Backup & Recovery :: Error While Restoring Database Using RMAN
Mar 31, 2011
i am trying to restore database using rman backup on same machine using command
RMAN> run {
2> set until sequence 23;
3> restore database;
4> recover database;
5> }
but it will give me error.
RMAN-00571: =======================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===========
RMAN-00571: =======================================================
RMAN-03002: failure of restore command at 03/31/2011 19:18:11
[code]....
View 3 Replies
ADVERTISEMENT
Sep 4, 2013
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
View 6 Replies
View Related
May 10, 2011
I have a live server on which Oracle 10g Database is running. We take full RMAN Backups everyday. Now we want to restore the RMAN Backup file from the Live server to another machine (which is going to be a test system). I want to restore the latest RMAN backup on the test machine (which is not on network).
When I copy the RMAN backup set in the flash recovery area of the test machine and then use "list backup", the backup set is not listed. I also tried "crosscheck backup" and then "list backup" but still the backup set does not appear. how can I register the backup set from live server into test machine and then restore it.
View 5 Replies
View Related
Dec 8, 2011
Just inherited an 8i DB that is being backed up with then common techniques used prior to RMAN. The tablespace is placed in backup mode, an OS copy of the file is taken, the tablespace is returned online, and the process is repeated until all files captured in an usable state.
It is running in archive log mode on a Linux OS and daily backups are initiated through crontab as well as jobs to purge the redo logs after backup. Backup storage recently filled - working since 2004. Not bad!
I have documented procedures for using these files with an operational 8i DB. Will I be able to restore these files directly into an 11g environment? What is the implication of 8i having DBA managed "RBS" (roll back segments) vs. 11g?
I am thinking I will have to build both versions.
View 7 Replies
View Related
Aug 6, 2012
I just duplicate my PRODUCTION database to TEST database (11.2.0.1 both) on windows 7.
I just create a backup from PRODUCTION:
RMAN> backup full database format ='C:Usersmy_usermiBBDDflash_recovery_are aTESTdatabase_%U';and controlfile backup:
RMAN> backup current controlfile format='C:Usersmy_usermiBBDDflash_recover y_areaTESTCONTROL_FILE_%U';now i'm trying to restore this backup into TEST with this script:
RMAN
CONNECT TARGET /
STARTUP NOMOUNT;
SET DBID 486238190; #DBID of TEST database
RUN
[Code]....
but i'm having a similar error when i tried to duplicate both databases ( post -->Error duplicate databases fallo de la recuperaci¾n del medio fÝsico
canal liberado: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: fallo del comando recover en 08/06/2012 11:53:06
ORA-00283: recovery session canceled due to errors
RMAN-11003: fallo al analizar/ejecutar la sentencia SQL: alter database recover
if needed start until cancel using backup controlfile
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 1: 'C:USERSmy_userMIBBDDORADATAPRODUCTIONSYSTEM01. D BF'
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'C:USERSmy_userMIBBDDORADATAPRODUCTIONSYSTEM01.D BF'
Controlfile was restored correctly. what am I doing wrong?
View 23 Replies
View Related
Aug 7, 2012
I've read a lot about the different types of backup available with Oracle (hot and cold backup). However, I was thinking of a different way of performing this task. I'm currently using Windows Server 2008 R2 and Oracle 11g Standard Edition. I'd like to schedule an entire backup of my server via the utility "Windows Server Backup" (available for free).That way, I could recover my entire server with all the programs and files in case the latter crashes.I'm wondering if this solution could be used as a way of backing up (and recovering) the Oracle database. Should I still set up a regular hot backup with the Archivelog mode enabled in case some operations/transactions were being done at the time of the crash (for the data integrity)?
View 2 Replies
View Related
Dec 22, 2012
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
View 2 Replies
View Related
Nov 17, 2012
We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database
[code]....
View 6 Replies
View Related
Jun 21, 2011
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
View 6 Replies
View Related
Dec 13, 2011
This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
View 1 Replies
View Related
Jul 11, 2012
I want to ask if I restore a control file from backup of say day2 and I recover till day1 using RMAN script, then what will be the state of my database? I mean day2 control file may be having SCN-Day2, and I am instructing RMAN to recover till past point in time that is SCN-Day1.
View 3 Replies
View Related
Jul 19, 2013
I am running Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I ran the following commands in RMAN:
RMAN>
connect target /
CONFIGURE COMPRESSION ALGORITHM 'MEDIUM' ;
set encryption identified by 'xxxx' only;
run {
[code]...
I get the follwing error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/19/2013 06:57:4
ORA-03113: end-of-file on communication channel
[code]...
View 3 Replies
View Related
Mar 8, 2013
Every Sunday in the month - Full Backup
RMAN > BACKUP DATABASE;
Rest of the days - Incremental Level 1 Backup.
RMAN> BACKUP INCREMENTAL LEVEL 1 DATABASE
Day of Month Backup Taken Backup Contents
1st Full Backup All files as of the 1st - Sunday
2nd Incremental #1 Files updates between the 1st and 2nd - Monday
3rd Incremental #2 Files updates between the 2nd and 3rd - Tuesday
4th Incremental #3 Files updates between the 3rd and 4th - Wednesday
5th Incremental #4 Files updates between the 4th and 5th - Thrusday
6th Incremental #6 Files updates between the 5th and 6th - Friday
7th Incremental #7 Files updates between the 6th and 7th - Saturday
8th Full Backup #8 Files updates from 1st,2nd to 7th - Sunday
9th Incremental #9 Files updates between the 8th and 9th _ Monday
10th Incremental #10Files updates between the 9th and 10th - Tuesday
11th Incremental #11 Files updates between the 10th and 11th - Wednesday
12th Incremental #12 Files updates between the 11th and 12th - Thrusday
13th Incremental #13 Files updates between the 12th and 13th - Friday
14th Incremental #14 Files updates between the 13th and 14th - Saturday
15th Full Backup CRASHES - NOT COMPLETED - Sunday
I would need to restore now from #8 ( full backup ) and #9 to #14 ( incremental backup )
Tell me the "restore command" to achieve the output?
View 6 Replies
View Related
Dec 16, 2012
I'm encountering the following 2 different errors from RMAN:
Prior to OS restart:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10039: error encountered while polling for RPC completion on channel t1
RMAN-10006: error running SQL statement: select act from x$ksusex where sid=:1 and serial=:2
RMAN-10002: ORACLE error: ORA-03113: end-of-file on communication channel
[code]...
diagnose what actually occurred during RMAN backup?
View 1 Replies
View Related
May 22, 2012
database size is 30GB is it recommended for RMAN backup
View 2 Replies
View Related
Jun 7, 2006
Oracle 10gR2 (base)
Dataguard, no RAC
no ASM
Performing backups on the physical standby via RMAN. We need to restore our test database, and right now it is equivalent to the production. The DUPLICATE command seemed the best bet. We have controlfile and SPFile both on Auto-backup, and the RMAN on a six day retention with weekly 0 level backups and nightly level 1 cumulative backups.
However, when I run the DUPLICATE it chokes being unable to find a current controlfile nor one in backup, even though we have six days worth of supposedly good (validated) backups. We are not using a catalog, rather the DB controlfile.
The solution to this error is reopen the database and try again. however, the physical standby cannot be opened. It is the standby. What if we move the last backup to the primary database, "register" it there, and try this DUPLICATE?
I have seen nothing on this in my searches, and the Oracle documentation does not address this, though it recommends backup from the Physical Standby.
RMAN-05513 is the error code.
View 10 Replies
View Related
Nov 7, 2013
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.So surely the requesting backup is behind retention date and has been pushed to tape.
View 1 Replies
View Related
Dec 13, 2011
can we restore database from obsolete backup using rman
View 2 Replies
View Related
Mar 14, 2012
How to setup the database for automated RMAN backup. like if we want to have a backup exactly at 8:00 PM IST. So how to configure it.
View 6 Replies
View Related
Mar 4, 2011
We are running a 5Tb database backup which takes really a long time to backup and impacts the performance in general during the backup. We got a DataGaurd database in place which we want to utilize to run the RMAN backup on to avoid performance impacts and just use DG database for backup and DR purposes. My Question is if we run the backups on DataGaurd Database, How would a RMAN DG database backup would clear the archive logs from Primary production and from DataGaurd Database during the backup process?
View 7 Replies
View Related
Feb 28, 2013
We are running 11.2.0.3.2.
In my catalog for the "source" database (rman target db), I have the backupsets for a full database backup ended at Feb. 7, 03:43:37. These are online backups. So, there are archived redo logs being generated while it runs and the following archived redo logs finished at Feb. 7, 04:00:24.
We duplicate databases all the time. So, this is not a new concept for us. The one thing that has changed is that we now back up to disk (using the flashback recovery area) and then later on, initiate a backup to tape. Prior to this go-live, we did all of our backups directly to tape. The catalog does not seem confused. It knows it needs to go to tape because it's beyond the retention for disk backups. The only problem is that it is going to the backup prior to the backupset I want, only for a couple of files.
In the past, when all went directly to tape, we would do a set until time 'Feb. 7, 03:43:37' and it would automatically restore the backupset that finished then and apply archived redo logs as necessary to make a consistent copy. Now, if I use the same model, it's going to a backup set from the prior date for 3 particular files. If I change the time to when the archived redo logs ended their backup, 04:00, it still goes back to the day before, but only for 2 files.
I can list a backup of each specific file and see that the file is in the backupset for which I expect RMAN to pull. How can I figure out a date/time to go back to if not using the method of reviewing the catalog entries and timestamps?
View 4 Replies
View Related
Jul 24, 2012
Version of Oracle: 9.2.0.8.0 Enterprise edition
Running on Windows 2003 Server
No catalog
Backup controlfile and database work great.
Cannot run backup archivelog all command. I did check metalink but was not able to find this error / bugggh.
RMAN-03002 failure of backup command at 07/24/2012
Rman-00600 internal error, arguments [9018] [7] [] [] []
View 10 Replies
View Related
Nov 29, 2012
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
View 5 Replies
View Related
Jan 3, 2013
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code].....
get the following error when i do this,
RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45
ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
View 1 Replies
View Related
Oct 9, 2012
I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .
If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .
View 2 Replies
View Related
Jan 25, 2011
I have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED******************
configure channel 1 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
configure channel 2 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U';
CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
*******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN**************
rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental
rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND
CONNECT TARGET SYS/ORACLE@ORCL
*******************************************************
********INCREMENTAL BACKUP COMMAND*********************
RUN
{
BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE;
BACKUP ARCHIVELOG ALL DELETE INPUT;
}
********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
View 2 Replies
View Related
Aug 3, 2011
Im trying to restore my spfile and (later controlfile) to a new location:
RMAN> connect catalog rman11cv/pwd@metarep
Connected...
RMAN> connect target
ansluten till msldatabasen: DATABASE (DBID=510270843)
RMAN> run
2> {
3> allocate channel ch1 type 'sbt_tape'
4> PARMS="BLKSIZE=262144,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1)"
5> TRACE 0;
6> Restore spfile to pfile 'y:
estorepfile.ora';
7> }
tilldelad kanal: ch1
kanal ch1: sid=537 devtype=SBT_TAPE
kanal ch1: CommVault Systems for Oracle: Version 9.0.0(BUILD84)
Starting restore at 2011-08-03
frigjord kanal: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: restore-command failed at 08/03/2011 11:39:26
ORA-27191: sbtinfo2 returned an error
The spfile and control file exists.
RMAN>list backup of spfile
BS-nyckel Typ N Storlek Enhetstyp Tidsσtgσng Slutf÷randetid
------- ---- -- ---------- ----------- ------------ --------------
736698 Full 256.00K SBT_TAPE 00:00:04 2011-08-02
BP-nyckel: 736705 Status: AVAILABLE Komprimerad: NO Tagg: TAG2011080
2T181240
Handtag: dkmj0i8p_1_1 Media: V_73870
SPFILE har inkluderats: Σndringstid: 2011-08-02
View 5 Replies
View Related
Mar 14, 2012
How one should know whether RMAN is using target database control file or using separate catalog database. Also what one should do if he dont have catalog users credentials.
View 3 Replies
View Related
Jan 27, 2011
I have done many duplication before in sinlge instance databases using a backup tool and rman catalog. At the moment i was trying to do a RAC database duplication and facing some issues. For this i was doing a testing on my 1-node RAC. Primary and duplicated database is on the same Host and oracle version is 10.2.0.3. I perfomed following steps:
1.Created a DUPL database using DBCA.
2.Created a pfile using spfile.
3.Dropped all the datafiles, controlfiles and redo log files.
4.Started the database in nomount using pfile.
5.Disable cluster related parameters in pfile.
6.Took a full backup of the MAIN database with archivelog on disk.
6.Duplicate the database and it is done successfully.
7.Shutdown the instance and enabled cluster parameters.
8.Start instance using SRVCTL fails with error CRS-0215: Could not start resource 'ora.DUPL.DUPL1.inst'
But if start the instance using sqlplus it comes up nicely. There is not much information in alert log files.
View 13 Replies
View Related
Feb 7, 2011
I want to duplicate a prod database in to a dev db.I am using catalog database to connect to target and auxiliary datbase.I copied all backupsets to the local disk on Dev env in the correct path.For RMAN duplicate ,does the backuppeices need to be present on PROD filesystem as well or just DEV filesystem or both.
View 4 Replies
View Related
