I am setting a RAC on vmware follow:URL....And i have a problem in the last step when Installing Clusterware Software. Oracle Cluster Verification Utility failed. The problem is:
OCR itegrity found invalid for nodes: RAC2
OCR itegrity found valid for nodes: RAC1
I am trying to install Oracle 10g RAC clusterware on RHEL-ES-4 using vmware. everything works properly till the time root.sh on second node.
I am getting the below error.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
After googling this topic, I found I have to check this first below
This particular case is caused by the OS init system does not working.
" Failure at final check of Oracle CRS stack.10" means CRS daemon did not startup during 600 seconds period.In the root.sh script, it adds CRS related entry in /etc/inittab, run "init q" and expect 3 CRS related daemon processes to start, eg:
init.cssd
init.crsd
init.evmd
With init system problem, none of these daemon processes are spawned, this causes CRS process startup failure as they rely on the CRS daemon processes to start first.
This can be verified by adding a simple entry in /etc/inittab:
test:2:once:/usr/bin/echo "HELLO TEST" > /tmp/test.log
run "init q" as root user. If the init is working, then there should be a file /tmp/test.log generated.
According to above I am not able to generate this file.
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
I am installing RAC on my Laptop using VM ware workstation . I have created two linux machines on VM ware with 1 gb merory on each machine . I installed 10.2.0.1 clusterware successfully but when i am installing 10.2.0.1 database binaries my machine reboot every time .
View 3 Replies View Relatedi want to install oracle real application cluster using shared file system and not using ASM. we are not creating LUN for our data to kept and SAN admin will give us NFS share where we will place the database.
View 5 Replies View RelatedToday, I've got an error:
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Nov 17 09:45:50 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
idle> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/DOISOAT/spfileDOISOAT.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/DOISOAT/spfileDOISOAT.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
idle> exit
SP2-0042: unknown command "exit" - rest of line ignored.
idle> exit
Disconnected
First time, I tried to recreate spfile from pfile, however, it - the errors continued to occur. And I searched in metalink, so, I've got ID 387217.1. I've been beging followed:
1- Check the REQUIRED_RESOURCES was listed by crs_stat -p command, wasn't it? Then, the REQUIRED_RESOURCES did not contain anything
2- Modify by Metalink comment solution:
srvctl modify instance -d <database name> -i <instance name> -s <ASM instance name>
Everything is done, however, I still did not startup database instance. The above error continued, and I force to stop all by crs_stop -all.
I got following error on Oracle 10.2.0.4.0 RAC on solaris 10
Oracle clsomon failed with fatal status 12.
Oracle CRS failure. Rebooting for cluster integrity.
I think this problem in 11g but I am using 10g.
when running the root.sh on second node the following error occured
adding daemons to inittab
expecting the crs daemons to be up within 600 seconds
failure at final check of oracle CRS stack. 10.
i am configuring asm on clusterware when i create instance on node1 and node 2 a message screen appear " Cant start asm instance on node 2)When i start asm instance manually on node 2 i found the below error in alert log file.
ORA-27508 IPC error sending a message
ORA-27300 OS system dependent operation:send msg failed with status: 101
ORA-27301 OS failure message: Network is unreachable
ORA-27302 failure occurred at: sskgxpsnd1
My application consists of Oracle RAC and Oracle Enterprise Manage (OEM) on same two nodes. I am exploring the idea of utilizing Oracle Clusterware (which is already installed with Oracle RAC) to support OEM in active passive mode.
Here is the scenario.
Node A running Solaris 10.9 on SPARC and Node B running Solaris 10.9 on SPARC.
Node A and Node B are both Oracle RAC Nodes ( Active Active ) which use Shared Storage for Oracle using ASM.
Node A and Node B will run Oracle Enterprise Manager (OEM) Application in active passive scenario which will be using Oracle RAC for its database. So, both Oracle RAC and OEM are sharing same server A and B for its clusters.
Now, OEM application need a third party clusterware to fail it over. It needs clusterware to provide floating VIP and shared folder of the size of 20GB which will keep software libraries. If node A goes down, node B have access to same libraries and will come up as active.
Do you know if oracle clusterware which comes with Oracle RAC can support OEM for failing over i.e. it can provide floating VIP and shared file system?
While installing oracle 9i on windows XP. Oracle database configuration agent fails.
And it throws following error message.
java.lang.NoClassDefFoundError: oracle/sysman/emSDK/common/nls/MessageBundle
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.loadAllInitParams(Compiled Code)
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.initialize(InitParamAttributes.java:313)
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.<init>(InitParamAttributes.java:255)
[code]........
i download oracle 11g for windows 32 bit on my laptop, go through the installation and use the option to crate a starter database. meet all the pre- req and every thing goes smooth. database gets created, use sqlplus to connect ot the database also open the enterprise manager and and also see the GUI after logging in.
now what happens it works fine for a day or some times two and when i reboot the machine and go back and try to open the EM its gives me the error cant find the URL. i have tried it few times and it happens every time. i don't know what i am doing it wrong but for some reason the EM manager doesn't work . i can still log on the database using the sqlplus.
I wish to purchased a new DELL laptop with windows 7. I was told that oracle 10g installation is a problem in windows 7 and is not compatible with windows 7. i was even told that formweb.cfg file also does not work properly.
Is this true. should i have to install windows XP instead of windows 7. some how i am not able to accept this point. I need to buy around 15 laptops for all my officers and it will be a waste if i can't install oracle 10g
I need to install the new Oracle Grid on a new virtual machine. Currently the new Grid VM server has a different name and IP. After it is setup and tested it will eventually take the place of the old production server using its original IP and name. If I install the new Grid now on this new VM with different name and IP address would I have to reinstall the agents on each of the target database servers?
View 1 Replies View RelatedI have tried to install oracle 10g on my Windows XP. But during the installation I have got these errors:
"Enterprise manager configuration failed due to the following error. Error instanting EM configuration files. Refer to the log file U:\...\orcl6\emConfig.log for more details"
"VTA-1000 : The browser could not be launched with the file or
URL :%EM_UPLOAD_PORT%/em"
I trying to backup my database using RMAN for the first time.
using this command
RUN
{
DELETE NOPROMPT OBSOLETE;
CROSSCHECK BACKUP;
CROSSCHECK ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP;
[Code] ......
i get this error message while running it.
Starting backup at 05-JAN-12
channel C1: starting datafile copy
input datafile fno=00004 name=/CDS/data/CDSC01.dbf
channel C2: starting datafile copy
input datafile fno=00002 name=/CDS/rbsg/undo_01.dbf
channel C3: starting datafile copy
[Code]...
I have created a materialized view log on table testing_mview_rev in 11g:
SQL> CREATE MATERIALIZED VIEW LOG ON testing_mview_rev WITH ROWID;
Materialized view log created.
And a MV on it in 10g:
SQL> create materialized view testing_mview_1_rev REFRESH Force start with (sysdate) next (sysdate+1/1440) with rowid as select * from testing_mview_rev@S58_TO_S56;
Materialized view created.
Now this is suppose to automatically refresh itself every minute but refresh is failing. However manual refresh is working fine.
what I have missed here. is there any other way to schedule the MV to run every minute?
I have a scenario wherein two columns compute a third one. i.e. quantity and unit_price computes "functional_amount". the column "functional amount" property disabled is set to true but there are a number of validations performed on it. Now when on a certain event "form_trigger_failure" is to be fired. the validation trigger fires multiple times (may be...).
the error alert that i have devised, is shown multiple times along with the message "validation at disabled item "functional amount" failed !". both of these messages follow one after the other unless i close the applet.
here is the error faced when installing oracle 11gR2,
ERROR:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/.colorls9rT/OraInstall2013-09-12_03-59-57PM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
[code]...
I am trying to install Oracle 10g Developer suite on windows 7 but the system gives the following error. (file attached). I have successfully installed Oracle 10g Database.
View 6 Replies View RelatedI already have 9i installed at my desktop.I tried to install oracle 10g version 1. But it got struck with "oracle database configurations assistant" on configuration assistants window.Then I did the below.
1) I clicked stop, but still didn't get stop.
2) And also the window didn't enable the 'Retro' button
I am having problem in installing 9i on vista I installed forms 6i successfully but when installing 9i database it is not installing properly.
View 3 Replies View Related When i try to install Oracle forms ver.11g(newest version), after several seconds I have this error: "INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install." I have already installed Weblogic 12c (also newest version) - it works fine, but how can I upgrade it to 10.3.5.0 ?? (I really have to ? It won't work with Weblogic 12c?)
I installed oracle database 10g on my laptop, it installed successfully. I see sql plus in my program, how will i get login details for my database?
View 6 Replies View Relatedam trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)
FRM-92101...There was a failure in the Forms Server during startup. this could happen due to invalid configuration. Look into the web-server for the details.
Details...
Java Exception:
Oracle.forms.net.ConnectionException:Forms Session<74> failed during startup: no response from runtime process
at oracle.forms.net.HTTPNStream.getResponse(unknown source)
at oracle.forms.net.HTTPNStream.doFlust(unknown source)
[code]....
I have two machines with oracle 11g . Both having ODP 11.2 Beta. I've to communicate between these two machines using Oracle Advanced queuing. The message sent from one machine will reach the second machine only if the Firewall of both machine is OFF.But based on requirement, we cannot switch OFF firewall or add exceptions as ports or applications.
View 1 Replies View RelatedI am setting up a conversion server for upgrading an application database to a later version - the database is hosted on 11g but the vendor provided ETL tool only supports the Oracle 10g client. Is there a specific order so the install will work on the initial install. I'm installing Oracle 11g R1 (11.1 no patches) and 10g (10.1.0.4 after patching) 32Bit on a WIN2K3 SP2 Server. I've done this install before but have had to play with the path order to get it to work.
View 2 Replies View RelatedI already succeded to setyup Oracle 10 G on my machine , when trying to connect by system/system it does not connect.The listener is OK and instance ok.
View 10 Replies View Relatedtips to install the ORACLE 10g,developer 2000 in Windows 7 64 bit.
View 3 Replies View Related
