We are in the design phase of a project and wanting to implement a 4 node RAC with a DR site. However to get around some licensing costs, management are insisting that only 1 node be up accepting data at the DR site. In the event of a disaster, the remaining nodes will be switched on.
View 3 RepliesI am configuring two node RAC on oracle virtual box. Did its mandatory to configure DNS on both nodes before Rac installation? Whats the purpose of DNS in RAC. And if its mandatory did i have to configure DNS on each node separately?
View 1 Replies View RelatedI'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
[code]..
current environment
Oracle VM 2 Node RAC cluster
Oracle 11G 11.2.0.3.0
Oracle 11g rel 2 GI
on current 2 node cluster we have GI and RAC db configured Nodes: vmorarac1,vmorarac2
we shutdown vmorarac1 to clone it to vmorarac5
on new node I have changed the hostname to vmorarac5 In /etc/sysconfig/network-scripts/ifcfg-eth0 change ip to new ip and same for /etc/sysconfig/network-scripts/ifcfg-eth1 152.144.199.210,152.144.199.211
mad echanges to /etc/hosts on vmorarac1/2 for 2 new IP address assigned to vmorarac5
152.144.199.171 vmorarac1.pbi.global.pvt vmorarac1
192.168.2.30 vmorarac1-priv.pbi.global.pvt vmorarac1-priv
152.144.199.184 vmorarac1-vip.pbi.global.pvt vmorarac1-vip
[Code]....
Query is is that all ok to reboot the new node to reflect changes as below and change the hostname to vmorarac2
152.144.199.210 vmorarac2.pbi.global.pvt vmorarac2
192.168.2.32 vmorarac2-priv.pbi.global.pvt vmorarac2-priv
152.144.199.211 vmorarac2-vip.pbi.global.pvt vmorarac2-vip
hostname change in /etc/sysconfig/network
On new node vmorarac5, there is alreay software for RAC DB and GUI cloned from vmorarac1
addnode.sh is used to add existing node, but as part of pre-requisite configuratoin is there any config step missing
I believe, in a multiple RAC Physical Standby nodes only one node applies the archivelogs to the standby database. How you can find which node is the APPLY NODE using a SQL query?
I know you can veiw this information by querying the standby configuration using DGMGRL but how would you find out this information from a remote client using SQLPlus/PLSQL?
We have oracle database 10g(10.2.0.4) running on AIX 5.1. we have installed 2-node RAC on another server AIX 6.1 . Now we want to migrate our single node database to new 2-node rac environment. how we can move/migrate/cluster-aware our single node database to 2-node rac?
View 3 Replies View RelatedISSUE : I have to create ORACLE 10G R2 RAC. This cluster will host two databases pre-prod and prod. Both databases will be on different networks. pre-prod on 10.88.119 and prod on 10.88.118. I just have two hosts forming the this cluster.
How can i configure my hosts file and during clusterware installation what entries should i make for hosts and interfaces. Can this be done in 10g or will have to switch to 11g.
I am installing Oracle 10g Clusterware in RHEL 5 Server. When i run root.sh in the second node the last step Running vipca(silent) for configuring nodeapps failed. Then i run VIPCA manually in second node and configured vip configuration successfully,but when i checked the post-checks for cluster services the Checking existence of VIP node application,Checking existence of ONS node application and Checking existence of GSD node application in second node failed. I am able to ping both the servers one another with vip name successfully and the CSS,CRS and EVM appears healthy in both nodes. 1. Does the vip configuration is proper? If no what is causing this error and how to rectify it? Find the output below
[root@Rhel52 bin]# ./crsctl check crsCSS appears healthyCRS appears healthyEVM appears healthy[root@Rhel52 bin]#[root@Rhel52 bin]# clear[root@Rhel52 bin]#[root@Rhel52 bin]# ./crs_stat -tName Type Target State Host------------------------------------------------------------------------------------ora.rhel5.gsd application ONLINE ONLINE rhel5ora.rhel5.ons application ONLINE ONLINE rhel5ora.rhel5.vip application ONLINE ONLINE rhel5ora.rhel52.gsd application ONLINE ONLINE rhel52ora.rhel52.ons application ONLINE ONLINE rhel52ora.rhel52.vip application ONLINE ONLINE rhel52 [root@Rhel52 bin]#./runcluvfy.sh stage -post crsinst -n
[code]....
I would like get more details about single node RAC.. What is single Node RAC?..
1). just configure only one server instead of two node... same RAC installation.. cluster installation and shared disk configuration in single server itself.. in future we can add node to this ...
