the rman backup script for weekly full backup and daily incremental backups with configure commands for oracle 11g database.
View 10 Replies
Any procedure which we can initiate an incremental backup without Level 0 backup.
View 9 Replies View RelatedOracle 10gR2 on 64-bit RHEL.Backup Strategy:There will be a level-0 backup of the database every Sunday and level-1 every weekday.Archivelogs will be backed up up every 30 minutes.
Q: How can I delete ALL the archivelog backups that were taken that day (every 30 minutes) right after successful completion of level-0 or level-1 backup?
I want to delete them because they may not be of any use after the level-0 or level-1 backup (am I right)?
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
"If no level 0 backup is available, then the behavior depends upon the compatibility mode setting. If compatibility is >=10.0.0, RMAN copies all blocks changed since the file was created, and stores the results as a level 1 backup. In other words, the SCN at the time the incremental backup is taken is the file creation SCN. If compatibility <10.0.0, RMAN generates a level 0 backup of the file contents at the time of the backup, to be consistent with the behavior in previous releases."
So yes, that's it. Even in the Oracle 11g OCP course and exam, the information given is for Oracle 9 (pre 10g). Seems like a major functional regression.
------------------------------------------------------------------------------------------------------------------------------------------------
Original problem.
Am I not understanding something about rman????
Using oracle 10g standard edition and rman.
No existing backups.
When I run repeated level 1 cumulative incrementals, the appear to back up everything (like a level 0 would).
My understanding is that if a level 1 is run w/o an existing level 0 backup, it will generate a level 0 backup.
All subsequent level 1 backups should be level 1's as expected.
If I explicitly generate an level 0, followed by level 1's it all works as expected.
I am determining what got backed up by the size of the resulting save sets.
Do I have to do an explicit level 0 and then explicit level 1's? I thought not.
We just purchased NAS (Raid5) unit to manage our data storage. I am planning to create a virtual partition on this nas device and use one partition for oracle data storage and another virtual partition will be used by other data (files and may be sqlserver data files....etc..)
We will have oracle installed on seperate oracle server. Can we use RMAN to manage incremental backups in this environment? May main worry point is that our data storage device will have many different type of datas and will we be able to tell RMAN to make backups only from certain virtual drives?
I have a RUN file within a script to duplicate a database. As part of this RUN file I also run the command configure controlfile autobackup off; as part of this RUN file. However, this command has turned off backup of the control file on the AUXILLARY database (i.e. production) as well as the TARGET database (test). Is this supposed to happen?
My run file is:
rman TARGET sys/XXXX@${DB}-SOURCE AUXILIARY /
RUN {
allocate AUXILIARY channel a1 type disk;
allocate AUXILIARY channel a2 type disk;
allocate AUXILIARY channel a3 type disk;
allocate AUXILIARY channel a4 type disk;
[Code]....
Here we have a dataguard environment with db1 as primary and db2 as physical standby database. We configured dataguard in 10g environments and we are not using grid control. What are the steps for configuring rman for incremental backups in this environment?
We want to schedule the backups to be taken in standby db, (that is applicable in case of switchover too). In the case of switchover to db2 what all do we need to do in rman manually to resume backups in db1?
Environment:
oracle 10.2.0.1.0
Windows XP
I have taken the RMAN Full database backup through the following command.My database is in no archivelog mode.
AT RMAN prompt
Shutdown immediate;
Startup mount;
run
{
allocate channel c01 device type disk format 'd:
man_bkp est_%U';
allocate channel c02 device type disk format 'd:
man_bkp est_%U';
backup full database tag 'full_bkup_test_081111';
backup current controlfile;
backup spfile;
release channel c01;
release channel c02;
}
Now i have deleted my all controlfile and spfile/Pfile from the database.So how can i recover my SPfile and controlfile? i do not have autobackup on of SPfile/Controlfile.
I am using RMAN with a recovery catalog option on a separate Database. My question is
When we use catalog does RMAN keep the information in Control file of the Target Database as well or only in recovery catalog? I am asking this in case We lost the database which contains the recovery catalog what to do?
Can the target database and the recovery catalog database be the same?
View 5 Replies View RelatedMy scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
what could be the reason that following 2 (RMAN) commands return different results?
RMAN> list archivelog all completed before 'sysdate-2';
RMAN> list archivelog until time 'SYSDATE-2';
Can I register a database say MYDB in datacenter1 with two different catalogs i.e., I have one rman catalog a datacenter1 location and another rman catalog in datacenter2 location. So, can I register MYDB to rman catalogs at datacenter1 and datacenter2. If, so how can we keep rman catalogs at datacenter1 and datacenter2 in sync. For MYDB rman backups I just want to use local rman catalog which is datacenter1. But I just want to keep a redundant copy of the rman catalog.
View 8 Replies View RelatedI need to now how can i create a new database from the RMAN Full Backup , is it possible or not? and if possible how?
View 8 Replies View Related RMAN> register database; RMAN-00571:
===========================================================RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============RMAN-00571: ===========================================================RMAN-03002: failure of register command at 08/15/2013 19:48:59RMAN-03014: implicit resync of recovery catalog failedRMAN-03009: failure of full resync command on default channel at 08/15/2013 19:48:59ORA-01580: error creating control backup file +ORALIN_RECO/snapcf_oralin.fORA-
[code][....
Can't start the Database and can't backup What is happening now. My database connection is not stable so can't do the backup.I spent two days trying unsuccessfully.
check the following print screen : [test@localhost ~]$ xhost +access control disabled, clients can connect from any host[test@localhost ~]$ [test@localhost ~]$ [test@localhost ~]$ su - rootPassword: [root@localhost ~]# [root@localhost ~]# [root@localhost ~]# su - oracle[oracle@localhost ~]$ [oracle@localhost ~]$ export ORACLE_SID=db11gr2[oracle@localhost ~]$ [oracle@localhost ~]$ echo $ORACLE_HOME/u01/app/oracle/product/11.2.0/db_1[oracle@localhost ~]$
[code]....
RMAN is not removing obsolete backups and now the backup directory is nearly full.Retention policy is 1, however, there are backups more than 6 weeks old still in the backup directory.crosscheck and delete obsolete commands run every night, and I have also run these manually, yet the backup files still remain.It is like RMAN is not aware of their existance.How can I confirm that RMAN does not need them and therefore delete them manually using OS commands.
View 17 Replies View RelatedI have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
I like to duplicate the database DATABASEA to DATABASEB and need to be run in same server. I tried to bounce the listener & databaseb instance multiple times but no lucky.
Step 1 : The instance DATABASEB is in Nomount stage
Step 2 :
==> tnsping DATABASEB
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-SEP-2012 07:36:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = client )(PORT = 1521)) (CONNECT_DATA = ( SERVER = DEDICATED) (SERVICE_NAME = DATABASEB)(UR=A)))
OK (10 msec)
Step 3 :
==> rman target sys/*****@DATABASEA auxiliary sys/********@DATABASEB
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 11 07:37:50 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DATABASEA (DBID=1723462779)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
[code]...
How to restore database if rman catalog corrupted and we we dont have bacup of catalog db ..all the backup info are stored in catalog db for prod databases.
View 7 Replies View RelatedI have a live server on which Oracle 10g Database is running. We take full RMAN Backups everyday. Now we want to restore the RMAN Backup file from the Live server to another machine (which is going to be a test system). I want to restore the latest RMAN backup on the test machine (which is not on network).
When I copy the RMAN backup set in the flash recovery area of the test machine and then use "list backup", the backup set is not listed. I also tried "crosscheck backup" and then "list backup" but still the backup set does not appear. how can I register the backup set from live server into test machine and then restore it.
I have a problem in running delete obsolete or report obsolete using rman. Although the retention policy is set to "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 60 DAYS;", when running delete obsolete or report obsolete it deletes or returns all the backupsets till sysdate. What should I do to solve this issue?
View 8 Replies View Relatedis it possible to have a vss snapshot backup on the top of an RMAN backup. Because the link [URL] says that we can have an incremental level 1 backup on the vss snapshot backup.
So I need to know if interoperability between RMAN and VSS exists or not.
Also is it possible to have mixed backups meaning vss snapshot backups and rman backups. Whenever we take snapshot backup, is it updated in the control file?
I am trying to learn about RMAN Incrementally Updated Backups. I created a database on Server A with the parameters and configurations as shown in image attached. I would like to restore full database on Server B (Test DB).The Server B is exactly same in directory structure as the Server A
e.g. ('E:archive','E:incr_backup'). I would like to automate this process so that it updates the Server B on daily basis for R&D purpose.
I have four Oracle 8i databases that can not be removed because of client requirements. These 8i databases have there own RMAN catalog which is 10G (Originally there were Oracle 8i, 9i and 10g databases using it but are now moved to 11g catalog). Databases are backing up fine. However, all the other databases are using the RMAN 11g Catalog. I want to point the Oracle 8i databases to point to the RMAN 11g recovery catalog. I created an 8i schema, however, i'm getting the following error message: RMAN-06429: RCVCAT database is not compatible with this version of RMAN. however, I wanted to put the question out there to see if there are any work arounds.
View 3 Replies View RelatedI am trying to restore 11gr2 database to point in time. using following steps:
Control files are fine, that are not restored.
RMAN> run
{
set until time "to_time('2012-12-13 12:12:00','YYYY-MM-DD HH24:MI:SS')";
}
RMAN> restore database;
RMAN> recover database;
RMAN> alter database open;
Here my problem is it is restore complete data what ever i was having, but i don't was it, i has to restore up to specified time only.
I have oracle 11.2.0.3.0 in Windows 2008 server R2 64 bit version. I have installed database ASMDB with ASM ... Now i have another one machine , I want to clone my database in that machine with Non ASM file system .. Can any one tell me step by step document to do it ?
Can i keep the database name as ASMDB in another Machine ?
Can the control file be used to store scripts which are used to perform backups? I know the RMAN recovery catalog can.
Does the SHOW command display detailed reporting on the RMAN catalog contents other than configuration information?
,I am new to Oracle database administration i am working on a 24*7 tool .the tool will work as a non stop.this is a standalone tool.there wont be any one who will be taking care of the database.I need to design a backup statergyNeed to take backups on timly basis.Since the database can't be go offline cold backup's can not be useenhot backup needs to implemented.what are steps needs to do for hot backup.Is there are some pre defined scripts to run the backup.
View 6 Replies View Related
