Installation :: 10gr2 On 32 Bit RHEL 5 OS
Aug 1, 2012
I am trying to install 10gr2 on a 32 bit RHEL 5 OS. One of the packages that's need to be installed is elfutils-libelf-devel-0 according to metalink.
Now, when I try to install it i get the following error:
error: Failed dependencies:
elfutils-libelf-devel-static-i386 = 0.137-3.el5 is needed by elfutils-libelf-devel-0.137-3.el5.i386
Now i tried to install the said dependency and i got this error:
error: Failed dependencies:
elfutils-libelf-devel-i386 = 0.137-3.el5 is needed by elfutils-libelf-devel-static-0.137-3.el5.i386
I saw a somehow similar solution in
[URL].........
I have to install both the packages in the same rpm command according to the link and i got the following:
[root@MCISMACAMDB Server]# rpm -ivh elfutils-libelf-devel-0.137-3.el5.i386.rpm elfutils-libelf-devel-static-0.137-3.el5.i386.rpm
warning: elfutils-libelf-devel-0.137-3.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 37017186
Preparing... ########################################### [100%]
1:elfutils-libelf-devel-s########################################### [ 50%]
2:elfutils-libelf-devel ########################################### [100%]
The ..static package didn't seem to have installed completely. I tried checking if elfutils-libelf-devel-i386 = 0.137-3.el5 was really installed:
[root@MCISMACAMDB Server]# rpm -q elfutils-libelf-devel-0.137-3.el5.i386.rpm
package elfutils-libelf-devel-0.137-3.el5.i386.rpm is not installed
So i tried installing it again then the system prompted that it is already installed:
[root@MCISMACAMDB Server]# rpm -ivh elfutils-libelf-devel-0.137-3.el5.i386.rpm
warning: elfutils-libelf-devel-0.137-3.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 37017186
Preparing... ########################################### [100%]
package elfutils-libelf-devel-0.137-3.el5.i386 is already installed
Did i make the right steps? Can i go on now? I don't know if what I did was correct and ok and that I should already consider that package as installed.
View 3 Replies
ADVERTISEMENT
Aug 30, 2012
Is Oracle Database 11g Release 2 (11.2.0.2.0) compatible on Red hat enterprise linux 5 update 7 ( RHEL 5.7 ) ?
View 5 Replies
View Related
Jul 8, 2011
I try to install th a oracle 10gR2 database to a SuSe Linux 11.4.
I try to install to tha local machine, not to a remote host. But when I start the installation every time I get the next error message:
CODECan't connect to X11 window server using '' as the value of the DISPLAY variable.
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server. To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 basedprogram that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance. Typical path for 'xclock': ''
I think that I don't need the x server when I install the product to the local machine. But every time I get this message.
View 6 Replies
View Related
Jul 15, 2008
While installing Oracle10gR2 on zlinux machine where the OS is SLES10 SP1 I got this error
In installActions2008-07-15_04-37-15PM.log
INFO: /usr/lib64/gcc/s390x-suse-linux/4.1.2/../../../../s390x-suse-linux/bin/ld: skipping incompatible /opt/oracle/10g/lib/stubs/libdl.so when searching for -ldl
/usr/lib64/gcc/s390x-suse-linux/4.1.2/../../../../s390x-suse-linux/bin/ld: skipping incompatible /opt/oracle/10g/lib/stubs/libm.so when searching for -lm
[Code]....
View 1 Replies
View Related
Jul 10, 2012
I need to download Oracle 10g R2 for windows7 64bit processor. send the link
View 4 Replies
View Related
Jan 22, 2013
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
View 2 Replies
View Related
May 6, 2013
where i can get oracle 10gr2 64bit download for windows 7 64bit?
View 2 Replies
View Related
Sep 1, 2010
I work as a Sys. Admin. for several RHEL 3.8 servers, most of them are clusters of 2 machines. All these servers are running Oracle 9.2.0.7 database. They are running fine on a separate filesystem. So everytime the system has to be formatted for some particular reason, there is no need to re-install the database.
I am trying to make some tests by running the same filesystem containing the oracle database in a fresh Red Hat Enterprise Linux 4.8 X86_64 Install. This task has become impossible, and I'm not quite sure why.
