Recovery Manager (RMAN) :: Backup To Filesystem And Not ASM In RAC
Aug 27, 2012
I am using Oracle 11.2.0.3 RAC (2 nodes) + ASM on AIX 7.1
I am backing up my Oracle database through RMAN to ASM disk groups..I have a requirement to backup also to an OS file systems. So what I did that I mounted an NFS across the 2 nodes of my RAC database.I am running backup from node 2 only.My issue now is that I am facing a real performance issue when backing up to NFS.My question is there any way to take an RMAN backup to local file system on node 2? or in other way what are the options to take RMAN backups to an OS file system?
I tried to copy from ASM to OS file system but i was advised to backup to file system using the format command.what should i do in such case? since I am facing performance issue to backup to NFS.
View 8 Replies
ADVERTISEMENT
Feb 11, 2011
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
View 11 Replies
View Related
Jun 25, 2013
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
View 7 Replies
View Related
Sep 30, 2012
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
View 6 Replies
View Related
May 2, 2013
Is this possible to recover a schema using RMAN bckup
View 5 Replies
View Related
Jan 20, 2013
I have seen in many RMAN backup scripts that a manual log switching is performed in first line of the script? What is it purpose, just to write changes needed to reconstruct the DML/DDL statements to online redo logfiles and start the archiving process if db is running in archive log mode?
View 2 Replies
View Related
Mar 27, 2013
I took backup of Datafiles , archivelog files and controlfile through RMAN. Now, i want 3 backup file will created as a output of RMAN operation. It would be :
1 backupfile for all the datafiles
1 backupfile for all the archivelog files
1 backupfile for controlfile.
It have to be regardlessly whatevr my DB size is. It it possible to do so. How i can can write rman script to accomplish the task.
View 7 Replies
View Related
Jan 22, 2013
During the last week, we faced many network issues that prevent our RMAN files to be copied completely. Backup team offer a temporary solution that we have to generate only one backup file to be transferred from source to destination (tape).
View 5 Replies
View Related
Nov 12, 2012
I need to now how can i create a new database from the RMAN Full Backup , is it possible or not? and if possible how?
View 8 Replies
View Related
Sep 18, 2013
Can't start the Database and can't backup What is happening now. My database connection is not stable so can't do the backup.I spent two days trying unsuccessfully.
check the following print screen : [test@localhost ~]$ xhost +access control disabled, clients can connect from any host[test@localhost ~]$ [test@localhost ~]$ [test@localhost ~]$ su - rootPassword: [root@localhost ~]# [root@localhost ~]# [root@localhost ~]# su - oracle[oracle@localhost ~]$ [oracle@localhost ~]$ export ORACLE_SID=db11gr2[oracle@localhost ~]$ [oracle@localhost ~]$ echo $ORACLE_HOME/u01/app/oracle/product/11.2.0/db_1[oracle@localhost ~]$
[code]....
View 13 Replies
View Related
Sep 10, 2012
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
run {
allocate channel ch1 type 'sbt_tape'
PARMS="SBT_LIBRARY=/usr/local/bin/simpana/Base/libobk.so,BLKSIZE=1048576,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1,ThreadCommandLine=BACKUP -jm 45 -a 2:71 -cl 9 -ins 9 -at 22 -j 294321 -jt 294321:4:1 -bal 1 -rcp 0 -ms 1 -data -ma 89 -cn oraclehost -vm Instance001)"
TRACE 0;
setlimit channel ch1 maxopenfiles 8;
backup
incremental level = 0
filesperset = 32
database
include current controlfile spfile ;
}
exit;
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
Oracle 10.2.0.5 for Linux on IBM POWER
View 2 Replies
View Related
Sep 4, 2013
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
View 6 Replies
View Related
Nov 29, 2012
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
View 5 Replies
View Related
Jan 3, 2013
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code].....
get the following error when i do this,
RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45
ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
View 1 Replies
View Related
Nov 13, 2013
Any procedure which we can initiate an incremental backup without Level 0 backup.
View 9 Replies
View Related
Jul 25, 2013
,I am new to Oracle database administration i am working on a 24*7 tool .the tool will work as a non stop.this is a standalone tool.there wont be any one who will be taking care of the database.I need to design a backup statergyNeed to take backups on timly basis.Since the database can't be go offline cold backup's can not be useenhot backup needs to implemented.what are steps needs to do for hot backup.Is there are some pre defined scripts to run the backup.
