RAC/ASM Clusterware Installation :: Oracle Rac 11g Installation?
Sep 16, 2013
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies
ADVERTISEMENT
Jun 7, 2013
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
View 0 Replies
View Related
Aug 28, 2013
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
View 15 Replies
View Related
Jul 11, 2013
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies
View Related
Dec 3, 2012
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies
View Related
Oct 1, 2013
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
View 6 Replies
View Related
Dec 6, 2012
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies
View Related
Nov 17, 2013
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
View 0 Replies
View Related
Sep 24, 2012
I need some professional article about how to configure DNS for using Oracle GNS with explanation.
I want to understand the role of DNS server for GNS.
I tried to search but what I found is not enough or they are not written with accuracy.
View 2 Replies
View Related
Feb 28, 2013
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
View 6 Replies
View Related
Jul 9, 2012
I have been reading a lot of documentation regarding oracle services and I have an ok understanding of how they work. However, I have a general question regarding configuring services using Oracle RAC. For instance, if I have a 2 node oracle 11GR2 RAC on a Linux Redhat server. I have an application that connects to a service I have created. I create the service as follows.
srvctl add service -d ORCL_RAC -s APP_SERVICE -r ORCL_RAC1,ORCL_RAC2
The tnsnames contains:
APP_OLTP =
(DESCRIPTION =
(LOAD_BALANCE = ON)
(FAILOVER = ON)
[code]...
My questions are as follows:
1) When I do a 'srvctl status service -d ORCL_RAC', should I see the service running on both nodes of the RAC? Or does it run only one node, then it will fail over to the other when needed?
2) If I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 is only running on node1 and RAC_SRV2 is only running on node2. There are two applications sharing the same database, one application is using RAC_SRV1 and the other application is using RAC_SRV2. Am I correct in thinking that there is no failover available here? If node1 goes down, the application connecting to RAC_SRV1 will not be able to connect to node2 right?
3) In the case of the scenario in question 2 above, would it be best practise to simply create one service and have both applications connecting to the one service? Could I configure the one service to point connections from one application to node1 and connections from the other application to node2?
View 1 Replies
View Related
Mar 19, 2013
We are in process of upgrading 10g (RAC) database to 11g(RAC), does the oracle client software must also be upgraded to 11g or the 10g client can be used for 11g database connectivity, since there are thousands of end users it is very difficult to upgrade all the clients.What is the best approach for client software?
View 3 Replies
View Related
Jan 28, 2013
I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
INS-20802 Grid Infrastructure Failed
Cause:Plugin failed
View 4 Replies
View Related
Jun 14, 2012
install oracle clusterware on Windows Operating system
View 4 Replies
View Related
Feb 18, 2013
While adding new oracle 11g R2 rac node on solaris 10, getting below error.
Checking user equivalence...
PRVF-4007 : User equivalence check failed for user "grid"
Check failed on nodes:
sr3
[code]...
View 4 Replies
View Related
Sep 8, 2012
I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
View 2 Replies
View Related
Feb 7, 2013
I would like to know that when the private network in oracle rac down, which is the preferable node in the cluster (cluster of 2 nodes) to takeover the cluster.
Can I set/get the failover policy to point to one node in the cluster?
View 8 Replies
View Related
Nov 20, 2012
I want to install an active / passive Oracle Configuration for our new 11gR2 system. We do not want to go full blown RAC as yet. We already have an 11gR2 instance that I plan to CLONE to the production server(s).
So. detail the steps that I need to follow .
i.e.
configure the 2 servers (VIFs/Interconnects)
Install GRID/CRS
Clone over the database (do I do this as a SINGLE NODE RAC?)
View 11 Replies
View Related
Aug 22, 2012
After installing a 4 node cluster 11.2.0.3 with 16 CPU's (4 on each node) on IBM 795 with aix 6.1 each server is using 0.5 CPU with no user load on the system. Running SIHA on one server typically uses 0.05 CPU with no user load on the system.
View 5 Replies
View Related
Sep 12, 2012
OS=Redhat 5
Oracle=11gr2
Grid=11gR2
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.
View 1 Replies
View Related
Mar 18, 2013
In our current setup we have RAC on standard edition and client is now planning to go for Enterprise Edition but not yet decide because of cost. Is there any difference between Grid Infrastructure 11gR3 Enterprise edition and Standard Edition ?
They told me to first install Enterprise Edition and then will move to Standard Edition if they can't get the EE license so in that case do i have to re-install Grid infrastructure for standard edition?
View 6 Replies
View Related
Jan 22, 2013
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
View 2 Replies
View Related
Oct 17, 2013
We have 2 servers running Oracle 11gR2 Window server 2008 64 bit RAC. Today I add new shared disk visible from both servers. All our data placed on ASM partitions, but we need Windows volume for exchanging some data between servers & users;Actions:then i have prepare disk on shared storage from 1st node, run diskmfmt.msc & rescan disks when windows recognizes new hdd, initialize it.create an Extended partition & Logical drive & Assign drive letter. from another nodes, make sure no drive letter is assigned.
Sometimes Windows automatically assign drive letter. If drive letter is assigned, right click & Change drive letter & Remove. from 1st node, format this logical drive using ocfsFormat.exe after execute below scripts i have face some issues
E:app11.2.0gridcfs>ocfsformat /m P: /c 1024 /v DATA /f /d /aReg Get Cluster Name(): Reg Query ValueEx for CFS_CLUSTER_NAME failed with error 203
This indicates that the Cluster Name has not been configured on this node for OCFSThe volume formatted in this condition will be seen by all nodes running OCFS.
View 3 Replies
View Related
Dec 11, 2012
I am having 2 data centers within 1/2 km distance. And we kept each vote disk in once site. In case of site failure, the cluster needs a 3rd set. We don't have 3rd site.
Last open world, Oracle announced that oracle storage on cloud as announced. If I get the small space on the cloud, can i put my 3rd vote disk on the cloud?
View 1 Replies
View Related
Jun 13, 2012
I have a production database, the manager ask me to take the test Server to make an Oracle RAC with the Production Server.
Can I Install the RAC 11g R1 only in one Server (test server) ? and then include the Second Server (production)?
View 3 Replies
View Related
Mar 20, 2013
My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
View 3 Replies
View Related
May 6, 2013
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
View 10 Replies
View Related
Jul 9, 2012
Is it possible to upgrade GI 11.2.0.1 Enterprise Edition version to 11.2.0.3 STANDARD EDITION?
We have 2 Node RAC with 10.2 DB SE. Last time I think by mistake or not knowing the licensing information GI was upgraded to EE 11.2.0.1 by somebody or may be whatever version of GI is used, it has nothing to do with the license?
I have heard that I can upgrade Grid Infrastructure, but to Standard Edition. Does GI also comes with SE and also just want to know that can I perform this upgrade?
View 11 Replies
View Related
Jul 4, 2012
2 Node RAC Prod. GI= 11.2..0.1 , DB = 10.2.0.4 SE
I want to upgrade (out of place) Grid Infrastructure to latest version of 11.2.0.3 and then PSU on top of that.
GI HOME and DB HOME are separated. Database I want to upgrade later on, not with this clusterware upgrade. I have download p10404530_112030_Linux-x86-64_3of7.zip from MOS for upgrading GI.
grid@db1p [rec]: /home/grid > crsctl query crs softwareversion
Oracle Clusterware version on node [db1p] is [11.2.0.1.0]
grid@db1p [rec]: /home/grid > crsctl query crs activeversion
Oracle Clusterware active version on the cluster is [11.2.0.1.0]grid@db1px [ec]: /home/grid > sqlplus / as sysasm
[code]....
1) Is this the correct p10404530_112030_Linux-x86-64_3of7.zip to upgrade GI from 11.2.0.1 to 11.2.03?
2) Do I need a COMPLETE DOWNTIME to upgrade GI on 2 node RAC where DB is STANDARD EDITION but Clusterware is 11.2 as you have seen above..
3) Will this ASM version will also be upgraded along with GI upgrade installer or it must be upgrades separately after GI Upgrade?
View 4 Replies
View Related
Dec 27, 2012
When I use 'ONSCTL PING' to test the ons status, it says: configure localport and remoteport directives and attempt to start ONS server again.ons is not running.The content of D:app11.2.0gridopmnconfons.config is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The content of D:app11.2.0gridopmnconfons.config.rac2 is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The configuration file is almost the same in rac1.But the output of 'srvctl status nodeapps' is :
ons is enabled
ons is running on node1:rac1
ons is running on node2:rac2
View 2 Replies
View Related