Recovery Manager (RMAN) :: 06429 - RCVCAT Database Not Compatible With Version?

Sep 7, 2012

I have four Oracle 8i databases that can not be removed because of client requirements. These 8i databases have there own RMAN catalog which is 10G (Originally there were Oracle 8i, 9i and 10g databases using it but are now moved to 11g catalog). Databases are backing up fine. However, all the other databases are using the RMAN 11g Catalog. I want to point the Oracle 8i databases to point to the RMAN 11g recovery catalog. I created an 8i schema, however, i'm getting the following error message: RMAN-06429: RCVCAT database is not compatible with this version of RMAN. however, I wanted to put the question out there to see if there are any work arounds.

View 3 Replies


ADVERTISEMENT

Recovery Manager (RMAN) :: Duplicate Restoring Older Version Of File Than Expected?

Feb 28, 2013

We are running 11.2.0.3.2.

In my catalog for the "source" database (rman target db), I have the backupsets for a full database backup ended at Feb. 7, 03:43:37. These are online backups. So, there are archived redo logs being generated while it runs and the following archived redo logs finished at Feb. 7, 04:00:24.

We duplicate databases all the time. So, this is not a new concept for us. The one thing that has changed is that we now back up to disk (using the flashback recovery area) and then later on, initiate a backup to tape. Prior to this go-live, we did all of our backups directly to tape. The catalog does not seem confused. It knows it needs to go to tape because it's beyond the retention for disk backups. The only problem is that it is going to the backup prior to the backupset I want, only for a couple of files.

In the past, when all went directly to tape, we would do a set until time 'Feb. 7, 03:43:37' and it would automatically restore the backupset that finished then and apply archived redo logs as necessary to make a consistent copy. Now, if I use the same model, it's going to a backup set from the prior date for 3 particular files. If I change the time to when the archived redo logs ended their backup, 04:00, it still goes back to the day before, but only for 2 files.

I can list a backup of each specific file and see that the file is in the backupset for which I expect RMAN to pull. How can I figure out a date/time to go back to if not using the method of reviewing the catalog entries and timestamps?

View 4 Replies View Related

Recovery Manager (RMAN) :: Recovery Catalog Option On Separate Database

Jun 7, 2013

I am using RMAN with a recovery catalog option on a separate Database. My question is

When we use catalog does RMAN keep the information in Control file of the Target Database as well or only in recovery catalog? I am asking this in case We lost the database which contains the recovery catalog what to do?

View 4 Replies View Related

Recovery Manager (RMAN) :: Can Target And Recovery Catalog Database Be Same

Sep 23, 2012

Can the target database and the recovery catalog database be the same?

View 5 Replies View Related

Windows :: Oracle Database Compatible Version With Win 7

May 10, 2012

I have Windows 7 (System Type - 64-bit OPerating System & ACPI X64 PC Type) and want to install Oracle Database.

The compatible version with the above operating system and send me the direct link for downloading.

View 17 Replies View Related

Recovery Manager (RMAN) :: Register A Database With Two Different Catalogs?

Dec 13, 2012

Can I register a database say MYDB in datacenter1 with two different catalogs i.e., I have one rman catalog a datacenter1 location and another rman catalog in datacenter2 location. So, can I register MYDB to rman catalogs at datacenter1 and datacenter2. If, so how can we keep rman catalogs at datacenter1 and datacenter2 in sync. For MYDB rman backups I just want to use local rman catalog which is datacenter1. But I just want to keep a redundant copy of the rman catalog.

View 8 Replies View Related

Recovery Manager (RMAN) :: How To Create Database From Backup

Nov 12, 2012

I need to now how can i create a new database from the RMAN Full Backup , is it possible or not? and if possible how?

View 8 Replies View Related

Recovery Manager (RMAN) :: Unable To Register Database?

Aug 15, 2013

 RMAN> register database; RMAN-00571:

===========================================================RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============RMAN-00571: ===========================================================RMAN-03002: failure of register command at 08/15/2013 19:48:59RMAN-03014: implicit resync of recovery catalog failedRMAN-03009: failure of full resync command on default channel at 08/15/2013 19:48:59ORA-01580: error creating control backup file +ORALIN_RECO/snapcf_oralin.fORA-
[code][....

View 2 Replies View Related

Recovery Manager (RMAN) :: Can't Start Database And Backup?

Sep 18, 2013

Can't start the Database and can't backup What is happening now. My database connection is not stable so can't do the backup.I spent two days trying unsuccessfully.

check the following print screen : [test@localhost ~]$ xhost +access control disabled, clients can connect from any host[test@localhost ~]$ [test@localhost ~]$ [test@localhost ~]$ su - rootPassword: [root@localhost ~]# [root@localhost ~]# [root@localhost ~]# su - oracle[oracle@localhost ~]$ [oracle@localhost ~]$ export ORACLE_SID=db11gr2[oracle@localhost ~]$ [oracle@localhost ~]$ echo $ORACLE_HOME/u01/app/oracle/product/11.2.0/db_1[oracle@localhost ~]$

[code]....

