I have oracle 11.2.0.3.0 in Windows 2008 server R2 64 bit version. I have installed database ASMDB with ASM ... Now i have another one machine , I want to clone my database in that machine with Non ASM file system .. Can any one tell me step by step document to do it ?
Can i keep the database name as ASMDB in another Machine ?
We are running 11.2.0.3.2.
In my catalog for the "source" database (rman target db), I have the backupsets for a full database backup ended at Feb. 7, 03:43:37. These are online backups. So, there are archived redo logs being generated while it runs and the following archived redo logs finished at Feb. 7, 04:00:24.
We duplicate databases all the time. So, this is not a new concept for us. The one thing that has changed is that we now back up to disk (using the flashback recovery area) and then later on, initiate a backup to tape. Prior to this go-live, we did all of our backups directly to tape. The catalog does not seem confused. It knows it needs to go to tape because it's beyond the retention for disk backups. The only problem is that it is going to the backup prior to the backupset I want, only for a couple of files.
In the past, when all went directly to tape, we would do a set until time 'Feb. 7, 03:43:37' and it would automatically restore the backupset that finished then and apply archived redo logs as necessary to make a consistent copy. Now, if I use the same model, it's going to a backup set from the prior date for 3 particular files. If I change the time to when the archived redo logs ended their backup, 04:00, it still goes back to the day before, but only for 2 files.
I can list a backup of each specific file and see that the file is in the backupset for which I expect RMAN to pull. How can I figure out a date/time to go back to if not using the method of reviewing the catalog entries and timestamps?
I have a RUN file within a script to duplicate a database. As part of this RUN file I also run the command configure controlfile autobackup off; as part of this RUN file. However, this command has turned off backup of the control file on the AUXILLARY database (i.e. production) as well as the TARGET database (test). Is this supposed to happen?
My run file is:
rman TARGET sys/XXXX@${DB}-SOURCE AUXILIARY /
RUN {
allocate AUXILIARY channel a1 type disk;
allocate AUXILIARY channel a2 type disk;
allocate AUXILIARY channel a3 type disk;
allocate AUXILIARY channel a4 type disk;
[Code]....
In DR site. i have to clone the database from pshysical standby database and clone db will be normal db not standby. Is it possible to do rman duplicate from active dataguard? will it support the duplicate database from active database or i have to take the rman backup of standby database and duplicate from backup piece.
View 2 Replies View RelatedI am having 3 oracle 10.2.0.5 version standard edition databases running on windows platform on 3 different servers. OEM is configured for all the 3 databases and we are able to access these OEM from their respective servers.
As per my knowledge, I should be able to access the OEMs of all 3 databases from my local machine. But Iam facing problem in accessing the OEMs from my local machine.
what changes need to be done so that I can access the OEMs of all 3 databases from one single local machine rather than checking it by logging into their respective servers.
I am using RMAN with a recovery catalog option on a separate Database. My question is
When we use catalog does RMAN keep the information in Control file of the Target Database as well or only in recovery catalog? I am asking this in case We lost the database which contains the recovery catalog what to do?
am trying to backup my oracle database using RMAN to a remote machine. both systems are using redhat linux. i have successfully configured NFS on my remote machine and mounted it from my oracle database machine.
i then configure rman channel to disk on mounted linux directory..when i take full backup of database i receive this error
ORA-19504: failed to create file "/mnt/ora_df766174940_s104_s1"
ORA-27054: NFS file system where the file is created or resides is not mounted w
ith correct options
Additional information: 3
How do i mount this with correct options the error msg says OR what do i do to backup to the said directory?
I want to duplicate a prod database in to a dev db.I am using catalog database to connect to target and auxiliary datbase.I copied all backupsets to the local disk on Dev env in the correct path.For RMAN duplicate ,does the backuppeices need to be present on PROD filesystem as well or just DEV filesystem or both.
View 4 Replies View RelatedCan the target database and the recovery catalog database be the same?
