We have to configure Dataguard for our 24x7 critical banking 2 Node RAC database(10.2.0.4). Before proceeding with the configuration we have to make sure what steps we should follow to have minimum or no downtime.
1) Document covering DG setup in RAC environment.
2) We have to perform switchover as well so need its steps too. Either the normal switchover steps would be used or have to stop/start rac services as well.
I would like get more details about single node RAC.. What is single Node RAC?..
1). just configure only one server instead of two node... same RAC installation.. cluster installation and shared disk configuration in single server itself.. in future we can add node to this ... 2). in 11gR2 having new feature Single Node RAC.. Multiple instances running on same node and configure using Cluster...
is there any advantage using single node rac(other than online upgrade to full RAC).
We have oracle database 10g(10.2.0.4) running on AIX 5.1. we have installed 2-node RAC on another server AIX 6.1 . Now we want to migrate our single node database to new 2-node rac environment. how we can move/migrate/cluster-aware our single node database to 2-node rac?
here we have san server and rac database two node database.i want to know how can i create directory on rac database. i know how to create directory on single database but i do not know how can i create directory on rac database.
we encounter a problem with a 2-nodes RAC with 11gR2 SE : Database RAC is correctly running but we encounter problems using RAC TNS entry, obtaining the message ORA-01033.We can access to the DB using a TNS entry using each one of IP addresses but when we use the SCAN address, it fails. 2 weeks ago RAC2 node could connect perfectly with the SCAN address but RAC1 (used as a client) obtained error message almost 30% of tries.
We made a reboot of RAC1 node and now SCAN address works correctly from RAC1 and RAC2 (used as a client) fails systematically with SCAN address but works perfectly with direct access to the database.On both nodes, SCAN address is perfectly resolved by DNS server, cluster seems correct, listeners seems correct...We have opened an SR on Metalink 4 weeks ago but we don't progress.
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
************************************* [root@bsfrac01 grid]# sh root.sh Running Oracle 11g root.sh script...
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name 2011-02-13 00:11:55: Checking for super user privileges 2011-02-13 00:11:55: User has super user privileges
I am configuring two node RAC on oracle virtual box. Did its mandatory to configure DNS on both nodes before Rac installation? Whats the purpose of DNS in RAC. And if its mandatory did i have to configure DNS on each node separately?
I have two node RAC database running on linux machine (Oracle10G SE), our requirnment is to install new oracle binaries for Oracle10G EE on diffrent home location.after install Oracle10G EE binaries on new oracle home , i want to point our existing database to new Oracle10G EE home to adotp a features of Oracle10G EE features.
But at the same time i dont want to deinstall our Oracle10G SE binaries.So it is possible to rollback our process to point our database back to Oracle10G SE from Oracle10G EE in case anything going wrong.
I am trying to install oracle 10g RAC on CentOS release 5.4 (Final), But when I am not able to configure SSH between oracle users on both node.
Node 1 -------- [oracle@node1 ~]$ id uid=600(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) [oracle@node1 ~]$ date Thu Dec 30 05:14:10 IST 2010 [oracle@node1 ~]$ ------------ Node2 ---------- [oracle@node2 ~]$ id uid=600(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) [oracle@node2 ~]$ date Thu Dec 30 05:15:32 IST 2010 [oracle@node2 ~]$ --------- OS ---------- [oracle@node2 .ssh]$ cat /etc/redhat-release CentOS release 5.4 (Final) [oracle@node2 .ssh]$ date --------- Host for both node -------- [oracle@node2 .ssh]$ cat /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost # Public 10.1.1.10 node1 10.1.1.11 node2 #Private 20.1.1.10 node1-priv 20.1.1.11 node2-priv #Virtual 10.1.1.21 node1-vip 10.1.1.22 node2-vip ------------------------ I am using the command to configure SSH provide in the link
I have a SAN Storage device of 8TB size . I am new to rac setup ,i dont know how to configure the SAN device for RAC SETUP on ASM..how to configure the SAN device for RAC setup on ASM
How many disks we need to have? which and sholud be on ASM ? how to impliment raid10 for database file disk and raid5 for arhcive log files
we don't have system or storage admin available..I have to create the development environment. I have 2 Dell 2950 Power Edgde Servers and 500 GB Buffalo NAS with Windows 2K3 X64 EE, tell me whether I can install Oracle RAC with this kit.
If yes , how can I configure shared storage and present it to OS so that both nodes can see it.