View 13 Replies View Related

Recovery Manager (RMAN) :: Restoring A Backup To A New Database Instance

Sep 4, 2013

I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.

(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)

 I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.

View 6 Replies View Related

Recovery Manager (RMAN) :: Perform Active Database Duplication?

Sep 11, 2012

I like to duplicate the database DATABASEA to DATABASEB and need to be run in same server. I tried to bounce the listener & databaseb instance multiple times but no lucky.

Step 1 : The instance DATABASEB is in Nomount stage

Step 2 :

==> tnsping DATABASEB
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-SEP-2012 07:36:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.

Used parameter files:

Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = client )(PORT = 1521)) (CONNECT_DATA = ( SERVER = DEDICATED) (SERVICE_NAME = DATABASEB)(UR=A)))
OK (10 msec)

Step 3 :

==> rman target sys/*****@DATABASEA auxiliary sys/********@DATABASEB
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 11 07:37:50 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DATABASEA (DBID=1723462779)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============

[code]...

View 9 Replies View Related

Recovery Manager (RMAN) :: How To Restore Database If Catalog Corrupted

Feb 27, 2013

How to restore database if rman catalog corrupted and we we dont have bacup of catalog db ..all the backup info are stored in catalog db for prod databases.

View 7 Replies View Related

Recovery Manager (RMAN) :: To Restore 11gr2 Database To Point In Time

Dec 15, 2012

I am trying to restore 11gr2 database to point in time. using following steps:

Control files are fine, that are not restored.

RMAN> run
{
set until time "to_time('2012-12-13 12:12:00','YYYY-MM-DD HH24:MI:SS')";
}
RMAN> restore database;
RMAN> recover database;
RMAN> alter database open;

Here my problem is it is restore complete data what ever i was having, but i don't was it, i has to restore up to specified time only.

View 2 Replies View Related

Recovery Manager (RMAN) :: Duplicate Database From ASM To Non-ASM File System To Remote Machine

Aug 30, 2012

I have oracle 11.2.0.3.0 in Windows 2008 server R2 64 bit version. I have installed database ASMDB with ASM ... Now i have another one machine , I want to clone my database in that machine with Non ASM file system .. Can any one tell me step by step document to do it ?

Can i keep the database name as ASMDB in another Machine ?

View 9 Replies View Related

Recovery Manager (RMAN) :: Script / Daily Incremental Backups With Configure Commands For Oracle 11g Database

Aug 29, 2012

the rman backup script for weekly full backup and daily incremental backups with configure commands for oracle 11g database.

View 10 Replies View Related

Recovery Manager (RMAN) :: Allocate Channel Manually For Restore / Recovery

Jun 27, 2012

How i can manually allocate channel for my backups going to tape?

For disk backups i can do and it work...
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'J:dbname\%U';
restore database preview;
}

View 2 Replies View Related

Backup & Recovery :: RMAN-00554 - Initialization Of Internal Recovery Manager Package Failed?

Feb 11, 2011

I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.

oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB

Recovery Manager: Release 9.2.0.4.0 - 64bit Production

Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================

[code]...

View 11 Replies View Related

Backup & Recovery :: RMAN-00554 - Initialization Of Internal Recovery Manager Package Failed

Jun 25, 2013

While connecting to target database from stand database. I am getting below error.

calhost dbs]$ sqlplus system/oracle@proddb

SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013

Copyright (c) 1982, 2005, Oracle. All rights reserved.

Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options

SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb

Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013

Copyright (c) 1982, 2005, Oracle. All rights reserved.

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges

View 7 Replies View Related

Recovery Manager (RMAN) :: Backup-Based Duplication Without A Target And A Recovery Catalog Connection?

Sep 30, 2012

how to duplicate it on oracle 11g xe windows 2003

i have read from documentation but getting some error.

in last

E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe

[code]...

Backup-Based Duplication Without a Target and a Recovery Catalog Connection?

View 6 Replies View Related

Recovery Manager (RMAN) :: Possible To Make Recovery Of Deleted Files

Jan 6, 2013

I am making incremental backups via RMAN, the backups are staying at disk. And the infrastructure team will copy this files backups to tape. And they want delete the files that will staying in disk via RMAN. Until now it's ok.

But and if I need of backups that stay on tape, it's possible make a recovery of deleted files by rman.

View 3 Replies View Related

Recovery Manager (RMAN) :: Schema Recovery Using Backup?

May 2, 2013

Is this possible to recover a schema using RMAN bckup

View 5 Replies View Related

Enterprise Manager :: Database Version For 10g OMS Repository?

Feb 1, 2013

What database version is supported as a repository for 10g OMS?

View 5 Replies View Related

Recovery Manager (RMAN) :: Log Switch During Backup?

Jan 20, 2013

I have seen in many RMAN backup scripts that a manual log switching is performed in first line of the script? What is it purpose, just to write changes needed to reconstruct the DML/DDL statements to online redo logfiles and start the archiving process if db is running in archive log mode?

