we don't have system or storage admin available..I have to create the development environment. I have 2 Dell 2950 Power Edgde Servers and 500 GB Buffalo NAS with Windows 2K3 X64 EE, tell me whether I can install Oracle RAC with this kit.
If yes , how can I configure shared storage and present it to OS so that both nodes can see it.
I wish to install 11g r1 RAC on my laptop having linux 4 as platform (on vmware) , for that i prepare 4 partition for that (on node1)
/dev/sdb1 - for ocr
/dev/sdb2 - for voting disk
/dev/sdb3 - for asmdisk group
/dev/sda5 - fro asmdisk group
by assuming external redundancy for ocr and voting disk i kept only one disk
and i configured following in /etc/sysconfig/rawdevices
/dev/raw/raw1 /dev/sdb1 -- ocr
/dev/raw/raw2 /dev/sdb2 -- voting disk
/dev/raw/raw3 /dev/sdb3 -- asmdisk group
/dev/raw/raw4 /dev/sdb5 -- asmdisk group
and my question is how node2 can understat these raw device as shared storage?
Oracle 9i instalation problems in Windows Storage Server 2003.
I got the error "ORA-12546- TNS:Permission denied" when trying to install ORacle 9i in Windows Storage Server 2003. This error occurs at the time of Creating database.
I am trying to install Oracle RAC 11g on Oracle Linux via Virtual Box. My host server is windows. How to create shared storage on windows?
View 5 Replies View RelatedI am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies View RelatedI want to Transfer Oracle Database 11g Release 11.1.0.7.0 on windows 2003 32 bit server to Windows 2008 server 64 bit I have Cold RMAN backup. and directory structure of both server are same Do i need to do anything to change datafile to 64 bit or do i need to apply any change to any object
View 6 Replies View RelatedDoes Oracle Database 10.1.0.2 (64-bit) compatible with windows 2003 R2 standard X64 edition with Service pack 2.
View 1 Replies View RelatedIn one of the book (Personal Oracle Real Application Clusters: Create Oracle 10g Grid Computing) I have seen the detailed explanation to configure Oracle 10g RAC on external disk- MAXTOR A01A200.
Is it possible to configure Oracle 11g Release 2 RAC with two node using MAXTOR disk?
or Is there any other external disk available which I can use it as a shared storage?
I wanted to setup a two node 11g RAC with ASM at my home for learning purpose. I have read many documents to configure shared storage using NFS, Openfiler, VMsetup etc. Is there any hardware available (something like maxtor disk) which is not much expensive to setup a shared storage ?
View 3 Replies View RelatedSome shops run Oracle RAC using "conventional" storage, like emc, netapp, etc. Some shops run Oracle RAC using JBOD, just bunch of disks, all redundancy is managed by ASM.
How would you distinct these two approaches? JBOD approach sounds cheaper, so why serious enterprises are still using traditional conventional storage, like netapp and emc?
I am trying to install oracle 10g RAC on CentOS release 5.4 (Final), But when I am not able to configure SSH between oracle users on both node.
Node 1
--------
[oracle@node1 ~]$ id
uid=600(oracle) gid=500(oinstall) groups=500(oinstall),501(dba)
[oracle@node1 ~]$ date
Thu Dec 30 05:14:10 IST 2010
[oracle@node1 ~]$
------------
Node2
----------
[oracle@node2 ~]$ id
uid=600(oracle) gid=500(oinstall) groups=500(oinstall),501(dba)
[oracle@node2 ~]$ date
Thu Dec 30 05:15:32 IST 2010
[oracle@node2 ~]$
---------
OS
----------
[oracle@node2 .ssh]$ cat /etc/redhat-release
CentOS release 5.4 (Final)
[oracle@node2 .ssh]$ date
---------
Host for both node
--------
[oracle@node2 .ssh]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
# Public
10.1.1.10 node1
10.1.1.11 node2
#Private
20.1.1.10 node1-priv
20.1.1.11 node2-priv
#Virtual
10.1.1.21 node1-vip
10.1.1.22 node2-vip
------------------------
I am using the command to configure SSH provide in the link
[URL].......
I want to configure row device to usable for creating new asm diskgroup.we are using ASM. Steps to configure that row device to available for creating new diskgroup.
View 2 Replies View RelatedI am trying to apply 11.2.0.2.5 psu on a 2-node cluster running on RHEL 5.5 vms. Followed ORACLE-BASE examples when installed this laptop RAC. I am not using any ACFS and none of GI and DB homes are shared. But, on node 2, cluvfy THINKS database home is shared.
[oracle@rac1 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle/product/11.2.0.2/db_1 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle/product/11.2.0.2/db_1" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac1 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle_grid/product/11.2.0.2 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle_grid/product/11.2.0.2" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac1 trace]$ hostname
rac1
[oracle@rac1 trace]$ echo $ORACLE_HOSTNAME
rac1
[oracle@rac1 trace]$
##################################################################################
[oracle@rac2 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle/product/11.2.0.2/db_1 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle/product/11.2.0.2/db_1" is shared
Shared storage check was successful on nodes "rac2,rac1"
Verification of shared storage accessibility was successful.
NODE_STATUS::rac2:SUCC
NODE_STATUS::rac1:SUCC
OVERALL_STATUS::SUCC
[oracle@rac2 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle_grid/product/11.2.0.2/ -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle_grid/product/11.2.0.2/" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac2 trace]$ hostname
rac2
[oracle@rac2 trace]$ echo $ORACLE_HOSTNAME
rac2
[oracle@rac2 trace]$
I can not determine any reasons and do not know how to fix.
provide me the online material or some links where i can follow the instructions step by step to configure 10G RAC on LINUX 5.0 machine.
