Recovery Manager (RMAN) :: Online Backup Scripts For Oracle 11g On Windows?
Jul 25, 2013
,I am new to Oracle database administration i am working on a 24*7 tool .the tool will work as a non stop.this is a standalone tool.there wont be any one who will be taking care of the database.I need to design a backup statergyNeed to take backups on timly basis.Since the database can't be go offline cold backup's can not be useenhot backup needs to implemented.what are steps needs to do for hot backup.Is there are some pre defined scripts to run the backup.
View 6 Replies
ADVERTISEMENT
Jan 8, 2013
Does the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
View 2 Replies
View Related
Dec 23, 2011
How can i create an oline back up of database using RMAN?
View 1 Replies
View Related
Nov 27, 2012
I configured recovery catalog and started Full online backup using EMC Networker. In EMC Networker I set three months policy to keep Backup.I didn't change redundancy.
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
My question is, if I need to restore Backup of last 15 days then I can ?.
View 4 Replies
View Related
Feb 11, 2011
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
View 11 Replies
View Related
Jun 25, 2013
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
View 7 Replies
View Related
Sep 30, 2012
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
View 6 Replies
View Related
May 2, 2013
Is this possible to recover a schema using RMAN bckup
View 5 Replies
View Related
May 3, 2011
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
View 2 Replies
View Related
Jun 26, 2012
My automated RMAN backup plan.
ShutdownDB1.bat
set oracle_sid = pldg
C:oracleproduct10.2.0insqlplus.exe /nolog @c:oraclebackupshutdowndb2.sql
ShutdownDB2.sql (called by the previous batch file)
set echo on
spool C:oraclebackupShutdownDB.log
connect /@pledgemaker as sysdba
shutdown immediate
spool off
exit
<Here there will be a thirty minute window or so while I XCOPY the Oracle Inventory and Oracle Home directories.>
RMANBackup1.bat
set oracle_sid=pldg
C:oracleproduct10.2.0BIN
man.exe target / cmdfile = 'c:oraclebackup
manbackup2.scr'
log = 'c:oraclebackupRMANBackup.log'
RMANBackup2.scr (called by the previous batch file)
startup mount
backup database
alter database open
exit
View 15 Replies
View Related
Jan 20, 2013
I have seen in many RMAN backup scripts that a manual log switching is performed in first line of the script? What is it purpose, just to write changes needed to reconstruct the DML/DDL statements to online redo logfiles and start the archiving process if db is running in archive log mode?
View 2 Replies
View Related
Aug 27, 2012
I am using Oracle 11.2.0.3 RAC (2 nodes) + ASM on AIX 7.1
I am backing up my Oracle database through RMAN to ASM disk groups..I have a requirement to backup also to an OS file systems. So what I did that I mounted an NFS across the 2 nodes of my RAC database.I am running backup from node 2 only.My issue now is that I am facing a real performance issue when backing up to NFS.My question is there any way to take an RMAN backup to local file system on node 2? or in other way what are the options to take RMAN backups to an OS file system?
I tried to copy from ASM to OS file system but i was advised to backup to file system using the format command.what should i do in such case? since I am facing performance issue to backup to NFS.
View 8 Replies
View Related
Mar 27, 2013
I took backup of Datafiles , archivelog files and controlfile through RMAN. Now, i want 3 backup file will created as a output of RMAN operation. It would be :
1 backupfile for all the datafiles
1 backupfile for all the archivelog files
1 backupfile for controlfile.
It have to be regardlessly whatevr my DB size is. It it possible to do so. How i can can write rman script to accomplish the task.
View 7 Replies
View Related
Jan 22, 2013
During the last week, we faced many network issues that prevent our RMAN files to be copied completely. Backup team offer a temporary solution that we have to generate only one backup file to be transferred from source to destination (tape).
View 5 Replies
View Related
Nov 12, 2012
I need to now how can i create a new database from the RMAN Full Backup , is it possible or not? and if possible how?
View 8 Replies
View Related
Sep 18, 2013
Can't start the Database and can't backup What is happening now. My database connection is not stable so can't do the backup.I spent two days trying unsuccessfully.
check the following print screen : [test@localhost ~]$ xhost +access control disabled, clients can connect from any host[test@localhost ~]$ [test@localhost ~]$ [test@localhost ~]$ su - rootPassword: [root@localhost ~]# [root@localhost ~]# [root@localhost ~]# su - oracle[oracle@localhost ~]$ [oracle@localhost ~]$ export ORACLE_SID=db11gr2[oracle@localhost ~]$ [oracle@localhost ~]$ echo $ORACLE_HOME/u01/app/oracle/product/11.2.0/db_1[oracle@localhost ~]$
[code]....
