Backup & Recovery :: Restoring Spfile And Control File To New Location?
Aug 3, 2011
Im trying to restore my spfile and (later controlfile) to a new location:
RMAN> connect catalog rman11cv/pwd@metarep
Connected...
RMAN> connect target
ansluten till msldatabasen: DATABASE (DBID=510270843)
RMAN> run
2> {
3> allocate channel ch1 type 'sbt_tape'
4> PARMS="BLKSIZE=262144,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1)"
5> TRACE 0;
6> Restore spfile to pfile 'y:
estorepfile.ora';
7> }
tilldelad kanal: ch1
kanal ch1: sid=537 devtype=SBT_TAPE
kanal ch1: CommVault Systems for Oracle: Version 9.0.0(BUILD84)
Starting restore at 2011-08-03
frigjord kanal: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: restore-command failed at 08/03/2011 11:39:26
ORA-27191: sbtinfo2 returned an error
The spfile and control file exists.
RMAN>list backup of spfile
BS-nyckel Typ N Storlek Enhetstyp Tidsσtgσng Slutf÷randetid
------- ---- -- ---------- ----------- ------------ --------------
736698 Full 256.00K SBT_TAPE 00:00:04 2011-08-02
BP-nyckel: 736705 Status: AVAILABLE Komprimerad: NO Tagg: TAG2011080
2T181240
Handtag: dkmj0i8p_1_1 Media: V_73870
SPFILE har inkluderats: Σndringstid: 2011-08-02
View 5 Replies
ADVERTISEMENT
Jun 26, 2012
I've pasted some of the results of an RMAN backup that I ran. It says that it's backing up both the Control File and the SPFILE, but it appears that only one file is being created. Is this correct? How does this work? Are both files combined into the C-3843121877-20120619-00 file?
Starting Control File and SPFILE Autobackup at 19-JUN-12
piece handle=C:ORACLEPRODUCT10.2.0DATABASEC-3843121877-20120619-00 comment=NONE
Finished Control File and SPFILE Autobackup at 19-JUN-12
Also, regarding the below configuration of RMAN - I can change this directory to whatever I want, correct? In other words, is it just the directory where I am putting the backup?
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:ORACLEPRODUCT10.2.0DATABASESNCFPLDG.ORA'; # default
View 2 Replies
View Related
Jul 11, 2012
I want to ask if I restore a control file from backup of say day2 and I recover till day1 using RMAN script, then what will be the state of my database? I mean day2 control file may be having SCN-Day2, and I am instructing RMAN to recover till past point in time that is SCN-Day1.
View 3 Replies
View Related
Jan 26, 2012
I have an oracle autoback of controlfile and spfile. I am trying to restore the production database using this backup, into a new server with a different directory structure.
I have completed the following steps in the restore process.
1. Creating a pfile from spfile
2. Changing the the location of cdump, udump, bdump and the control files ( there are three )
3. Then creating a spfile from this pfile
I am stuck on the next step where to rename all the datafiles and tempfile and restore the database. Following is what I did.
After mounting the database in RMAN, tried to run the following.
RMAN> run
2> {
3> allocate channel c1 device type disk
4> ;
5> @/home/oracle/rman_scripts/newloc.rman
6> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/dorian/system01.dbf';
7> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/dorian/undotbs01.dbf';
8> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/dorian/sysaux01.dbf';
9> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/dorian/users01.dbf';
[code]....
I am getting the following error message.
Starting restore at 25-JAN-2012 21:26:48
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2012 21:26:49
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 30
RMAN-06100: no channel to restore a backup or copy of datafile 29
RMAN-06100: no channel to restore a backup or copy of datafile 28
[code]....
View 14 Replies
View Related
Aug 29, 2010
I want to use rman to restore all my control files, I just did a level 0 incremental backup and ran the following script.
rman <<EOF
connect target sys/sys@GOLD_AUX
connect catalog rman/rman@GOLD_CAT
RUN
{
STARTUP FORCE NOMOUNT;
RESTORE CONTROLFILE;
ALTER DATABASE MOUNT;
ALTER DATABASE OPEN RESETLOGS;
}
EOF
My control files seem to be put back in the correct spot and suggest a way I can restore only my control files and have everything in sync with my datafiles.
end of out from rman script
====================
channel ORA_DISK_1: restore complete, elapsed time: 00:00:04
output filename=/oracle/data/aux/control01.ctl
output filename=/oracle/data/aux/control02.ctl
output filename=/oracle/data/aux/control03.ctl
Finished restore at 29-AUG-10
[code]...
