RAC/ASM Clusterware Installation :: OEM Grid Control Files For Oracle Database 10gR2
Jan 22, 2013
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
I am running oracle linux 5.7 on VMware Workstation 9 and trying to install Grid 11gr2, during installation my system freezes and I see out of memory errors. Actually Java installer is eating up too much memory over 1gb. Is there a way ? I can limit memory usage by Java process to a certain extent ?
I have multiple oracle (10gR2) databases running on a linux (5.8) server. How can I check that for which of the databases has the OEM Database Control been configured and on what port is it listening?
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
when i install grid,the program stop at "loading setup dirver",this 's the log file.
Using paramFile: /u02/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 3431 MB Passed Checking swap space: must be greater than 150 MB. Actual 20479 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip: /u02/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.30.03/1/DataFiles/*.jar -d /tmp/OraInstall2013-05-30_07-35-51PM Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java, and the argv is /tmp/OraInstall2013-05-30_07-35-51PM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui/lib/linux64 -Doracle.installer.oui_loc=/tmp/OraInstall2013-05-30_07-35-51PM/oui
i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.
1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat, hc_+ASM1.dat, init.ora, orapw+ASM four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,
2) +DATA diskgroup has been created while grid installation, but when i try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup; name state DATA Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege.
3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1 then creat diskgroup.
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. CRS-4256: Updating the profile
I have a server with Red Hat EL 5.5 running an oracle database 10g R2 and an Oracle Agent 10.2.0.5The disk ran out of space and I realized that there are a lot of files stating with core.xxx such as :
-rw------- 1 gridagent oinstall 17M Aug 2 13:10 core.10348 -rw------- 1 gridagent oinstall 17M Aug 2 13:15 core.10827 -rw------- 1 gridagent oinstall 17M Aug 2 12:30 core.4129 -rw------- 1 gridagent oinstall 17M Aug 2 12:35 core.4772
What's that ?Why are those files generated at $AGENT_HOME/<HOST>_<SID>/sysman/log/ ?
There are more than 24 GB of those files
in nmc.log I can see lines such as: NMC-00000 2010-08-02 13:25:39 [11760, nmcdbg.c,0440]TRC: Debug context enabled. NMC-20020 2010-07-30 01:31:58 [23083, nmccole.c,0725]ERR: Could not collect using DSGA Collection method NMC-20014 2010-07-29 01:31:56 [11258, nmccole.c,0822]ERR: Could not attach to the SGA
There is a question come up in my mind that can we perform the copy/delete/move of ASM files to the host filesystem while the ASM instance is down. For instance... To copy the file ASM file through AMCMD utility when the ASM instance is running.
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node. Expected Value : n/a Actual Value : n/a List of errors: - Permissons of file "/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"] - Cause: Cause of Problem Not Available - Action: User Action Not Available.
I would like to use Oracle Grid Infrastructure to protect a single-instance database.
I found these docs:
[URL]
I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?
At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases
I try to install th a oracle 10gR2 database to a SuSe Linux 11.4.
I try to install to tha local machine, not to a remote host. But when I start the installation every time I get the next error message:
CODECan't connect to X11 window server using '' as the value of the DISPLAY variable.
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0 - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL Use the following command to view the current DISPLAY environment variable setting: echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server. To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost + To test that the DISPLAY environment variable is set correctly, run a X11 basedprogram that comes with the native operating system such as 'xclock': % <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance. Typical path for 'xclock': ''
I think that I don't need the x server when I install the product to the local machine. But every time I get this message.
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
While installing Oracle10gR2 on zlinux machine where the OS is SLES10 SP1 I got this error
In installActions2008-07-15_04-37-15PM.log
INFO: /usr/lib64/gcc/s390x-suse-linux/4.1.2/../../../../s390x-suse-linux/bin/ld: skipping incompatible /opt/oracle/10g/lib/stubs/libdl.so when searching for -ldl /usr/lib64/gcc/s390x-suse-linux/4.1.2/../../../../s390x-suse-linux/bin/ld: skipping incompatible /opt/oracle/10g/lib/stubs/libm.so when searching for -lm
Installed Grid Control 10.2.0.2.0 on Windows Server 2003R2 32-bit. Immediately upgraded to 10.2.0.5.0. Both install and upgrade went fine, Grid Control can see its own database in the list of targets, looks good.
I then installed Oracle 11gR2 11.2.0.1.0 64-bit on Windows Server 2008R2 64-bit and created a new database. I then installed the 10.2.0.5.0 agent manually on the server via OUI. Agent install went fine, secured and started properly.
The problems I'm having is Grid Control can't seem to see the database instance. If I go to "Targets", GC can see the host just fine, shows that its up and can see targets for the listener (Up), the agent at port 3872 (Up), and the database instance (Down). Drilling down to the database instance, it shows that the instance is not up (though it is as I can connect to it from a different machine and run queries against not) and the Agent Connection to Instance is down with the error: Failed to connect to database instance: (UNKNOWN OCI STATUS 1804) OCIInitialize. Check ORACLE_HOME and NLS settings etc...
Also, pulling up the "Alerts" tab for errors showed the following for Metrics "Access to Important Tables and Views", "DB Data Files Permissions", and "DB Control Files Permission":
Target: SR3 Type: Database Instance Metric: Access To Important Tables And Views Collection Timestamp: Jun 11, 2010 11:11:26 AM Error Type: Collection Failure Message: 1804 at c:oracleagent10g/sysman/admin/scripts/db/esaDbUtils.pl line 290. There are also several "Missing Properties : [AdrHome,ConvertFromCharset,needCharsetConvert]" errors listed too.
I've looked into the 1804 error and from what I could find, its a perl-related issue with not being able to get the ORACLE_HOME information.
- I verified that ORACLE_HOME was set in the environment variables and even rebooted to make sure it was being picked up properly. That didn't work. - I added "$ENV{ORACLE_HOME}='c:\oracle\product\11.2.0\dbhome';" to the esaDbUtils.pl file. That didn't work either. - I added the GC security certificate to the trusted certificates on the target box in case it was some kind of SSL issue. I don't get the annoying "invalid certificate" warning, but it didn't fix it.
I'm monitoring and all my databases using grid control. Recently I added a dataguard configuration but the standby database shows me a lot of error simple because it's in MOUNT state. how I should configure grid control or the standby database so the errors disappear?
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
GI 11.2.0 is installed...The installation of the database crashed in dbca.
When I tried to rerun, I got: PRCD-1121: Speciffied server pool RAC for RAC is already hosting an administrator-managed configuration for database(s) RAC
we need to take care of all the components in a RAC Database 11g rel 2 . what is the sequence of stopping RAC database ? databsae ?? ASM ??? listeners ??? cluster services ??? commands and also sequence to start / stop ...and to check status of each components
I successfully installed clusterwares in 2 nodes but when i installled Oracle 11g Rel 2 (11.2.0.1) RAC database in Oracle linux 5.4 64bit, all the prerequisites are failed. I dont understand why all the prerequisties are failed,
Both nodes are working fine, i used all basics command to check the clusters, but why the database installation prerequisties are failed.