View 13 Replies
View Related
Sep 10, 2012
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
View 2 Replies
View Related
Sep 4, 2013
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
View 6 Replies
View Related
Nov 29, 2012
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
View 5 Replies
View Related
Jan 3, 2013
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code].....
get the following error when i do this,
RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45
ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
View 1 Replies
View Related
Nov 13, 2013
Any procedure which we can initiate an incremental backup without Level 0 backup.
View 9 Replies
View Related
Oct 16, 2012
I'm trying to write a bat file for the rman backups that can be used for any of our databases. I'm passing variables into the bat file and that is working fine (i.e. oracle_sid, drive letter, oracle_home), my problem is when the rman actually runs and calls the ctl file, the variables aren't being passed thru to that file.
View 3 Replies
View Related
Oct 23, 2012
I'm using database 11g & restore backup from another location.
RMAN> RESTORE CONTROLFILE FROM '/u01/RMAN/forstandby_0acekubq_1_1';
RMAN> catalog start with '/u01/RMAN/';
RMAN> restore database;
channel ORA_DISK_1: reading from backup piece /u01/RMAN/forstandby_09ceku8r_1_1
channel ORA_DISK_1: ORA-19870: error while restoring backup piece /u01/RMAN/forstandby_09ceku8r_1_1
ORA-19599: block number 782 is corrupt in backup piece /u01/RMAN/forstandby_09ceku8r_1_1
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/23/2012 19:24:11
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
View 1 Replies
View Related
Jan 29, 2011
online backup done thru RMAN.Suppose i am taking online backup of full database. During the backup, user's are inserting/deleting/modifying data. This data is getting stored as online archives. Once the database backup is finished, how these archives are applied to the database to make the database up to date.
View 1 Replies
View Related
May 2, 2011
I have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log
Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
View 6 Replies
View Related
Jul 31, 2012
I have the RMAN full database backup of oracle 10g (10.2.0.3) on Sun Solaris OS which i want to restore on oracle 11g (11.2.0.3) on Linux OS. The backup pieces was transferred to oracle 11g server manually in binary mode.
-rwxrwxr-x 1 mepc dba 36356096 Jul 16 14:49 snapcf_MEPC.f
-rwxrwxr-x 1 mepc dba 166028800 Jul 16 15:29 MEPC_full_backup_MEPC_nnnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 169567744 Jul 16 15:29 MEPC_full_backup_MEPC_nmnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 164813824 Jul 16 15:39 MEPC_full_backup_MEPC_nonbkn9f_1_1
-rwxrwxr-x 1 mepc dba 144025600 Jul 16 16:06 MEPC_full_backup_MEPC_nqnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 168576512 Jul 16 16:09 MEPC_full_backup_MEPC_npnbkn9f_1_1
-rwxrwxr-x 1 mepc dba 168649216 Jul 16 17:33 MEPC_full_backup_MEPC_o5nbkpvv_1_1
[code]....
the backup is taken in above format. I know the ORACLE_SID and dbid of the database from which the backup has been taken. whenever i tried the following command
mepc@tcstctmatson:/mepc_backup/May22fullbkp$ rman target /
Recovery Manager: Release 11.2.0.3.0 - Production on Tue Jul 31 12:14:54 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: MEPC (DBID=1595278680)
RMAN> shutdown;
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started) Oracle instance started
Total System Global Area 1071333376 bytes
Fixed Size 1349732 bytes
Variable Size 620758940 bytes
Database Buffers 444596224 bytes
Redo Buffers 4628480 bytes
[code]....
the file is not corrupted as i checked the checksum on both the servers and it is same.how can i restore the RMAN oracle 10g backup in Oracle 11g.
View 5 Replies
View Related
May 23, 2012
what is %N determines in Oracle RMAN HOT Backup. In some documentation it says it gives you backup with respect to tablespace. Is it a version specific ..bcos when tried in above version it failed....
View 4 Replies
View Related
Apr 11, 2013
I'm trying to backup database to a specific folder but it's failing:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/11/2013 22:41:59
ORA-19502: write error on file "/home/backup/rmanbackup/bak_11_1_812500536_test", block number 3520128 (block size=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: 4
Additional information: 3520128
Additional information: 274432
command for backup is following:
backup database format '/home/backup/rmanbackup/bak_%s_%p_%t_test';
View 5 Replies
View Related
May 21, 2012
I installed 11g on linux rhel 5.2 by manually. now databse is ok . But some Schema HR , Scott , Oe are not come. but database fully work. ok.
Now i am trying to connect Rman.
export ORACLE_SID=ORCL
rman target /
then I have a error that SYS.DBMS_BACKUP_RESTORE is not found.
but sql> desc sys.dbms_backup_restore package is available.
which script are run to solve it , because only catalog.sql and cataproc.sql script are run in installing of oracle 11g manually instalation.
View 3 Replies
View Related
Aug 29, 2012
the rman backup script for weekly full backup and daily incremental backups with configure commands for oracle 11g database.
View 10 Replies
View Related