2). in 11gR2 having new feature Single Node RAC.. Multiple instances running on same node and configure using Cluster...
is there any advantage using single node rac(other than online upgrade to full RAC).
i have installed oracle 11g r2 rac with 2 nodes. i want to configure the client side load balancing and server side load balancing. For the client side load balancing the i have configured with the
(FAILOVER=ON) (CONNECT_TIMEOUT=5) (RETRY_COUNT =3).
and to configure server side load balancing i have modified the service as follows:
execute (DBMS_SERVICE.MODIFY_SERVICE (service_name=>'service_name', clb_goal=>DBMS_SERVICE.CLB_GOAL_SHORT);
now i have few questions:
1. for the server side load balancing do we have to configure the REMOTE_LISTENER on each node so that the instance on each node registers with the listeners on other node.
2. if we have 3 nodes does this mean that we have to configure the REMOTE_LISTENER on 3 nodes to register with the listeners on the other remaining 2 nodes.
3. does the listener have to be registered with the vip network address (where the clients usually use to connect).
I newly joined Oracle 11g DB related project.That oracle environment own our customer and we have only limited time and access to that DB.
I could login that database by SQLPlus by sys user as sysdba but I do not know any DB configurations. How could I collect Oracle 11g DB configuration information from SQLPlus ?
Tried installing APEX 4.2 with Oracle EBS 12.1.3. I have installed APEX into the Oracle EBS database (11.2.0.3)
I am trying to install the APEX listener on the Web Tier however it starts the listener and gives the url as
[URL]........
Is there a way to set this with actual hostname of the server.
I have installed oracle 10g in D drive . The installation says it is successful, without asking the database name or the password . I have followed the steps given in the attached file .
However it is not asking the database name or password ( no configuration set up is appearing for the user to interact with the system ) . So, after installation I can not give the username and password .
I have been reading a lot of documentation regarding oracle services and I have an ok understanding of how they work. However, I have a general question regarding configuring services using Oracle RAC. For instance, if I have a 2 node oracle 11GR2 RAC on a Linux Redhat server. I have an application that connects to a service I have created. I create the service as follows.
srvctl add service -d ORCL_RAC -s APP_SERVICE -r ORCL_RAC1,ORCL_RAC2
The tnsnames contains:
APP_OLTP =
(DESCRIPTION =
(LOAD_BALANCE = ON)
(FAILOVER = ON)
[code]...
My questions are as follows:
1) When I do a 'srvctl status service -d ORCL_RAC', should I see the service running on both nodes of the RAC? Or does it run only one node, then it will fail over to the other when needed?
2) If I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 is only running on node1 and RAC_SRV2 is only running on node2. There are two applications sharing the same database, one application is using RAC_SRV1 and the other application is using RAC_SRV2. Am I correct in thinking that there is no failover available here? If node1 goes down, the application connecting to RAC_SRV1 will not be able to connect to node2 right?
3) In the case of the scenario in question 2 above, would it be best practise to simply create one service and have both applications connecting to the one service? Could I configure the one service to point connections from one application to node1 and connections from the other application to node2?
we are running Oracle database 11.2.0.3 on RHEL 6.1.
Should we join the above machine to an existing Windows 2003 (Active Directory) Domain? or Configure it as a standalone Server?.
when iam running netca on oracle llg iam getting the following error..[wstdba@ora11g ~]$ netca
java.io.FileNotFoundException: /oraeng/app/oracle/product/11.1.0/app/oracle11g/cfgtoollogs/netca/netca_OraDb11g_home1-0802284PM3437.log (No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1...All my services are up and running..
I am trying to create a rac setup on oracle 10.2. through NFS cluster configuration .i succeeded with the installtion of cluster configuarion and installation of oracle software ,but when i am trying to create database ,
View 2 Replies View RelatedData Base Configuration assistant for create new database not working in oracle 8.1.7 in windows server 2000 / server 2003 how can i create new database
View 1 Replies View RelatedThe installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh
WARNING: directory '/home/oracle/product' is not owned by root
WARNING: directory 'home/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
the ./cluvy shows the cluster is valid.
I m using Windows Vista Business 32 bit , Oracle 10.2.0.3
while running my setup so many time i got same error each and every time Error:12560 TNS Protocol Adapter error and it shows me i attached my screen shot with my thread , and remember i already installed earlier but at that time there was no error and successfully installed, i removed the total software before installing and i also removed my environment variable and after getting this Database Configuration Assistant failure there is no service is started regarding my database.. I also tried manually but there also i got some other problem if by Database Configuration Assistant it ll b solved then it ll be good for me.
While installing 11g oracle grid cluster software. I am getting below error.
[INS-40724] No locally defined network interface matches the SCAN VIP subnet.
i have given scan name as scan-cluster.invent
host-name virtual ip name
rac3 rac3-vip
rac5 rac5-vip
I am able to ping rac3 and rac5 from both nodes.