View 5 Replies View RelatedWe have Oracle 11g on Windows and Daily full Netbackup on Tape @3:00 Am and on disk @3:00 Pm .When we try to restore DB with following command it restore control file from Disk and Not from Tape .
RMAN> RUN{
2> allocate channel t1 type 'sbt_tape' parms='SBT_LIBRARY=C:WINDOWSsystem32orasbt.dll';
SEND 'NB_ORA_POLICY=ORACLE_DBMS_KTPH12_PROD_BTS_Daily, NB_ORA_SERV=b-nimhp1sys101, NB_ORA_CLIENT= b-btshp1dbs213';4> restore until time "TO_DATE('17-02-2013 03:00:00','dd-mm-yyyy hh24:mi:ss')" controlfile to 'G:oradataTLPRDdcontrol01.ctl' from autobackup;
5> }
Why it is not restring from Tape and Restoring from DISK?
During the last week, we faced many network issues that prevent our RMAN files to be copied completely. Backup team offer a temporary solution that we have to generate only one backup file to be transferred from source to destination (tape).
View 5 Replies View RelatedDB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1 64 bits
RMAN backup throws the error:
RMAN-06169: could not read file header for datafile 40 error reason 1
RMAN-06169: could not read file header for datafile 41 error reason 1
RMAN-06169: could not read file header for datafile 40 error reason 1
released channel: oem_disk_backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 06/14/2012 07:54:43
[code]...
Could we skip the backup of the above missing files using RMAN -> backup database skip inaccessible;On further research, this would compromise tablespace SYSAUX recoverability...Questions:
1) What caused the above missing files to get created?
2) What is recommended: Recover the datafiles?
Version Details:
O.S Version HP-UX B.11.31 U ia64
Oracle DB Version 11.2.0.3.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Scenario :
Using RMAN Active cloning to duplicate a RAC database from Production to Development environment.
Problem:
At the end of the cloning the below errors are reported;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
How to prevent the error of RMAN-06054: media recovery requesting unknown archived log for thread with sequence and starting SCN of while performing the RMAN Active Cloning? I do NOT want to use UNTIL clause.
on 11g R2 on Win 2008, I want to duplicate my target DB which is on a a remote server using RMAN backups. The destination is on local server.
I will run RMAN on local server.
In initnewdb.ora, I should add :
# Convert file names to allow for different directory structure if necessary.
#DB_FILE_NAME_CONVERT=(/u01/app/oracle/oradata/DB11G/,/u01/app/oracle/oradata/NEWSID/)
#LOG_FILE_NAME_CONVERT=(/u01/app/oracle/oradata/DB11G/,/u02/app/oracle/oradata/NEWSID/)
my questions :
1-In my case would it be :
# Convert file names to allow for different directory structure if necessary.
#DB_FILE_NAME_CONVERT=(\remoteserver:/u01/app/oracle/oradata/DB11G/,/u01/app/oracle/oradata/NEWSID/)
#LOG_FILE_NAME_CONVERT=(\remoteserver:/u01/app/oracle/oradata/DB11G/,/u02/app/oracle/oradata/NEWSID/)
2- should we keep the convert parameters in init.ora file after duplication for always ?
Can I register a database say MYDB in datacenter1 with two different catalogs i.e., I have one rman catalog a datacenter1 location and another rman catalog in datacenter2 location. So, can I register MYDB to rman catalogs at datacenter1 and datacenter2. If, so how can we keep rman catalogs at datacenter1 and datacenter2 in sync. For MYDB rman backups I just want to use local rman catalog which is datacenter1. But I just want to keep a redundant copy of the rman catalog.
View 8 Replies View RelatedI need to now how can i create a new database from the RMAN Full Backup , is it possible or not? and if possible how?
View 8 Replies View Related RMAN> register database; RMAN-00571:
===========================================================RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============RMAN-00571: ===========================================================RMAN-03002: failure of register command at 08/15/2013 19:48:59RMAN-03014: implicit resync of recovery catalog failedRMAN-03009: failure of full resync command on default channel at 08/15/2013 19:48:59ORA-01580: error creating control backup file +ORALIN_RECO/snapcf_oralin.fORA-
[code][....
Can't start the Database and can't backup What is happening now. My database connection is not stable so can't do the backup.I spent two days trying unsuccessfully.
check the following print screen : [test@localhost ~]$ xhost +access control disabled, clients can connect from any host[test@localhost ~]$ [test@localhost ~]$ [test@localhost ~]$ su - rootPassword: [root@localhost ~]# [root@localhost ~]# [root@localhost ~]# su - oracle[oracle@localhost ~]$ [oracle@localhost ~]$ export ORACLE_SID=db11gr2[oracle@localhost ~]$ [oracle@localhost ~]$ echo $ORACLE_HOME/u01/app/oracle/product/11.2.0/db_1[oracle@localhost ~]$
[code]....
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
I like to duplicate the database DATABASEA to DATABASEB and need to be run in same server. I tried to bounce the listener & databaseb instance multiple times but no lucky.
Step 1 : The instance DATABASEB is in Nomount stage
Step 2 :
==> tnsping DATABASEB
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-SEP-2012 07:36:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = client )(PORT = 1521)) (CONNECT_DATA = ( SERVER = DEDICATED) (SERVICE_NAME = DATABASEB)(UR=A)))
OK (10 msec)
Step 3 :
==> rman target sys/*****@DATABASEA auxiliary sys/********@DATABASEB
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 11 07:37:50 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DATABASEA (DBID=1723462779)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
[code]...
How to restore database if rman catalog corrupted and we we dont have bacup of catalog db ..all the backup info are stored in catalog db for prod databases.
View 7 Replies View RelatedI have four Oracle 8i databases that can not be removed because of client requirements. These 8i databases have there own RMAN catalog which is 10G (Originally there were Oracle 8i, 9i and 10g databases using it but are now moved to 11g catalog). Databases are backing up fine. However, all the other databases are using the RMAN 11g Catalog. I want to point the Oracle 8i databases to point to the RMAN 11g recovery catalog. I created an 8i schema, however, i'm getting the following error message: RMAN-06429: RCVCAT database is not compatible with this version of RMAN. however, I wanted to put the question out there to see if there are any work arounds.
View 3 Replies View RelatedI am trying to restore 11gr2 database to point in time. using following steps:
Control files are fine, that are not restored.
RMAN> run
{
set until time "to_time('2012-12-13 12:12:00','YYYY-MM-DD HH24:MI:SS')";
}
RMAN> restore database;
RMAN> recover database;
RMAN> alter database open;
Here my problem is it is restore complete data what ever i was having, but i don't was it, i has to restore up to specified time only.
We want to copy a file from a remote machine to the DB server. copy \<IP_ADRESS>SHARED_FOLDERsome_file.sql d:copied_file.sql
I've used Java and a wrapped it into a PL/SQL procedure so I can do :
exec run_os_command(p_command => 'copy \<IP_ADRESS>SHARED_FOLDERsome_file.sql d:copied_file.sql');
The file was not copied.
I have mapped \<IP_ADRESS>SHARED_FOLDER to x: for example and issued : exec run_os_command(p_command => 'copy x:some_file.sql d:copied_file.sql');
The file was not copied.
But when I issued from the OS prompt copy x:some_file.sql d:copied_file.sql then the file is copied.
What can I add to the PL/SQL procedure so it wil work ?
the rman backup script for weekly full backup and daily incremental backups with configure commands for oracle 11g database.
View 10 Replies View RelatedHow one should know whether RMAN is using target database control file or using separate catalog database. Also what one should do if he dont have catalog users credentials.
View 3 Replies View RelatedHow i can manually allocate channel for my backups going to tape?
For disk backups i can do and it work...
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'J:dbname\%U';
restore database preview;
}
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?