I installed all the compat- packages required for a fresh oracle 9 install in a RHEL4 machine, but at the time of stating the STARTUP sentence, it gives me the next error:
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
CMCLI ERROR: OpenCommPort: connect failed with error 2.
After this error (repeated) it says something like: Cannot start an already running database.... But if i stat a shutdown sentence, it says that the instance has not been initialized....
I don't know whether i have to re-install all the oracle software in order to make a clean install in the new kernel version or not, i tried to apply a patch, and the oracle installer recognized the installation i had.
I think it might be because the original system is configured to work as a cluster, and i'm running it on only a virtual machine.
View 6 Replies
View Related
Nov 13, 2012
oracle 11g.2 rac with asm RHEL 5
ora.gsd
OFFLINE OFFLINE ccbs01
OFFLINE OFFLINE ccbs02
why it's offline , what this means , what the useuage of this? did have any affect on database availability? the below it's from OEM
[Critical] ABSNL Cluster Resource State State Change
ora.gsd has instances in OFFLINE State Nov 12, 2012 12:15:03 PM
[Warning] ABSNL Cluster Resource State State Change
ora.abs.db has instances in OFFLINE State Nov 12, 2012 12:15:03 PM
View 5 Replies
View Related
Jul 11, 2012
we are running Oracle database 11.2.0.3 on RHEL 6.1.
Should we join the above machine to an existing Windows 2003 (Active Directory) Domain? or Configure it as a standalone Server?.
View 9 Replies
View Related
Apr 16, 2011
I am trying to install Oracle 10g RAC clusterware on RHEL-ES-4 using vmware. everything works properly till the time root.sh on second node.
I am getting the below error.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
After googling this topic, I found I have to check this first below
This particular case is caused by the OS init system does not working.
" Failure at final check of Oracle CRS stack.10" means CRS daemon did not startup during 600 seconds period.In the root.sh script, it adds CRS related entry in /etc/inittab, run "init q" and expect 3 CRS related daemon processes to start, eg:
init.cssd
init.crsd
init.evmd
With init system problem, none of these daemon processes are spawned, this causes CRS process startup failure as they rely on the CRS daemon processes to start first.
This can be verified by adding a simple entry in /etc/inittab:
test:2:once:/usr/bin/echo "HELLO TEST" > /tmp/test.log
run "init q" as root user. If the init is working, then there should be a file /tmp/test.log generated.
According to above I am not able to generate this file.
View 8 Replies
View Related
Nov 12, 2012
We have a scenario where Oracle Database R1 is installed on Windows System and the Client is present on Linux. Both the system is on same network. We can access Windows -2-Windows using TNS entry.
I am unable to connect to this scenario where Database is on Windows and Client is on Linux.
View 8 Replies
View Related
May 1, 2010
Is it possible to install 10gr2 in windows 7?
View 12 Replies
View Related
Oct 26, 2012
Why is knowing the backup policy important before starting any upgrade.
View 17 Replies
View Related
Dec 2, 2011
I would like to have some inputs on RMAN backup that we are planning to perform for the database that has to be now discarded; and which may have have to be restored in distant future.
Current Env--
DB Ver: 10gR2
OS: Solaris
Backup mode: RMAN WITHOUT CATALOG(i.e. using controlfile for storing rman info)
From what I know(I might be wrong), that for duplicating the 10gR2 DB to another machine we have to have the target(original) database running and connected. In my case we need to take the rman backup and then use the target db for fresh installation and hence the db will be deleted.
View 2 Replies
View Related
Nov 3, 2010
want to download full oracle 10gR2 documentation. I also navigated on [URL] but this link allowing me to download pdf one by one but I want to download all pdf's in single shot.
View 2 Replies
View Related
Feb 6, 2013
I want to create the .psp(pl/sql ser pages) reports in the oracle database 10gr2.but i am unable to do it why because it needs http server(knew by going through some of the oracle docs but not able to understand) where i find this first of all details configuration needed for the .psp files.
View 8 Replies
View Related
Apr 14, 2010
At my current organization there are two instances are running one is at 8i and another one is 10g. I want to migrate all the data from 8i to 10g. I have already taken the export from 8i with the below command:-
exp file=<<PATH>> full=y logfile=<<PATH>> compress=y
Now I want to import it to 10g DB. Can I do the import with that below command?
imp file=<<PATH>> full=y logfile=<<PATH>> ignore=y compile=y
View 3 Replies
View Related
Jul 24, 2013
I have multiple oracle (10gR2) databases running on a linux (5.8) server. How can I check that for which of the databases has the OEM Database Control been configured and on what port is it listening?
View 7 Replies
View Related
Aug 3, 2012
upgrading a single instance 10.2.0.2 database of approx size 2TB to 11.2.0.3 rac 2 node db on linux.
View 3 Replies
View Related
Oct 1, 2013
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
View 6 Replies
View Related
Mar 20, 2013
My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
View 3 Replies
View Related
Jun 7, 2013
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
View 0 Replies
View Related
Dec 6, 2012
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies
View Related
Apr 22, 2013
Which is the best method for migration of database from Oracle 9iR2,10gR2 to 11gR2.
Current Environment
Server1
Operating System: Sun OS 5.10
Oracle Database: Oracle Database Enterprise Edition 9.2.0.8 (32 bit)
Average Db Size: 600Gb
RAc Configuration: No
Server2
Operating System: Sun OS 5.10
Oracle Database: Oracle Database Enterprise Edition 10.2.0.3 (64 bit)
Average Db Size: 600Gb
RAC Configuration: No
Proposed Environment
Server1 and Server2
Operating System: Sun Solaris 10
Oracle Database: Oracle Database Enterprise Edition 11.2.0.3 (64 bit)
RAC Configuration: No
Hardware is New : Yes
View 2 Replies
View Related
Oct 7, 2010
I have been studying possible ways to calculate the best size for the stripe size on my new storage. From what I have seen it appears that there is no straight answer but I believe there must be good way of estimating it. I am deploying a new storage that uses 16 x 600GB 15k RPM 6Gbps SAS drives, it is supposed to be very fast but I think if I get the stripe size on the RAID10 array right I should be able to get even more out of it. I am running oracle 10.2.0.4.0 (10gR2) on 64bit Linux with 32GB of RAM, the SGA is set to 20GB.
What I read said that the "stripe size must be at least as large as the I/O size." The I/O size is calculated from DB_BLOCK_SIZE * DB_ FILE_ MULTIBLOCK_ READ_COUNT, which is my case is "db_block_size = 16k * db_file_multiblock_read_count = 16 = 256k." The current RAID10 array that I am using which will be decommissioned soon has a stripe size of 128k, and if I understood it all correctly it is undersized for my Oracle instance.
With an I/O size of 256k the smallest stripe that I should choose is 256k but how do I know what is the best combination of db_file_ multiblock_ read_ count and db_block_size?
We are planning to create new table space with a block size of 32k as this has been recommended by a number of DBAs but with "db_block_size = 32k * db_file_multiblock_read_count = 16 = 512k".
Is this a viable size? Do you think this will actually improve performance on my system? Note that this database gets about 1500 insertions per second and peaks around 3000 insertions per second, it is a mixture of OLTP and data warehousing.
After doing a lot of research I came across an article by "Don Burleson" which says that starting in Oracle 10gR2 the "Oracle recommends not setting the db_file_multiblock_read_count parameter, allowing Oracle to empirically determine the optimal setting." References: URLs.....
View 5 Replies
View Related
Mar 7, 2011
I have a database running on 10205 version. It is a RAC database with ASM storage.
I want to migrate this database to other server and upgrade this database to 11202 version .
View 1 Replies
View Related
Feb 10, 2010
We are planning to migrate the forms application from windows to linux.
View 1 Replies
View Related
Jun 23, 2010
I am migrating an oracle 10g to 11gR2. i am a bit confused. The developers in my work place have a tablespace for storing table and a different tablespace for storing indexes.
For the migration i am using exp and imp. My question is how i am going to migrate the indexes from 10g to 11gR2?
OS; solaris sparc 10
Oracle 10g: 10.2.0.1.0
oracle 11g: 11.2.0.1.0
View 1 Replies
View Related
Jun 30, 2011
How can i use this below example in forms builder 10gr2
var oput_cur refcursor
var tabname varchar2(30)
exec :tab_name := 'dual';
begin
open :oput_cur for 'select * from ' || :tabname;
end;
/
print oput_cur
how can i get the values from oput_cur into forms grids(containing text items).
View 11 Replies
View Related