MY /etc/host file look like this.
192.168.2.133 rac3.invent.com rac3
192.168.2.132 rac3-priv.invent.com rac3-priv
192.168.122.1 rac3-vip.invent.com rac3-vip
192.168.2.136 rac5.invent.com rac5
[code]...
ssh connectivity everything works fine.
I'm trying to add the third node to my existing two node cluster. In fact i succeded adding the node but i have the following problem:
-when i start node 1 and 2, everything is ok, but on node 3 startup one of the other nodes fails
-this happens in any combination: start 1 and 3, everything is ok. when i start node 2, node 3 fails
The asm configuration (disks, permissions, etc) is the same on all three nodes.find below the asm and crsd log details from the failure time:
alert_ASM.log
NOTE: enlarging ACD for group 1/0x124851d1 (DATA)
WARNNING: cache read a corrupted block group=DATA dsk=4 blk=1 from disk 4
+NOTE: a corrupted block from group DATA was dumped to /u01/app/oracle/diag/asm/+asm/+ASM3/trace/+ASM3_rbal_4109.trc+
WARNNING: cache read(retry) a corrupted block group=DATA dsk=4 blk=1 from disk 4
[code]...
When I added a new node to RAC (existng 2 windows server 2008 R2 nodes), using the command,
CODEaddNode -silent
"CLUSTER_NEW_NODES={node3}" "CLUSTER_NEW_PRIVATE_NODE_NAMES={node3}"
"CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}"
the output was "The cluster node addition <path> was successful".
But when I tried the following command,
CODEcluvfy stage -post nodeadd -node3
I got an error stating
QUOTE "ERROR: Shared resources check for node addition failed
The following node is not in cluster: node3
Post-check for node addition was unsuccessful on all the nodes."
When I checked the inventory logs, I found the following entry
QUOTE SEVERE:
oracle.sysman.oii.oiix.OiixException: The Oracle home '<path>' could not be updated as it does not exist.
at oracle.sysman.oii.oiic.OiicBaseInventoryApp.getOracleHomeInfo(OiicBaseInventoryApp.java:645)
at oracle.sysman.oii.oiic.OiicUpdateNodeList.doOperation(OiicUpdateNodeList.java:206)
at oracle.sysman.oii.oiic.OiicBaseInventoryApp.main_helper(OiicBaseInventoryApp.java:790)
at oracle.sysman.oii.oiic.OiicUpdateNodeList.main(OiicUpdateNodeList.java:399)
I've installed without problems Oracle 8.0.5 on WS 2003. After installation I've created 8 databases, with the utility Database Configuration Assistant (dbassist, executed by launch80.exe).
After that, the DBAssist doesn't run anymore.
I've tried EVERYTHING. And I have no success, Im stuck. And I need to create several databases.
How to find out which node is master node in oracle 9i RAC database.
View 7 Replies View RelatedCan i setup 2 node oracle RAC using vmware server in a single laptop..? cpu-intel i3 memory 4GB.
View 1 Replies View RelatedHow to make node to deferred node in oracle workflow ?
View 2 Replies View RelatedI have two node RAC database running on linux machine (Oracle10G SE), our requirnment is to install new oracle binaries for Oracle10G EE on diffrent home location.after install Oracle10G EE binaries on new oracle home , i want to point our existing database to new Oracle10G EE home to adotp a features of Oracle10G EE features.
But at the same time i dont want to deinstall our Oracle10G SE binaries.So it is possible to rollback our process to point our database back to Oracle10G SE from Oracle10G EE in case anything going wrong.
<RCA>
<SUB_PROBLEM_TYPE>
Bla bla bla...............
</SUB_PROBLEM_TYPE>
[Code]....
I wish to generate in my html form like..
PREVENTION: bla bla bla....
Is there any simple way to query out ?
I try
"SELECT T1.root_cause_analysis.query('/RCA/PREVENTION') as RCAXML from Submission_Record.............."
set rx=server.createobject("adodb.recordset")
rx.open sqlxmltest,con,1,3
while not rx.eof
<table>
<tr>
<td ><% response.write rx("RCAXML")%></td>
</tr>
</table>
BUT IT GIVE ME AN ERROR... [ORA-22806: not an object or REF]
We have to configure Dataguard for our 24x7 critical banking 2 Node RAC database(10.2.0.4). Before proceeding with the configuration we have to make sure what steps we should follow to have minimum or no downtime.
1) Document covering DG setup in RAC environment.
2) We have to perform switchover as well so need its steps too. Either the normal switchover steps would be used or have to stop/start rac services as well.