fine.In PL/SQL, I have used the following method to invoke a UNIX command:- create or replace library shell_lib as '/home/ECETRAonsite/oracle/OraHome1/lib/libextproc.so'; / create or replace function sysrun (syscomm in varchar2) return binary_integer as language C name "sysrun" library shell_lib parameters(syscomm string); /
Now when I call this PL/SQL function to invoke the command, it is run succesfully but does not create the file.
PL/SQL procedure successfully completed.I have verified that the path for 'touch' is correct.Following are my configuration files. listener.ora ------------- LISTENER = (DESCRIPTION_LIST = (DESCRIPTION =
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
Below is my code for calling a report from form in windows environment. I want to use the same report to be called from Unix environment . When m using application server tbanner@.... instead of 'repsrv@ahad-pc' is throwing error its in UNIX environment
REP-51002: Bind to Reports Server tbannerdb.kfupm.edu.sa failed
Am tring to export a data from oracle forms to excel. I use ole2 option. it is working perfectly in my desktop. But when i move the same to our application server, it is not working. I belive OLE is related to Microsoft office and our server is unix based.
I'm trying to install Oracle 11gR2 RAC on AIX, do we need to turn on Multicasting, can we install without multicasting? Also can I have the ASM disk with external redundancy for OCR and Voting Disk?
#runs the selected process ${ORACLE_HOME}/bin/sqlplus -s ${USER_PASS} >${TMP_FILE} <<EOF set pause off set verify off set pagesize 0 set linesize 2000 set timing off [code].........
I am passing a Date to the Oracle Procedure in `date +'%b_%d-%H:%M:%S'` format.
I'm on Oracle 11g R1. I've a requirement where user will be putting CSV files on Unix server and I've to create a job which runs periodically to check if any new file is added by user in the folder. If it finds a new file (s), then it needs to identify it and insert its name in an Oracle table. Once file's name is noted, it has to move file from that directory to another one.
I need to develop a form which has to read and display the contents of a text file that is stored in the Unix system where the Oracle data base is installed. So basically its the database server and not the forms application server.
1. Create an external table for the file everytime when the form is loaded by dropping and re creating the table and base the data block in the form on that table and execute_query and display the contents.
2. I am confused whether to use webutil or utlfile packages to read from the file and display on the screen as the file resides in the database or Oracle server and not forms application server or client machine.
I would like to ask you if you know which built-in can I use for transferring a excel file from our Unix box to a table in oracle database, right now we are using webutil_file_transfer.Client_To_DB_with_progress using forms developer, but I need to run as an automatic process uploading form unix into oracle directly without using forms.
I have a file which is placed on a certain location on unix server. I want to write a code which picks up that file and emails it to certain recipients.
I am trying to Push the data from Oracle which is running in HP-UNIX to SQL Server. But don't know the efficient way to connect the SQL server from oracle which is running on HP-UNIX.I have heard about oracle Heterogeneous Connectivity but don't know exactly how to implement it in Unix environment.
I would like to develop a form which will be replica of windows explorer.It should be able to read all files or files from a specific folder from an unix platform.
if yes can i have a template. I do not want to start from the scratch since I do not have much time.
We are using Oracle Applications hosed on UNIX servers. There is a custom form in XXX_TOP/forms/US folder that I need to modify.
My Windows desktop has Forms Builder 10g installed. I ft pied fmb file over from UNIX server to my Windows desktop and tried opening it. I get an error FRM-18108:
Failed to load the following objects: APPSTAND, etc etc.
Obviously I am not doing it right. What is the correct way of modifying a form file sitting on UNIX server, using Forms Builder installed on Windows desktop? Do I need to copy all dependent objects to Windows desktop along with fmb file?
We have an application that fetches and writes data into oracle database through pro c. oracle datyabase is on another server.
We are storing some secure information into oracle database so we want to encrypt the data sent by our aplication into oracle database.We do not want to use SSL(i.e certificates) and also do not want to make use of Advance Security Option available in oracle and also do not want to make any changes in sqlnet.ora file on server side.
achieve encryption of traffic between our application and Oracle database?
I have several forms developed in Oracle forms builder 10g version 9.0.4.0.19. It contains Hierarchical Tree items. when i run this form on this version of oracle, it's running properly. but when i compile and run it on oracle forms 10 version 10.1.2.0.2, it shows an error message stating Assertion Failed!, if I click on the Tree item. I cant find out what and where the problem is. If I build a new form with tree item, it is working properly.
i tried to run the report via oracle froms 10g in BUTTON CLICK. But i got the error like "FRM-41219 : CANNONT FIND REPORT:INVALID ID". I did the Following code.
I am using windows Xp environment. Downloaded the software from Oracle website. Database is Oracle Express on windows. Have installed Oracle Forms 10.1.2.0.2 and OC4J also on windows xp Installation is fine and i am able to run forms same day. THe next day i am not able to run Oracle forms, i get error frm-92101 error.
I have tried posting this in various oracle forums and have not got a solution yet. I tried reinstalling. Every time i reinstall, it works for a day (the day i install, i have been able to create forms, compile and run them) but it does not work the next day. THis has happened thrice (reinstalled thrice).
Oracle JInitiator: Version 1.3.1.22 Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM User home directory = C:Documents and SettingsuserProxy Configuration: no proxyJAR cache enabled Location: C:Documents and SettingsuserOracle Jar Cache Maximum size: 50 MB
I am getting following error when we submit request through button in forms.but backend it is created.
ORACLE error 6550 in FDPSTP
Cause: FDPSTP failed due to ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'XXPL_PO_REQ_INTER_MAIN' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
