Recovery Manager (RMAN) :: Active Cloning Fails With 06054 - Missing Log File?
May 15, 2013
Version Details:
O.S Version HP-UX B.11.31 U ia64
Oracle DB Version 11.2.0.3.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Scenario :
Using RMAN Active cloning to duplicate a RAC database from Production to Development environment.
Problem:
At the end of the cloning the below errors are reported;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
How to prevent the error of RMAN-06054: media recovery requesting unknown archived log for thread with sequence and starting SCN of while performing the RMAN Active Cloning? I do NOT want to use UNTIL clause.
View 5 Replies
ADVERTISEMENT
May 16, 2013
O.S Version HP-UX B.11.31 U ia64
Oracle DB Version 11.2.0.3.0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Storage : ASM Diskgroups
-------------------------------------------------------------------------------------------------------------------------------------
I am new to Oracle, like to get clarified on below;
1. From where can we run the RMAN Clone script?
Source DB : PRDDB HOST: PRDHOST
Destination DB: DUPDB HOST: DEVHOST
Are there any constraints on running the RMAN Script from the Source DB Host - PRDHOST?
If I am running it from PRDHOST, do I have to have the initdupdb.ora available on PRDHOST?
What are advantages and disadvantages on running the script on Source & Destination Host?
View 5 Replies
View Related
Jun 15, 2012
DB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1 64 bits
RMAN backup throws the error:
RMAN-06169: could not read file header for datafile 40 error reason 1
RMAN-06169: could not read file header for datafile 41 error reason 1
RMAN-06169: could not read file header for datafile 40 error reason 1
released channel: oem_disk_backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 06/14/2012 07:54:43
[code]...
Could we skip the backup of the above missing files using RMAN -> backup database skip inaccessible;On further research, this would compromise tablespace SYSAUX recoverability...Questions:
1) What caused the above missing files to get created?
2) What is recommended: Recover the datafiles?
View 10 Replies
View Related
Sep 11, 2012
I like to duplicate the database DATABASEA to DATABASEB and need to be run in same server. I tried to bounce the listener & databaseb instance multiple times but no lucky.
Step 1 : The instance DATABASEB is in Nomount stage
Step 2 :
==> tnsping DATABASEB
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-SEP-2012 07:36:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = client )(PORT = 1521)) (CONNECT_DATA = ( SERVER = DEDICATED) (SERVICE_NAME = DATABASEB)(UR=A)))
OK (10 msec)
Step 3 :
==> rman target sys/*****@DATABASEA auxiliary sys/********@DATABASEB
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 11 07:37:50 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DATABASEA (DBID=1723462779)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
[code]...
View 9 Replies
View Related
Feb 8, 2013
In DR site. i have to clone the database from pshysical standby database and clone db will be normal db not standby. Is it possible to do rman duplicate from active dataguard? will it support the duplicate database from active database or i have to take the rman backup of standby database and duplicate from backup piece.
View 2 Replies
View Related
May 3, 2011
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
View 2 Replies
View Related
Mar 7, 2013
We have Oracle 11g on Windows and Daily full Netbackup on Tape @3:00 Am and on disk @3:00 Pm .When we try to restore DB with following command it restore control file from Disk and Not from Tape .
RMAN> RUN{
2> allocate channel t1 type 'sbt_tape' parms='SBT_LIBRARY=C:WINDOWSsystem32orasbt.dll';
SEND 'NB_ORA_POLICY=ORACLE_DBMS_KTPH12_PROD_BTS_Daily, NB_ORA_SERV=b-nimhp1sys101, NB_ORA_CLIENT= b-btshp1dbs213';4> restore until time "TO_DATE('17-02-2013 03:00:00','dd-mm-yyyy hh24:mi:ss')" controlfile to 'G:oradataTLPRDdcontrol01.ctl' from autobackup;
5> }
Why it is not restring from Tape and Restoring from DISK?
View 13 Replies
View Related
Jan 22, 2013
During the last week, we faced many network issues that prevent our RMAN files to be copied completely. Backup team offer a temporary solution that we have to generate only one backup file to be transferred from source to destination (tape).
View 5 Replies
View Related
Aug 30, 2012
I have oracle 11.2.0.3.0 in Windows 2008 server R2 64 bit version. I have installed database ASMDB with ASM ... Now i have another one machine , I want to clone my database in that machine with Non ASM file system .. Can any one tell me step by step document to do it ?
Can i keep the database name as ASMDB in another Machine ?
View 9 Replies
View Related
Feb 28, 2013
We are running 11.2.0.3.2.
In my catalog for the "source" database (rman target db), I have the backupsets for a full database backup ended at Feb. 7, 03:43:37. These are online backups. So, there are archived redo logs being generated while it runs and the following archived redo logs finished at Feb. 7, 04:00:24.
We duplicate databases all the time. So, this is not a new concept for us. The one thing that has changed is that we now back up to disk (using the flashback recovery area) and then later on, initiate a backup to tape. Prior to this go-live, we did all of our backups directly to tape. The catalog does not seem confused. It knows it needs to go to tape because it's beyond the retention for disk backups. The only problem is that it is going to the backup prior to the backupset I want, only for a couple of files.
In the past, when all went directly to tape, we would do a set until time 'Feb. 7, 03:43:37' and it would automatically restore the backupset that finished then and apply archived redo logs as necessary to make a consistent copy. Now, if I use the same model, it's going to a backup set from the prior date for 3 particular files. If I change the time to when the archived redo logs ended their backup, 04:00, it still goes back to the day before, but only for 2 files.
I can list a backup of each specific file and see that the file is in the backupset for which I expect RMAN to pull. How can I figure out a date/time to go back to if not using the method of reviewing the catalog entries and timestamps?
View 4 Replies
View Related
Jul 25, 2012
We are using oracle as database in our application. For high availability we have a cluster of multiple nodes and the data is replicated using oracle streams. All the nodes in the cluster are active. We do not have any concept of stand-by.
Now we are planning to use oracle RMAN for backup and recovery. RMAN user's guide doesn't recommend any strategies for such deployments. It mainly focuses on primary/stand-by deployments.
View 1 Replies
View Related
Mar 3, 2012
New to oracle FAQ. I'm interested in oracle, waiting to explore more Technic's in 10g with a proper guidance. Hope i'm in the right place.Here is my question.
I need steps for configuring rman cloning with catalog & without catalog.were in prod db the source is in /u01 & in auxiliary db the client want in /u05. how to do it. here i have recreate control file or not
View 1 Replies
View Related
May 3, 2013
1) have taken backup at target side.
2) through SCP, transferred all the file to auxiliary side.
3) Ran the duplicate command at auxiliary side.
After running the command, i got the below error.
hish@localhost db_1]$ rman target sys/oracle@suman auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Apr 12 09:13:43 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: SUMAN (DBID=3778352561)
connected to auxiliary database: ASHISH (not mounted)
[code]......
View 2 Replies
View Related
Jun 27, 2012
How i can manually allocate channel for my backups going to tape?
For disk backups i can do and it work...
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'J:dbname\%U';
restore database preview;
}
View 2 Replies
View Related
Jun 7, 2013
I am using RMAN with a recovery catalog option on a separate Database. My question is
When we use catalog does RMAN keep the information in Control file of the Target Database as well or only in recovery catalog? I am asking this in case We lost the database which contains the recovery catalog what to do?
View 4 Replies
View Related
Jan 21, 2010
While running "Prompt>Emctl resetTZ agent"
it gives error message: jvm.dll missing....
View 1 Replies
View Related
Feb 11, 2011
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
View 11 Replies
View Related
Jun 25, 2013
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
View 7 Replies
View Related
Sep 30, 2012
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
View 6 Replies
View Related
Sep 23, 2012
Can the target database and the recovery catalog database be the same?
View 5 Replies
View Related
Jan 6, 2013
I am making incremental backups via RMAN, the backups are staying at disk. And the infrastructure team will copy this files backups to tape. And they want delete the files that will staying in disk via RMAN. Until now it's ok.
But and if I need of backups that stay on tape, it's possible make a recovery of deleted files by rman.
View 3 Replies
View Related
May 2, 2013
Is this possible to recover a schema using RMAN bckup
View 5 Replies
View Related
Oct 7, 2012
We have a nightly rman backup that was complete and clean.The backup contains a Data File, Control File and a backup Archive Log file.The database server crashed with all the subsequent archive logs lost.
We are trying to recover from the three backup files.We are bumping into the backup piece missing as all the archive logs are done. how to restore with the exising backup files. the lost archive logs are probably salvageable.
View 9 Replies
View Related
Jan 20, 2013
I have seen in many RMAN backup scripts that a manual log switching is performed in first line of the script? What is it purpose, just to write changes needed to reconstruct the DML/DDL statements to online redo logfiles and start the archiving process if db is running in archive log mode?
View 2 Replies
View Related
Oct 8, 2012
11.2.0.3 win 2003. have direct aim to restore database from inc0+inc1 backup + recover up to latest archives made after inc1.
Steps have to be done:
1. SQLPLUS> startup nomount from pfile='......';
2. RMAN> restore controlfile from ...
3. SQLPLUS > alter database mount;
4. RMAN> run
{
[code]...
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/08/2012 13:30:20
[code]....
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
795 108.13M DISK 00:00:16 05-OCT-12
BP Key: 831 Status: AVAILABLE Compressed: YES Tag: BACKUP_WORK_00000
[code]...
Questions:
1. Why it ignoring "set new name" and db_file_name_convert??
2. Why no backup or copy of datafile 1,2,3,4 found to restore, it can seee it clearly through all its commands?
View 4 Replies
View Related
Aug 27, 2012
I am using Oracle 11.2.0.3 RAC (2 nodes) + ASM on AIX 7.1
I am backing up my Oracle database through RMAN to ASM disk groups..I have a requirement to backup also to an OS file systems. So what I did that I mounted an NFS across the 2 nodes of my RAC database.I am running backup from node 2 only.My issue now is that I am facing a real performance issue when backing up to NFS.My question is there any way to take an RMAN backup to local file system on node 2? or in other way what are the options to take RMAN backups to an OS file system?
I tried to copy from ASM to OS file system but i was advised to backup to file system using the format command.what should i do in such case? since I am facing performance issue to backup to NFS.
View 8 Replies
View Related
Dec 13, 2012
Can I register a database say MYDB in datacenter1 with two different catalogs i.e., I have one rman catalog a datacenter1 location and another rman catalog in datacenter2 location. So, can I register MYDB to rman catalogs at datacenter1 and datacenter2. If, so how can we keep rman catalogs at datacenter1 and datacenter2 in sync. For MYDB rman backups I just want to use local rman catalog which is datacenter1. But I just want to keep a redundant copy of the rman catalog.
View 8 Replies
View Related
Aug 29, 2013
,I have a test environment with Primary DB Server, Physical Standby and Logical Standby.The Logical Standby DB (cur_log_stdb) is backed up every evening by RMAN and I have a question:If I recover my Logical Standby DB from backup and switch replication to new Logical Standby DB (new_log_stdb) it will work or not?My steps e.g.:1. Make a new server for my new_log_stdb and repair structure of catalogs;2. Repair listener.ora and tnsnames.ora files from cur_log_stdb to new_log_stdb;3.
Restore DB with RMAN from backup to new_log_stdb;4. On cur_log_stdb execute "alter database stop logical standby apply";5. Change a DNS name from cur_log_stdb to new_log_stdb;6. On new_log_stdb execute "alter database start logical standby apply immediate";I'm not sure that archivelogs will apply to the new_log_stdb for period since rman backup was created. Configuration:Oracle Linux 6.4Oracle Database 11.2.0.3Primary and Physical with Data Guard
View 1 Replies
View Related
Mar 27, 2013
I took backup of Datafiles , archivelog files and controlfile through RMAN. Now, i want 3 backup file will created as a output of RMAN operation. It would be :
1 backupfile for all the datafiles
1 backupfile for all the archivelog files
1 backupfile for controlfile.
It have to be regardlessly whatevr my DB size is. It it possible to do so. How i can can write rman script to accomplish the task.
View 7 Replies
View Related
Sep 3, 2013
Oracle 10gR2 on 64-bit RHEL.Backup Strategy:There will be a level-0 backup of the database every Sunday and level-1 every weekday.Archivelogs will be backed up up every 30 minutes.
Q: How can I delete ALL the archivelog backups that were taken that day (every 30 minutes) right after successful completion of level-0 or level-1 backup?
I want to delete them because they may not be of any use after the level-0 or level-1 backup (am I right)?
View 7 Replies
View Related
