I am facing an issue while rebuilding a DR (Physical Standby) site using RMAN.Rman is failing to restore all the datafiles to the stanby site.
There are 403 datafiles that should be restored among which after restoring 50-60 datafiles the channel is abruptly getting terminated.Please note this exercise is not new I have done this many times (once a year after a DR testing) and the same script is being used.The rcv file is as follows
/u03/oracle/admin/mpr/scripts/dataguard/configure_dr.rcv connect auxiliary sys/XXXX@YYY run { duplicate target database for standby nofilenamecheck dorecover; } exit CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; configure_dr.rcv: END [code]....
The trace file says "krso_proc_add: Detected dead process 13828326; subsuming V$MANAGED_STANDBY slot INFO: krsr_rfs_atc: RFS processes are temporarily disallowed"
I have also started RMAN debug tracing and the trace is also scanned as it is huge.I have seen the following in the trace error 3015 signalled during compilation..I do not find any specific oracle error to check on .
The only change that happened is that the Primary production server has been moved to a new datacentre and after its move all the connections seems to be working fine.
I have run a standby clone that terminated with error due to few missing LV-s. I removed all LV-s for the clone, recreated them including the missing ones. I ran the clone again,but it skips the files that were successfuly duplicated in the previous clone request that failed. I need to be able to start the clone all over again, but RMAN does persistantly skip duplicating the datafiles that were successfuly processed in the first atempt.
How to ignore the RESUME option so that the clone process would start from the beginning? Where does RMAN keep the info about the successfuly duplicated datafiles in clone standby process? I have tried few RMAN tables , but no luck.
multiple disk failure, the database was open at the time.We have managed to recover the data from the disk and have put it on another disk.We have got a new server with oracle 9 running.
A blank database has been created.I have copied the control files and redo files onto the new server and left the datafiles , (.dbf,.ora) on a seperate external disk F drive (this is because the original database resided on F drive)I can mount the database , however when I try to open it I get the following
ORACLE instance started.
Total System Global Area 135338868 bytes Fixed Size 453492 bytes Variable Size 109051904 bytes Database Buffers 25165824 bytes Redo Buffers 667648 bytes Database mounted. ORA-01122: database file 1 failed verification check ORA-01110: data file 1: 'F:ORACLEORADATALCMPROSYSTEM01.DBF' ORA-01207: file is more recent than controlfile - old controlfile
I have a database for which I use RMAN for backup & recovery. The database is in archivelog mode. Online redo log files are multiplexed and I have more than one destinations for archive logs. If, due to a disk crash, all data files and redo log files are gone - and I have archive logs, one member of each redo log group and a full database backup available, I can recover till the last archived log. But I want to ask that what about the transactions which were not archived at the time of media failure? How can I recover committed transactions which were not archived at the time of crash, and I have a mirrored copy of log group which was current at the time of failure?
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands: run { set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')"; allocate auxiliary channel ch1 type disk; duplicate target database to testdb; } exit
Is there a way on how to let RMAN use the latest backup pieces instead?
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26 BR0505I Full database backup (level 0) using RMAN successful BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Is this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS; configure device type disk parallelism 1 backup type to compressed backupset;
run { allocate channel d1 type disk ; backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ; sql 'alter system archive log current' ; backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: AMTMXPRD (DBID=534215973) connected to recovery catalog database
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba mankp_acressit.bat D:>rman catalog rman/******@acressit target / cmd file=E:sgdba mankp_arch.rcv log E:sgdba mansit_arch_rman_backup.log RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00556: could not open CMDFILE "E:sgdba mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in: //192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod Instance created -- I created the relevant folder hierarchy under <ORACLE_BASE> directory -- Then, I created the relevant directories for Oracle Database, as follows: --a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK - INCR_MTDPROD_20110621_480_7.BAK And only see these two files: - C-2169285856-20110527-03 - C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run { allocate channel c1 type disk maxpiecesize=4G; CROSSCHECK archivelog all; backup incremental level 0 format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run { allocate channel c1 type disk maxpiecesize=4G; CROSSCHECK archivelog all; backup incremental level 1 cumulative format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_ %d_%T_%s_%p.bak'
Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?
A.Configure backup optimization
B.Configure the channel to increase MAXOPENFILES
C.Configure the channel to increase the capacity with the RATE parameter
D.Configure the channel to adjust the tape buffer size with the BLKSIZE option
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
run { CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F'; CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS; sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
I am trying to practice some RMAN configuration settings.Version 11.2.0.1OS - Linux X86-64 What i wanted to validate is if there is no level 0 backup of database taken, then the level 1 backup will be automatically backing up all the blocks of the database(similar to full backup). RMAN> report schema; Report of database schema for database with db_unique_name DB101 List of Permanent Datafiles
I am not sure what these input bytes are which is not matching with the database size(posted in the beginning of thread)? why it has to show as db full when i actually run a incremental?