I have 3 separate machines having Linux 5.0 . I want to do this for R&D purpose.
I have a SAN Storage device of 8TB size . I am new to rac setup ,i dont know how to configure the SAN device for RAC SETUP on ASM..how to configure the SAN device for RAC setup on ASM
How many disks we need to have? which and sholud be on ASM ? how to impliment raid10 for database file disk and raid5 for arhcive log files
I am looking for Oracle database 10g (best if it is the lastest release of 10G) 64bit for windows2003 64bit machine but cuold not find the download (Oracle has took this off line, only 11g is available). where can I get this installation file?
View 1 Replies View RelatedDoes already installed Oracle 10g (10.2.0.1) on a windows 2003 server x64? Do you notice strange behaviors, any errors after the installation?
Does already installed Oracle 10g on a windows virtual machine? Are there any prerequisites?
i have a question about oracle database 9i in windows server 2003 R1 X86 . I set the parameter of pga_aggregate_target=1000M and 500M sometimes i found after few days that error message appear to client
ORA-12500 TNS:listener failed to start a dedicated server process
when i try to connect from the server sometimes logon and sometimes another message appear
ORA-12560: TNS:protocol adapter error
i think the problem in pga_aggregate_target value
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server...So far i have just installed the oracle software on 64bit windows 2008 server.how to move the data or migrate from old server to new server..
View 1 Replies View RelatedIs it possible to set a physical standby between 2 servers with same OS but different level ? I mean primary has windows 2003 SP1 and Standby has windows 2003 SP2. I want to know if it will work properly or not.
View 1 Replies View Relatedi have windows 2003 server, oracle 10g release 2 installed, but enterprise manager is not exist.
how could i install enterprise manager without risk , without need of restarting database?
it is a production database.
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
*************************************
[root@bsfrac01 grid]# sh root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name
2011-02-13 00:11:55: Checking for super user privileges
2011-02-13 00:11:55: User has super user privileges
[code]....
We have to configure Dataguard for our 24x7 critical banking 2 Node RAC database(10.2.0.4). Before proceeding with the configuration we have to make sure what steps we should follow to have minimum or no downtime.
1) Document covering DG setup in RAC environment.
2) We have to perform switchover as well so need its steps too. Either the normal switchover steps would be used or have to stop/start rac services as well.
I have a 11g database installed on a windows 2003 server. When I created the database I could not assign more than 2GB for SGA_TARGET where as I have 16GB of RAM available on the server. I created the database with SGA_TARGET as 1.5 GB and Memory_TARGET as 2GB. I could create the database successfully. Later when I again tried to increase SGA_TARGET to 6GB and MEMORY_TARGET to 8GB, I could not start the database. I got below error;
ORA-27102: out of memory
OSD-00022: additional error information
O/S-Error: (OS 8) Not enough storage is available to process this command
Quote:I added /pae in the boot.ini
Added AWE_WINDOW_SIZE key to registry as 2000000000
Set use_indirect_data_buffers=true
added db_block_buffer=131072 (ie. 2GB DB_BLOCK_SIZE=16kb)
java_pool_size= 1000M
large_pool_size=1000M
shared_pool_size=2000M
I got again the same error
I could not use SGA_TARGET. So is AMM not allowed with AWE?
I have Oracle 9i DB in windows 2003 server, I want to access this DB from Linux desktop. Is there any 'client software' is available to connect Or procedure to connect the DB.
View 0 Replies View RelatedWe are setting RAC between two machines(Desktop PC connected wirth LAN ....have storage Local to them and no Shared storage..Only NFS).We have shared the mount point by NFS.We do not have any shared storage but we need to share the RAW files to setup the OCR and VOTING DISKS.
The problem is:
1. We need to keep the RAW devices for OCR and voting disk common to the machines (Desktop PC..both Linux OELU5). I am able to create the raw file systems but that is local to one machine. I am not able to understand how to share the raw devices between two machines.
2. Tried to use ISCSI utility but that did not work. (How_to_use_iSCSI_Targets_on_Linux)
Scenario : One Machine has 500 GB Storage. Second machine has 80 GB Storage. Made private and public networks(Used two Network cards in LAN). All are communicating.
Problem : Need to make the storage 300GB (Out of 500 GB) of Machine 1 as shared storage. How can we do that? (Do we need any virtual software...ex .. vmware for that?)
I am trying to return a value of an oracle stored procedure using Excel VBA.
OS: Win XP SP3
Excel 2003
Ora Client: 11g
By trying different things I have noticed, that I could have troubles with the ODBC-connection. Maybe I am not using the right one. To store data returned from select statements I have an ODBC-Connection (Driver: Oracle in XE), which works perfectly, e.g.:
'-----------------------
Sub Extract_Data()
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Dim db_name, UserName, Password As String
cn.Open db_name, USerName, Password
[code]....
When debugging the connection string, I find the Provider=MSDASQL5.1.
I installed Oracle 10g (10.1) in Windows Server 2003 and i am able to connect to oracle using using SQL net. But when I tried to connect this using SQL Net from Windows XP, I am getting ORA-12560: TNS:protocol adapter error. But when I tried to connect as SYSDBA user, I am able to login in SQL plus. But for a normal user, not able to log in.
View 1 Replies View RelatedI have a database running on 10205 version. It is a RAC database with ASM storage.
I want to migrate this database to other server and upgrade this database to 11202 version .
I am looking for different cheap storage options to build test RAC setup for DB on Linux@Dell PowerEdge T100 .
View 1 Replies View Related