Does the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
I configured recovery catalog and started Full online backup using EMC Networker. In EMC Networker I set three months policy to keep Backup.I didn't change redundancy.
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
My question is, if I need to restore Backup of last 15 days then I can ?.
online backup done thru RMAN.Suppose i am taking online backup of full database. During the backup, user's are inserting/deleting/modifying data. This data is getting stored as online archives. Once the database backup is finished, how these archives are applied to the database to make the database up to date.
View 1 Replies View RelatedI am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
How can i create an oline back up of database using RMAN?
View 1 Replies View Related,I am new to Oracle database administration i am working on a 24*7 tool .the tool will work as a non stop.this is a standalone tool.there wont be any one who will be taking care of the database.I need to design a backup statergyNeed to take backups on timly basis.Since the database can't be go offline cold backup's can not be useenhot backup needs to implemented.what are steps needs to do for hot backup.Is there are some pre defined scripts to run the backup.
View 6 Replies View RelatedEnvironment:
oracle 10.2.0.1.0
Windows XP
I have taken the RMAN Full database backup through the following command.My database is in no archivelog mode.
AT RMAN prompt
Shutdown immediate;
Startup mount;
run
{
allocate channel c01 device type disk format 'd:
man_bkp est_%U';
allocate channel c02 device type disk format 'd:
man_bkp est_%U';
backup full database tag 'full_bkup_test_081111';
backup current controlfile;
backup spfile;
release channel c01;
release channel c02;
}
Now i have deleted my all controlfile and spfile/Pfile from the database.So how can i recover my SPfile and controlfile? i do not have autobackup on of SPfile/Controlfile.
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
Difference between cold backup and cold cloning?
View 2 Replies View RelatedI am trying to practice some RMAN configuration settings.Version 11.2.0.1OS - Linux X86-64 What i wanted to validate is if there is no level 0 backup of database taken, then the level 1 backup will be automatically backing up all the blocks of the database(similar to full backup). RMAN> report schema; Report of database schema for database with db_unique_name DB101 List of Permanent Datafiles
File Size(MB) Tablespace RB segs Datafile Name----1 300 SYSTEM +DATA/db101/datafile/system.257.8208254172 200 SYSAUX *** +DATA/ db101/ datafile/sysaux.268.8208254253 820 UNDOTBS1 *** +DATA/db101/datafile/undotbs1.261.8208254294 5000 TPCCTAB *** +DATA/ db101/ datafile/tpcctab.266.820832485 List of Temporary Files=File Size(MB) Tablespace Maxsize(MB) Tempfile Name---- 1 200..
[code]....
I am not sure what these input bytes are which is not matching with the database size(posted in the beginning of thread)? why it has to show as db full when i actually run a incremental?
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies View RelatedSQL> SELECT * FROM V$VERSION;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
after i backup my database,i check the alert log ,i found the following errror:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
[code]....
the trace number 26967 :
[oracle@shenzhengair archivelog]$ cat /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
/u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
[code]....
what does the error mean?
I am using the following query to determine if my rman backup succeeded for failed. I look for "COMPLETED WITH ERRORS"
col input_type format a10
col bck_hrs format 99.9 heading "Run|Time"
col status format a21
col end_dt format a20 heading "End|Time"
col mbytes_per_sec format 9,999 heading "Output|Rate|MB/sec"
[code]...
output
======
End Run Output Rate
INPUT_TYPE STATUS Time Time Size GB MB/sec
---------- --------------------- -------------------- ----- ---------- ------
ARCHIVELOG COMPLETED 2011-12-24 06:03:54 .5 189.4 106
DB INCR COMPLETED 2011-12-24 05:33:05 9.3 3,392.6 103
ARCHIVELOG COMPLETED 2011-12-23 10:12:27 .2 73.3 105
I know that the DB INCR is an INCR 0 backup but is there some way query I can join with my example above to tell me this is INCR 0 or FULL BKUP?
I was thinking maybe setting "COMMAND_ID" some text like INCR 0 or INCR 1 or FULL BKUP. Does that sound feasible
my restore scenario bellow.
I have hot full backup that processed by NetBackup Policy. the backup policy are;
1.Full backup database in Monday. Daily_Monday_RMAN <- 1 volume pool=1 media
2.Full backup database in Tuesday .Daily_Tuesday_RMAN <- 1 volume pool=1 media
3.Full backup database in Wednesday. Daily_Wednesday_RMAN <- 1 volume pool=1 media
4.Full backup database in Thursday. Daily_Thursday_RMAN <- 1 volume pool=1 media
5.Full backup database in Friday. Daily_Friday_RMAN <- 1 volume pool=1 media
6.Full backup database in Saturday. Daily_Saturday_RMAN <- 1 volume pool=1 media
How to restore database from one of medias?
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
URL....I'm practicing for the OCP test and one of the questions is that there is a backup from yesterday and the last archived logs are from the day before yesterday not mentioned if it's cold or hot backup.
If its a cold backup - cant we recover it? is it a must to have the archived redo logs also when recovering a cold backup? That sounds not logical since those logs are made only for a hot backup. URL.....
I am using oracle 11.2.0.3.0, i have taken database backup using rman , after backup i have added a new datafile . My database has been crash , can i restore the database including the new data file which does not include in backup . I have all the archive logs.
View 6 Replies View RelatedWe are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedIs this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
Would like to check how do we check the current value for limit channel in rman backup..
eg set limit channel d1 kbytes 2024800;
We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database
[code]....
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?
A.Configure backup optimization
B.Configure the channel to increase MAXOPENFILES
C.Configure the channel to increase the capacity with the RATE parameter
D.Configure the channel to adjust the tape buffer size with the BLKSIZE option
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View RelatedHow can be identify a particular archive-log file have backup or not from rman catalog?
View 2 Replies View Related