View 6 Replies
View Related
Oct 23, 2012
I'm using database 11g & restore backup from another location.
RMAN> RESTORE CONTROLFILE FROM '/u01/RMAN/forstandby_0acekubq_1_1';
RMAN> catalog start with '/u01/RMAN/';
RMAN> restore database;
channel ORA_DISK_1: reading from backup piece /u01/RMAN/forstandby_09ceku8r_1_1
channel ORA_DISK_1: ORA-19870: error while restoring backup piece /u01/RMAN/forstandby_09ceku8r_1_1
ORA-19599: block number 782 is corrupt in backup piece /u01/RMAN/forstandby_09ceku8r_1_1
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/23/2012 19:24:11
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
View 1 Replies
View Related
Apr 11, 2013
I'm trying to backup database to a specific folder but it's failing:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/11/2013 22:41:59
ORA-19502: write error on file "/home/backup/rmanbackup/bak_11_1_812500536_test", block number 3520128 (block size=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: 4
Additional information: 3520128
Additional information: 274432
command for backup is following:
backup database format '/home/backup/rmanbackup/bak_%s_%p_%t_test';
View 5 Replies
View Related
Feb 10, 2011
We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
View 11 Replies
View Related
Jun 27, 2012
How i can manually allocate channel for my backups going to tape?
For disk backups i can do and it work...
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'J:dbname\%U';
restore database preview;
}
View 2 Replies
View Related
Jun 7, 2013
I am using RMAN with a recovery catalog option on a separate Database. My question is
When we use catalog does RMAN keep the information in Control file of the Target Database as well or only in recovery catalog? I am asking this in case We lost the database which contains the recovery catalog what to do?
View 4 Replies
View Related
Sep 23, 2012
Can the target database and the recovery catalog database be the same?
View 5 Replies
View Related
Jan 6, 2013
I am making incremental backups via RMAN, the backups are staying at disk. And the infrastructure team will copy this files backups to tape. And they want delete the files that will staying in disk via RMAN. Until now it's ok.
But and if I need of backups that stay on tape, it's possible make a recovery of deleted files by rman.
View 3 Replies
View Related
Oct 18, 2011
I have problem on using "delete obsolete" in RMAN.
First, let describe my backup configuration.
1. Full backup every Monday (17-Oct, 10-Oct, 3-Oct, 26-Sep)
2. Incremental backup for other days
3. Enable autobackup of control file
4. Backup archive log every day
5. RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS
6. Execute "Delete obsolete" every day
7. control file is used instead of catalog
The results observed:
1. Backup of control files older than 30 days will be deleted
2. Backup of archive log files older than 30 days will be deleted.
3. Backup of datafiles older than ~14 days but before 30 days are also DELETED.
In my example, the backup of datafiles created at 26-Sep is deleted at 16-Oct.
I tried "restore database validate until time "sysdate-22"" at 17-Oct. And RMAN reported "datafile xx will be created automatically during restore operation". It seems that RMAN failed to do restoration up to 22 days ago. The retention policy I set seems not effective on datafile backups.
I checked view v$backup_set and the "Keep" is "No" and "Keep until" is empty.
The only thing I can think of, is the settings of "CONTROL_FILE_RECORD_KEEP_TIME". It is marked "7" in the Oracle, which is less than the retention. But I suppose this only causes the backup not deleted, but NOT be deleted earlier.
View 6 Replies
View Related
Sep 28, 2011
I have a database in Archivelog mode and Flashback mode. I am trying to connect to RMAN. But am getting the error
SQL> select name,log_mode,flashback_on from v$database
2 /
NAME LOG_MODE FLA
--------- ------------ ---
ORCL ARCHIVELOG YES
SQL> show user
USER is "SYS"
SQL> host rman target /
[code]....
View 16 Replies
View Related
Oct 18, 2012
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies
View Related
Jan 24, 2011
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
View 17 Replies
View Related
Aug 13, 2013
My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
View 9 Replies
View Related
Jan 4, 2012
when i performed incomplete recovery i try to set until time but it shows RMAN-20207:until time or recovery window shoubld be before resetlogs.
View 3 Replies
View Related
Jan 1, 2012
REGISTER DATABASE;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 01/01/2012 11:02:40
RMAN-06428: recovery catalog is not installed
View 4 Replies
View Related
