We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: AMTMXPRD (DBID=534215973) connected to recovery catalog database
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in: //192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod Instance created -- I created the relevant folder hierarchy under <ORACLE_BASE> directory -- Then, I created the relevant directories for Oracle Database, as follows: --a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK - INCR_MTDPROD_20110621_480_7.BAK And only see these two files: - C-2169285856-20110527-03 - C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run { allocate channel c1 type disk maxpiecesize=4G; CROSSCHECK archivelog all; backup incremental level 0 format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run { allocate channel c1 type disk maxpiecesize=4G; CROSSCHECK archivelog all; backup incremental level 1 cumulative format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_ %d_%T_%s_%p.bak'
run { CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F'; CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS; sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I'm encountering the following 2 different errors from RMAN:
Prior to OS restart: RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00601: fatal error in recovery manager RMAN-03004: fatal error during execution of command RMAN-10039: error encountered while polling for RPC completion on channel t1 RMAN-10006: error running SQL statement: select act from x$ksusex where sid=:1 and serial=:2 RMAN-10002: ORACLE error: ORA-03113: end-of-file on communication channel [code]...
diagnose what actually occurred during RMAN backup?
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
Database version : 11.1.0.7 Applications R12 (12.1.3) Operating system : Redhat linux 5.5
I would like to know how to create recovery catalog database to acheive rman backups as control file will not keep backup info longer. This is for our production database what are the requirements before doing so and what happens to configure retension policy to recovery window.
Initially plan of taking backup to disk and later moving backups to tape device
On production environment i am running Oracle 10g (10.2.0.4) on windows server 2003. and take full compress backup through rman .
I have create a new machine from scratch OS (windows 2003 server) Database Oracle 10g R2 (10.2.0.4) same architecture as live,
Can i standup a instance with the backup i have taken from my live database. And if yes .......how can i ......means i want to take backup from live and restore it on new created machine
Performing backups on the physical standby via RMAN. We need to restore our test database, and right now it is equivalent to the production. The DUPLICATE command seemed the best bet. We have controlfile and SPFile both on Auto-backup, and the RMAN on a six day retention with weekly 0 level backups and nightly level 1 cumulative backups.
However, when I run the DUPLICATE it chokes being unable to find a current controlfile nor one in backup, even though we have six days worth of supposedly good (validated) backups. We are not using a catalog, rather the DB controlfile.
The solution to this error is reopen the database and try again. however, the physical standby cannot be opened. It is the standby. What if we move the last backup to the primary database, "register" it there, and try this DUPLICATE?
I have seen nothing on this in my searches, and the Oracle documentation does not address this, though it recommends backup from the Physical Standby.
We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
On production server i have the production database and i have another instance for recovery catalog database.and on DR server i have only one instance for production database .In the scenario of recovery,
- i did export for recovery catalog user - i have latest rman backup for production database
On the DR server as i mention up , i have only on instance , my question is , i need to create another instance for recovery catalog user to import it ? or on the same target database on DR i can import the recovery catalog ?
i am trying to restore database using rman backup on same machine using command
RMAN> run { 2> set until sequence 23; 3> restore database; 4> recover database; 5> } but it will give me error. RMAN-00571: ======================================================= RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =========== RMAN-00571: ======================================================= RMAN-03002: failure of restore command at 03/31/2011 19:18:11 [code]....
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands: run { set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')"; allocate auxiliary channel ch1 type disk; duplicate target database to testdb; } exit
Is there a way on how to let RMAN use the latest backup pieces instead?
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26 BR0505I Full database backup (level 0) using RMAN successful BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Is this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS; configure device type disk parallelism 1 backup type to compressed backupset;
run { allocate channel d1 type disk ; backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ; sql 'alter system archive log current' ; backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29 ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are: CONFIGURE RETENTION POLICY TO REDUNDANCY 2; CONFIGURE BACKUP OPTIMIZATION ON; CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; [code].....
get the following error when i do this, RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45 ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba mankp_acressit.bat D:>rman catalog rman/******@acressit target / cmd file=E:sgdba mankp_arch.rcv log E:sgdba mansit_arch_rman_backup.log RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00556: could not open CMDFILE "E:sgdba mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?
A.Configure backup optimization
B.Configure the channel to increase MAXOPENFILES
C.Configure the channel to increase the capacity with the RATE parameter
D.Configure the channel to adjust the tape buffer size with the BLKSIZE option
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.