View 6 Replies
View Related
Sep 27, 2011
Suppose I take a multi stream backup, say 3 streams.
So if a control file is backed up in say backup set 1, so is the whole control file is backed up in one backup piece or it may span multiple pieces?
A backup set may have multiple backup pieces.
View 2 Replies
View Related
Sep 18, 2012
On my stand by DB when I run the following command I get this error:
Is this line really needed based on my run block?
run
{
sql 'ALTER DATABASE BACKUP CONTROLFILE TO TRACE';
allocate channel t1 type 'SBT_TAPE'
[Code]....
View 4 Replies
View Related
Dec 13, 2011
This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
View 1 Replies
View Related
Apr 3, 2013
I am trying to backup my control on a STBBY DB(RAC) and I am getting the ollowing error.
ORA-00245: control file backup failed; target is likely on a local file system
what the issue is? Note the FS is ACFS and can see on all my nodes
show all;
using target database control file instead of recovery catalog
RMAN configuration parameters for database with db_unique_name PA01INS_IM3L059B are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
[code]...
ACFS file system
df -h /share/dbbkup/oracle/PA01INS/rman
Filesystem Size Used Avail Use% Mounted on
/dev/asm/pa01ins-33 75G 2.6G 73G 4% /share/dbbkup/oracle/PA01INS
rman cmdfile=control.rman
[code]...
View 2 Replies
View Related
Feb 10, 2011
I take hot backup of database at 10:00 am.After taking the hot backup 50 archived logs are created.Out of 50 i have backed up first 25 of them and at 5:00pm i lose complete database including control,data and the last 25 archived log files that were not backed up.So I am using latest hot backup to recover
I restore the control file backup and datafile backup taken during ho tbackup(10 am) and i issue the command
.......startup mount
>>>>>>>Recover database until cancel
!!!!!!! Apply the available 25 archive logs
then i give "cancel" since I dont have the next redo log .Now in which mode will the database open(Reset logs or no reset logs)
View 6 Replies
View Related
Dec 9, 2011
I want to restore control file from backup set,just as the flowing command,where location does the control file be restored to? how can i specify the location when restore control file?
restore controlfile from '/u01/rman_backup/mybak/df_768589733_7_1.bak';
View 2 Replies
View Related
May 28, 2012
taking the backup of a control file, as i am taking online backup, archive mode.
At first i have executed the statement
sql> alter database backup control file to trace;
then i have removed the control files and enterd some data in a table and committed it.As my oracle is not shutting down, so i shut aborted it. Now after saving the last file from the udump as obkp.sql i am unable to edit this file and use.
how to edit and use this file, so that i can startup my database normally.
View 4 Replies
View Related
Jan 5, 2012
When i issue this command ,how many times to backup controlfile?
RMAN> BACKUP CURRENT CONTROLFILE INCLUDE CURRENT CONTROLFILE;
Is there difference between 'BACKUP CURRENT CONTROLFILE INCLUDE CURRENT CONTROLFILE' and 'BACKUP CURRENT CONTROLFILE'?
View 2 Replies
View Related
Dec 2, 2011
I've recently moved jobs and am doing a lot of the normal things getting familiar with my new company's databases.I was checking through our production backup logs and came across something that looks a little funny. From the last two days backups, I see:
select completion_time, marked_corrupt, media_corrupt, logically_corrupt
from v$backup_datafile
where controlfile_type = 'B'
order by completion_time desc
COMPLETION_TIME MARKED_CORRUPT MEDIA_CORRUPT LOGICALLY_CORRUPT
01/12/2011 11:27:252011 1201 2
01/12/2011 11:26:180 0 0
01/12/2011 11:25:242011 1201 1
01/12/2011 11:15:562011 1201 0
01/12/2011 01:40:100 0 0
30/11/2011 11:23:482011 1130 2
30/11/2011 11:22:440 0 0
30/11/2011 11:21:562011 1130 1
30/11/2011 11:13:002011 1130 0
30/11/2011 01:41:010 0 0
The 01:40 record will come from our nightly command:
BACKUP INCREMENTAL LEVEL=0 FILESPERSET=20 FORMAT 'full_%d_%t_%s_%p'
DATABASE INCLUDE CURRENT CONTROLFILE
The 11AM records will come from the command:
BACKUP INCREMENTAL LEVEL=0 FORMAT 'ctl_%t_%s_%p' CURRENT CONTROLFILE;
(I know backups shouldn't still be running at 11am and we don't need level 0 backups every night, that's a seperate issue I'll be addressing! ) I see there's been a similar entry here in v$backup_datafile for all backups that there's records for. The database is up and running just fine. There are no unusual errors being reported by the database in OEM or the alert log.I tried looking at both our control files (yes, should have 3 - something else I've listed to change!) with dbverify which showed no issues - though I'm not sure if this is designed to work with control files.
If so, how could I confirm whether it's an issue with a specific controlfile (I'm assuming it's not an issue with the backup to tape itself, as it's reporting the same corruption every day)?I'd obviously like to diagnose this now while the db is up and running, rather than at 4am some morning during a crash and finding out my backup control files are no good!
View 10 Replies
View Related
Aug 1, 2012
I need to restore entire database(sp+control+datafile) to new host.I have started the instance with nomount( and it has created a dummy parameter file).Now, I need to fire the command to restore spfile.
RUN
{
ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='...';
RESTORE SPFILE TO PFILE '?/oradata/test/inittrgta.ora' FROM AUTOBACKUP;
SHUTDOWN ABORT;
}
My questions:-
1.How will RMAN find the location of backupset(Since there is controlfile for neither target or catalog database)?
2.How does RMAN reache the backupset in case of a)tape b)disk?
View 4 Replies
View Related
Dec 7, 2012
We're running 10.2.0.4 Database on AIX with no catalog Database.We keep all the backup info in controlfiles only.When we do that backup, we're able to successfully back it up (including archivelogs). But I'm unable to find any records in the controlfiles.
SQL> select * from V$BACKUP_SET;
no rows selected
and
SQL> sho parameter control
NAME TYPE VALUE
------------------------------------ ------------------------------
control_file_record_keep_time integer 14
View 13 Replies
View Related
May 17, 2012
In order for the following command to work:
> recover database using backup control file until cancel;
what command must precede it, is it:
> alter database backup control file to trace;
View 4 Replies
View Related
Oct 22, 2013
I want to create binary copy of control file every time I do backup. I am using sql "alter database backup controlfile to ''+FRADG/TESTDB/controlfile/controlfile.ctl'' "; in my rman backup script. If I run it second time I got errors as it does does not allow to overwrite existing one.
View 5 Replies
View Related
Oct 3, 2011
I have restored all datafile to new location (that is ASM) earlier it was on file system using set new name command (RMAN). Now when i'm trying to update control file with swicth command it is prompting error. Version is 11g R2.
RMAN> SWITCH DATAFILE ALL;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "all": expecting one of: "double-quoted-string, integer, single-quoted-string"
RMAN-01007: at line 1 column 17 file: standard input
View 3 Replies
View Related
Aug 7, 2012
I've read a lot about the different types of backup available with Oracle (hot and cold backup). However, I was thinking of a different way of performing this task. I'm currently using Windows Server 2008 R2 and Oracle 11g Standard Edition. I'd like to schedule an entire backup of my server via the utility "Windows Server Backup" (available for free).That way, I could recover my entire server with all the programs and files in case the latter crashes.I'm wondering if this solution could be used as a way of backing up (and recovering) the Oracle database. Should I still set up a regular hot backup with the Archivelog mode enabled in case some operations/transactions were being done at the time of the crash (for the data integrity)?
View 2 Replies
View Related
May 9, 2011
We are trying to restore a database to a cold backup DBID.However while our datafiles were backuped up for 6 months retention we found out subsequent delete obsolete command wiped out the Control file related to this backup piece..Now what is left with this backup piece is just datafiles..
Can we still recover the database with a subsequent controlfile autobackup for the same DBID.?
View 2 Replies
View Related
Mar 8, 2013
Every Sunday in the month - Full Backup
RMAN > BACKUP DATABASE;
Rest of the days - Incremental Level 1 Backup.
RMAN> BACKUP INCREMENTAL LEVEL 1 DATABASE
Day of Month Backup Taken Backup Contents
1st Full Backup All files as of the 1st - Sunday
2nd Incremental #1 Files updates between the 1st and 2nd - Monday
3rd Incremental #2 Files updates between the 2nd and 3rd - Tuesday
4th Incremental #3 Files updates between the 3rd and 4th - Wednesday
5th Incremental #4 Files updates between the 4th and 5th - Thrusday
6th Incremental #6 Files updates between the 5th and 6th - Friday
7th Incremental #7 Files updates between the 6th and 7th - Saturday
8th Full Backup #8 Files updates from 1st,2nd to 7th - Sunday
9th Incremental #9 Files updates between the 8th and 9th _ Monday
10th Incremental #10Files updates between the 9th and 10th - Tuesday
11th Incremental #11 Files updates between the 10th and 11th - Wednesday
12th Incremental #12 Files updates between the 11th and 12th - Thrusday
13th Incremental #13 Files updates between the 12th and 13th - Friday
14th Incremental #14 Files updates between the 13th and 14th - Saturday
15th Full Backup CRASHES - NOT COMPLETED - Sunday
I would need to restore now from #8 ( full backup ) and #9 to #14 ( incremental backup )
Tell me the "restore command" to achieve the output?
View 6 Replies
View Related
May 12, 2011
Can the control file be used to store scripts which are used to perform backups? I know the RMAN recovery catalog can.
Does the SHOW command display detailed reporting on the RMAN catalog contents other than configuration information?
View 1 Replies
View Related
Mar 29, 2011
I've got a legacy SAP system with oracle 8i on Tru64. No changes at all are made but for legal reasons we have to keep it up and running.
we currently do a full backup monthly by shutting down oracle and doing a backup of all the files to tape and that takes around 12 hours.
If I stop doing the full backup and I only backup the control file and the archived redo log files every month and I had to restore the full database years from now, would I be able to restore the database using the last full monthly backup and use the latest control file and archived redo log files?
View 5 Replies
View Related
Dec 8, 2011
Just inherited an 8i DB that is being backed up with then common techniques used prior to RMAN. The tablespace is placed in backup mode, an OS copy of the file is taken, the tablespace is returned online, and the process is repeated until all files captured in an usable state.
It is running in archive log mode on a Linux OS and daily backups are initiated through crontab as well as jobs to purge the redo logs after backup. Backup storage recently filled - working since 2004. Not bad!
I have documented procedures for using these files with an operational 8i DB. Will I be able to restore these files directly into an 11g environment? What is the implication of 8i having DBA managed "RBS" (roll back segments) vs. 11g?
I am thinking I will have to build both versions.
View 7 Replies
View Related
Mar 31, 2011
i am trying to restore database using rman backup on same machine using command
RMAN> run {
2> set until sequence 23;
3> restore database;
4> recover database;
5> }
but it will give me error.
RMAN-00571: =======================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===========
RMAN-00571: =======================================================
RMAN-03002: failure of restore command at 03/31/2011 19:18:11
[code]....
View 3 Replies
View Related
May 10, 2011
I have a live server on which Oracle 10g Database is running. We take full RMAN Backups everyday. Now we want to restore the RMAN Backup file from the Live server to another machine (which is going to be a test system). I want to restore the latest RMAN backup on the test machine (which is not on network).
When I copy the RMAN backup set in the flash recovery area of the test machine and then use "list backup", the backup set is not listed. I also tried "crosscheck backup" and then "list backup" but still the backup set does not appear. how can I register the backup set from live server into test machine and then restore it.
View 5 Replies
View Related
Sep 4, 2013
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
View 6 Replies
View Related
Jun 1, 2012
What is the default location for the Rman backup ORACLE_HOMEdbs is it correct?
View 1 Replies
View Related
Oct 24, 2013
Database: 11gEBS: 12.1.3O/S: Solaris Sparc 64 bits
Problem Description: Cloning from Source instance A to target instance B and both are in ASM instances.RMAN backup in source instance A is completed, which has spfile configured in non-default location in ASM for example,see belowASMCMD
[+ASMDG003/TEST1 > ls -ltType Redund Striped Time Sys Name Y TEMPFILE/ Y ONLINELOG/ Y DATAFILE/ Y CONTROLFILE/ N spfiletest1.ora => +ASMDG003/TEST1/PARAMETERFILE/SPFILE.747.856347
Also, there is no SPFILE in $ORACLE_HOME/dbs for the TEST1 source instance. INITTEST1.ora file has the following entry:
cat INITTEST1. oraspfile='+ ASMD G003 /TEST1/spfileTEST1.ora'
Question: In the target instance to be cloned from RMAN backup fro source instance TEST1, on performing ' restore spfile from autobackup 'location';Will the spfile be restored in $ORACLE_HOME/dbs in the target instance TEST2?
View 6 Replies
View Related