View 2 Replies View Related

Recovery Manager (RMAN) :: Way To Rename Dbfs

Oct 8, 2012

11.2.0.3 win 2003. have direct aim to restore database from inc0+inc1 backup + recover up to latest archives made after inc1.

Steps have to be done:

1. SQLPLUS> startup nomount from pfile='......';
2. RMAN> restore controlfile from ...
3. SQLPLUS > alter database mount;
4. RMAN> run
{

[code]...

failover to previous backup

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/08/2012 13:30:20

[code]....

List of Backup Sets
===================

BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
795 108.13M DISK 00:00:16 05-OCT-12
BP Key: 831 Status: AVAILABLE Compressed: YES Tag: BACKUP_WORK_00000

[code]...

Questions:

1. Why it ignoring "set new name" and db_file_name_convert??
2. Why no backup or copy of datafile 1,2,3,4 found to restore, it can seee it clearly through all its commands?

View 4 Replies View Related

Recovery Manager (RMAN) :: Backup To Filesystem And Not ASM In RAC

Aug 27, 2012

I am using Oracle 11.2.0.3 RAC (2 nodes) + ASM on AIX 7.1

I am backing up my Oracle database through RMAN to ASM disk groups..I have a requirement to backup also to an OS file systems. So what I did that I mounted an NFS across the 2 nodes of my RAC database.I am running backup from node 2 only.My issue now is that I am facing a real performance issue when backing up to NFS.My question is there any way to take an RMAN backup to local file system on node 2? or in other way what are the options to take RMAN backups to an OS file system?

I tried to copy from ASM to OS file system but i was advised to backup to file system using the format command.what should i do in such case? since I am facing performance issue to backup to NFS.

View 8 Replies View Related

Recovery Manager (RMAN) :: Physical And Logical Standby?

Aug 29, 2013

,I have a test environment with Primary DB Server, Physical Standby and Logical Standby.The Logical Standby DB (cur_log_stdb) is backed up every evening by RMAN and I have a question:If I recover my Logical Standby DB from backup and switch replication to new Logical Standby DB (new_log_stdb) it will work or not?My steps e.g.:1. Make a new server for my new_log_stdb and repair structure of catalogs;2. Repair listener.ora and tnsnames.ora files from cur_log_stdb to new_log_stdb;3.

Restore DB with RMAN from backup to new_log_stdb;4. On cur_log_stdb execute "alter database stop logical standby apply";5. Change a DNS name from cur_log_stdb to new_log_stdb;6. On new_log_stdb execute "alter database start logical standby apply immediate";I'm not sure that archivelogs will apply to the new_log_stdb for period since rman backup was created.  Configuration:Oracle Linux 6.4Oracle Database 11.2.0.3Primary and Physical with Data Guard

View 1 Replies View Related

Recovery Manager (RMAN) :: Taking Backup In 3 Files?

Mar 27, 2013

I took backup of Datafiles , archivelog files and controlfile through RMAN. Now, i want 3 backup file will created as a output of RMAN operation. It would be :

1 backupfile for all the datafiles
1 backupfile for all the archivelog files
1 backupfile for controlfile.

It have to be regardlessly whatevr my DB size is. It it possible to do so. How i can can write rman script to accomplish the task.

View 7 Replies View Related

Recovery Manager (RMAN) :: How To Delete All Archivelog Backups Of The Day

Sep 3, 2013

Oracle 10gR2 on 64-bit RHEL.Backup Strategy:There will be a level-0 backup of the database every Sunday and level-1 every weekday.Archivelogs will be backed up up every 30 minutes. 

Q: How can I delete ALL the archivelog backups that were taken that day (every 30 minutes) right after successful completion of level-0 or level-1 backup?

I want to delete them because they may not be of any use after the level-0 or level-1 backup (am I right)? 

View 7 Replies View Related

Recovery Manager (RMAN) :: How To Test Restore In Another Server

Feb 19, 2013

I want to test full backup (hot backup using RMAN) of my DB (11.2 SE) on another server (I didn't install DB on yet).

View 6 Replies View Related

Recovery Manager (RMAN) :: Control File Restoration

Mar 7, 2013

We have Oracle 11g on Windows and Daily full Netbackup on Tape @3:00 Am and on disk @3:00 Pm .When we try to restore DB with following command it restore control file from Disk and Not from Tape .

RMAN> RUN{
2> allocate channel t1 type 'sbt_tape' parms='SBT_LIBRARY=C:WINDOWSsystem32orasbt.dll';
SEND 'NB_ORA_POLICY=ORACLE_DBMS_KTPH12_PROD_BTS_Daily, NB_ORA_SERV=b-nimhp1sys101, NB_ORA_CLIENT= b-btshp1dbs213';4> restore until time "TO_DATE('17-02-2013 03:00:00','dd-mm-yyyy hh24:mi:ss')" controlfile to 'G:oradataTLPRDdcontrol01.ctl' from autobackup;
5> }

Why it is not restring from Tape and Restoring from DISK?

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved