While installing Oracle10gR2 on zlinux machine where the OS is SLES10 SP1 I got this error
In installActions2008-07-15_04-37-15PM.log
INFO: /usr/lib64/gcc/s390x-suse-linux/4.1.2/../../../../s390x-suse-linux/bin/ld: skipping incompatible /opt/oracle/10g/lib/stubs/libdl.so when searching for -ldl
/usr/lib64/gcc/s390x-suse-linux/4.1.2/../../../../s390x-suse-linux/bin/ld: skipping incompatible /opt/oracle/10g/lib/stubs/libm.so when searching for -lm
I try to install th a oracle 10gR2 database to a SuSe Linux 11.4.
I try to install to tha local machine, not to a remote host. But when I start the installation every time I get the next error message:
CODECan't connect to X11 window server using '' as the value of the DISPLAY variable.
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0 - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL Use the following command to view the current DISPLAY environment variable setting: echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server. To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost + To test that the DISPLAY environment variable is set correctly, run a X11 basedprogram that comes with the native operating system such as 'xclock': % <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance. Typical path for 'xclock': ''
I think that I don't need the x server when I install the product to the local machine. But every time I get this message.
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
i am reinstalling oracel 11g in my window 7 64 bit machine after i uninstalled it. however, i got an issue that is environment variable path failed in the installation process. this didn't happen when i firstly successfully installed oracle.
I am getting error while installing Oracle 11g on windows xp. Ora --12638: Credential Retrieval failed error. I understand that some people have got that error after the installation( Changing SQL.Net file).
Did i make the right steps? Can i go on now? I don't know if what I did was correct and ok and that I should already consider that package as installed.
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y Copying dbhome to /usr/local/bin ... The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y Copying oraenv to /usr/local/bin ... The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created Finished running generic part of root.sh script. Now product-specific root actions will be performed.
2012-12-11 17:31:03: Parsing the host name 2012-12-11 17:31:03: Checking for super user privileges 2012-12-11 17:31:03: User has super user privileges Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params Improper Oracle Clusterware configuration found on this host Deconfigure the existing cluster configuration before starting [code]....
CRS-4000: Command Start failed, or completed with errors.
I successfully installed clusterwares in 2 nodes but when i installled Oracle 11g Rel 2 (11.2.0.1) RAC database in Oracle linux 5.4 64bit, all the prerequisites are failed. I dont understand why all the prerequisties are failed,
Both nodes are working fine, i used all basics command to check the clusters, but why the database installation prerequisties are failed.
I have to manage an active passive cluster on SLES10 SP4. Oracle 10.2.0.4. All oracle binaries are on a DRBD Device on mountpoint /oradata. This mountpoint includes the binaries and all datafiles.
I havent installed these systems. At one stage on node died and got reinstalled by a system administrator. After a switch from the running node to the standby node, the cluster is not starting.
Jan 3 14:36:01 a logger: Cluster Ready Services waiting on dependencies. Diagnostics in /tmp/crsctl.6114. Jan 3 14:36:14 a logger: Waiting for Oracle CSS service to be available before starting Jan 3 14:36:14 a logger: ASM instance +ASM. Wait 2.
After issuing $ORACLE_HOME/bin/localconfig add the cluster is starting, the asm instance is coming up, and also the database instance is starting.
Shortly after that the db instance dies. Alert log is showing something like recursive sql error. Looks like writing to the datafiles is not working. In asmcmd the diskgroups are showing DISMOUNTED (show MOUNTED before)
so what to do ? a) Why is it necessary to issue "localconfig add" to make the cluster starting ? b) What could be a reason for not being able to write to the database ? c) How to install an active/passive cluster ? c1) Install OS on both nodes c2) Install oracle binaries c2.1) on both nodes in the local files system and do the mapping to the drbd afterwards? c2.2) only on one node and just switch the mountpoint ?
I've experienced an error while installing the Application Management Pack 3 on Linux Machine (OS: Oracle Enterprise Linux 5.3 32-bit) with EM Grid Control 10g Release 5. I want to install the Grid Control Plug-in Oracle E-Business Suite Management Pack 3 to manage our EBS Oracle Apps R12, but it was failed due to error. Below was the logs for error:
Log: /u01/app/oraInventory/logs/installActions2010-07-06_03-00-11PM.log RepManager was not able to run successfully. /applications/em/em/WEB-INF/lib/myjar.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emCfg.jar:/u01/a pp/oracle/OracleHomes/oms10g/jlib/ojmisc.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emUpgrade.jar :/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emagentSDK.jar oracle.apps.oms_extn.util.EBSOUIUtil RepMa
At the end of my installation I received the following error message:
Sep 11, 2010 4:20:49 PM oracle.sysman.emcp.EMConfig perform SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849] Refer to the log file at /u01/app/oracle/cfgtoollogs/dbca/orcl/emConfig.log for more details. Sep 11, 2010 4:20:49 PM oracle.sysman.emcp.EMConfig perform [code]....
I found a thread that reported a similar issue and was directed to Oracle Support Document 353843.1 . The suggestion was to adjust the /etc/hosts file, but I don't see anything wrong in the file:
[oracle@jhlinux etc]$ cat hosts # Do not remove the following line, or various programs # that require network functionality will fail. # ::1 localhost6.localdomain6 127.0.0.1 localhost.localdomain localhost 192.168.1.254 jhlinux.home.com jhlinux
We are trying to set up a RAC blade server in which they are 2nodes and runs under Linux x86-64 machine. We will be installing 11.2.0.3. The ASM disk has been created and we are in stage of installtion of GRID software. During the GUI installation we are getting below error.
INS-06003: Failed to setup passwordless SSH connectivity with the following
The SSH are working fine when we do manually. But through GUI during installtion it is not. The port which we are using here for connectivity is 2222 instead of the default ports. As per the one of thread in OTN discussion I checked port specification of /etc/ssh/ssh_config file in both the servers. It is 2222.
I am trying to apply 14275572 this patch on our local database
DB : ORC it's on 11g (11.2.0.3.0) OS : Redhat 5 (x86_64).
14275605 applied succesfully but 14275572 applying this patch getting below errors.
[Jan 5, 2013 7:37:36 PM] --------------------- Prerequisite for apply --------------------- [Jan 5, 2013 7:37:36 PM] Running prerequisite checks... [Jan 5, 2013 7:37:36 PM] Patch "14275572" is ignored as it is not a "Fusion Applications patch". [Jan 5, 2013 7:37:36 PM] Check if patch "14275572" is a no-op patch. [Jan 5, 2013 7:37:36 PM] None of the selected patches are no-op. patches.. [code]...
This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.OPatch failed with error code 39.
RAC installation on vmware is failing with following errors. I followed below link for installation. URL..... Found the following errors:
[root@rac2 ~]# cd /crs/oracle/bin/ [root@rac2 bin]# ./vipca PRKR-1062 : Failed to find configuration for node rac1 PRKR-1062 : Failed to find configuration for node rac1 [code]....
The "/crs/oracle/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.The "/crs/ oracle/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
[root@rac2 bin]# /crs/oracle/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200 [root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect PRIF-10: failed to initialize the cluster registry [root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect PRIF-10: failed to initialize the cluster registry
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. CRS-4256: Updating the profile
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
want to download full oracle 10gR2 documentation. I also navigated on [URL] but this link allowing me to download pdf one by one but I want to download all pdf's in single shot.
I want to create the .psp(pl/sql ser pages) reports in the oracle database 10gr2.but i am unable to do it why because it needs http server(knew by going through some of the oracle docs but not able to understand) where i find this first of all details configuration needed for the .psp files.
I have multiple oracle (10gR2) databases running on a linux (5.8) server. How can I check that for which of the databases has the OEM Database Control been configured and on what port is it listening?
Which is the best method for migration of database from Oracle 9iR2,10gR2 to 11gR2.
Current Environment Server1 Operating System: Sun OS 5.10 Oracle Database: Oracle Database Enterprise Edition 9.2.0.8 (32 bit) Average Db Size: 600Gb RAc Configuration: No Server2 Operating System: Sun OS 5.10 Oracle Database: Oracle Database Enterprise Edition 10.2.0.3 (64 bit) Average Db Size: 600Gb RAC Configuration: No
Proposed Environment Server1 and Server2 Operating System: Sun Solaris 10 Oracle Database: Oracle Database Enterprise Edition 11.2.0.3 (64 bit) RAC Configuration: No Hardware is New : Yes
I am migrating an oracle 10g to 11gR2. i am a bit confused. The developers in my work place have a tablespace for storing table and a different tablespace for storing indexes.
For the migration i am using exp and imp. My question is how i am going to migrate the indexes from 10g to 11gR2?
Question: to migrate from oracle 10gR2 in Windows to oracle 11gR2 in Linux . Steps are:
1. need to expdp all schemas/users from oracle 10gR2 in Windows, 2. then impdp each schema/user into oracle 10gR2 in Linux first, 3. then upgrade the oracle 10gR2 in Linux to oracle 11gR2 in Linux ? 4. Do I need to pre-create all the same tablespaces first in oracle 10gR2 in Linux ?
Is it correct ? or I can migrate straight all schemas/users from oracle 10gR2 in Windows to oracle 11gR2 in Linux using impdp ?
I'm trying to download Oracle RDBMS 10.2.0.5 for Windows Server 2008 R2. But i don't see it on OTN or edelivery....i can't find any link...Have i to request a SR on metalink?
My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I have installed Oracle 10gR2 database server recently in the Windows box. The database works fine. But I am unable to connect through the Internet Explorer. I found that the service for the isqlplus is not available. Do I need to run any script for creating the service?