I have 2 node 11gR1 running on Unix, I want to add 3 more RAC node to it. What are all the steps involved and should I first add 3rd node and then the 4th node or I should add both at the same time? is there any difference between these two methods?
I have many other rac servers and sids setup this way and they all work,,I can login to sqlplus and do any changes .. no issues going into sqlplus in node 207 and node 208..I have checked the directory i.e mesg and teh files are there ..
I think the message is decieving as it complains about oracle home and sp1<lang>.msb not found ,, when i tis there.I have also checked my env variables .. they all there i.e
scrbdefrmr207:orarer 58> env |grep ORA dbms_type=ORA ORACLE_SID=RER001 ORACLE_HOME=/oracle/RER/102_64 ORACLE_BASE=/oracle
I have 2 node 11gR2 RAC running on AIX 6.1, after I shutdown the database and restart crs using crsctl start crs, ASM instance comes back up but not the database and I had to start the database using srvctl, isn't that the database should come up when I start the crs?
I have a production database with 2 node Physical RAC ENV on two separate machines , and we are going to enable audit trail parameter to DB values to capture all failed login attempts on a database.
we have done this on our testing ENV but dont know the procedure to deploy this steps on 2 node RAC ENV . I have done the below steps on our standalone testing ENV
1.Log in as SYS and connect with the SYSDBA privilege. oUser Name: SYS oPassword: Enter your password. oConnect As: SYSDBA
2.To enable audit on DB use below command SQL>alter system set audit_trail=DB scope=SPFILE;
3.Then restart the database.
4.After successful startup use the below command to capture log SQL> audit create session whenever not successful;
steps to enable audit_trail to capture failed login attempts on two node RAC ENV.
i am configuring asm on clusterware when i create instance on node1 and node 2 a message screen appear " Cant start asm instance on node 2)When i start asm instance manually on node 2 i found the below error in alert log file.
ORA-27508 IPC error sending a message ORA-27300 OS system dependent operation:send msg failed with status: 101 ORA-27301 OS failure message: Network is unreachable ORA-27302 failure occurred at: sskgxpsnd1
during installtion of Oracle RAC 11g r1 on Linux using VMware server, all the pre cluster installation was successful, and root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
I have installed Oracle 10g RAC crs and asm on CentOS release 5.4. When I am rebooting the nodes and starting crs manually All the services on both nodes starting successfully.
1.In 2 node rac while adding datafile to tablespace if you forget to mention '+'then what will happen whether it is going to be create or it throws an error if it creates where exactly located and other node users how to work on that tablespace .what all steps to perform that datafile is useful for all node users.
2. In Rac environment how to check how many sessions connected to particular node.
3)In Rac any node is evicted due to network failure then after we rebuild the network .Is there any steps to do manually to access the failure node after rebuilding the network or it will automatically available in cluster group which service is perform this activity.
4.While configuring cluster ware you choose voting disk and ocr disk location and which redundancy you will choose suppose if you go for normal redundancy how many disks you can select for each file either one or two?
I have implemented Rac One node with two machine(dbtest01,dbtest02) in 11.2.0.3 Redhat 5.3 one for online another one for offline. i have created TAF also.
dbtest01 is online and create one query DECLARE i number(36):=1; begin while(i<10000000) loop dbms_output.put_line(i); i:=i+1; end loop; end;
i executed above query for test and i made relocate database using srvctl utility to dbtest02 machine.
session is relocated successfully with new session id...above query getting stop in 25000 itself. i want to make it continue that process..also i tried to find Omotion utility in all the path.. couldn't find it... where will it be.. i want to relocate all the session without losing work.
from application i am getting disconnect after relocation.. application server need to restart to get work again...
I have the following problem on a 10.2.0.4 Oracle on AIX 1.6...
I have 2 RAC nodes as the node # 2 goes down, the VIP migrated correctly to the node # 1, but the listener # 1 do not see the change, and just resolve to the local ip.
The same does not apply in the reverse case, when it drops the node N 1, the listener attends to the fallen VIP node and migrated.The configuration is correct and identical in both nodes, according to the documentation, but I can not find a reasonable answer.
IP node # 1. scm1or01 192.68.60.11 scm1or01-VIP 192.68.60.13
IP node # 2 scm1or02 192.168.60.12 scm1or01-VIP 192.168.60.14
Below I write as I detect the problem: when scm1or02 is down:
