Suppose I take a multi stream backup, say 3 streams.
So if a control file is backed up in say backup set 1, so is the whole control file is backed up in one backup piece or it may span multiple pieces?
A backup set may have multiple backup pieces.
Is this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
I want to ask if I restore a control file from backup of say day2 and I recover till day1 using RMAN script, then what will be the state of my database? I mean day2 control file may be having SCN-Day2, and I am instructing RMAN to recover till past point in time that is SCN-Day1.
View 3 Replies View RelatedOn my stand by DB when I run the following command I get this error:
Is this line really needed based on my run block?
run
{
sql 'ALTER DATABASE BACKUP CONTROLFILE TO TRACE';
allocate channel t1 type 'SBT_TAPE'
[Code]....
This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I have an oracle autoback of controlfile and spfile. I am trying to restore the production database using this backup, into a new server with a different directory structure.
I have completed the following steps in the restore process.
1. Creating a pfile from spfile
2. Changing the the location of cdump, udump, bdump and the control files ( there are three )
3. Then creating a spfile from this pfile
I am stuck on the next step where to rename all the datafiles and tempfile and restore the database. Following is what I did.
After mounting the database in RMAN, tried to run the following.
RMAN> run
2> {
3> allocate channel c1 device type disk
4> ;
5> @/home/oracle/rman_scripts/newloc.rman
6> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/dorian/system01.dbf';
7> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/dorian/undotbs01.dbf';
8> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/dorian/sysaux01.dbf';
9> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/dorian/users01.dbf';
[code]....
I am getting the following error message.
Starting restore at 25-JAN-2012 21:26:48
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2012 21:26:49
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 30
RMAN-06100: no channel to restore a backup or copy of datafile 29
RMAN-06100: no channel to restore a backup or copy of datafile 28
[code]....
I am trying to backup my control on a STBBY DB(RAC) and I am getting the ollowing error.
ORA-00245: control file backup failed; target is likely on a local file system
what the issue is? Note the FS is ACFS and can see on all my nodes
show all;
using target database control file instead of recovery catalog
RMAN configuration parameters for database with db_unique_name PA01INS_IM3L059B are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
[code]...
ACFS file system
df -h /share/dbbkup/oracle/PA01INS/rman
Filesystem Size Used Avail Use% Mounted on
/dev/asm/pa01ins-33 75G 2.6G 73G 4% /share/dbbkup/oracle/PA01INS
rman cmdfile=control.rman
[code]...
I take hot backup of database at 10:00 am.After taking the hot backup 50 archived logs are created.Out of 50 i have backed up first 25 of them and at 5:00pm i lose complete database including control,data and the last 25 archived log files that were not backed up.So I am using latest hot backup to recover
I restore the control file backup and datafile backup taken during ho tbackup(10 am) and i issue the command
.......startup mount
>>>>>>>Recover database until cancel
!!!!!!! Apply the available 25 archive logs
then i give "cancel" since I dont have the next redo log .Now in which mode will the database open(Reset logs or no reset logs)
I want to restore control file from backup set,just as the flowing command,where location does the control file be restored to? how can i specify the location when restore control file?
restore controlfile from '/u01/rman_backup/mybak/df_768589733_7_1.bak';
taking the backup of a control file, as i am taking online backup, archive mode.
At first i have executed the statement
sql> alter database backup control file to trace;
then i have removed the control files and enterd some data in a table and committed it.As my oracle is not shutting down, so i shut aborted it. Now after saving the last file from the udump as obkp.sql i am unable to edit this file and use.
how to edit and use this file, so that i can startup my database normally.
When i issue this command ,how many times to backup controlfile?
RMAN> BACKUP CURRENT CONTROLFILE INCLUDE CURRENT CONTROLFILE;
Is there difference between 'BACKUP CURRENT CONTROLFILE INCLUDE CURRENT CONTROLFILE' and 'BACKUP CURRENT CONTROLFILE'?
I am trying to backup my entire database's files :
[oracle@testing-oracle-1 ~]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Mon Jun 24 16:09:54 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID=1341263457)
RMAN> list backup;
using target database control file instead of recovery catalog specification does not match any backup in the repository
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT
FOR DEVICE TYPE DISK TO '/u01/app/oracle/backupsets/control_files/cf_%F.BCKP';2>
[code]....
I see that a backup set was created to "/u01/app/oracle/flash_recovery_area/ORCL/backupset/2013_06_24/" , in spite of my specification.
So I asked RMAN to list all the backups I have:
RMAN> list backup;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
1 41.14M DISK 00:00:00 24-JUN-13
BP Key: 1 Status: AVAILABLE Compressed: NO Tag: TAG20130624T161025
Piece Name: /u01/app/oracle/backupsets/818957425_1_%r.BCKP
[code]....
Here I see that 4 backup sets have been created.The backup sets 1 & 3 containing the archived redo logs (818957425_1_%r.BCKP and 818957451_3_%r.BCKP) are placed as I wanted in /u01/app/oracle/backupsets/ dir.
The file containing the Control File and Spfile (cf_c-1341263457-20130624-00.BCKP) is placed as I wanted in /u01/app/oracle/backupsets/control_files/ dir.However, The backup set file containing the data files(o1_mf_nnnd0_TAG20130624T161026_8wjkb2tg_.bkp) is placed under the directory /u01/app/oracle/flash_recovery_area/ORCL/backupset/2013_06_24/ ,and I don't understand why.
When I backup my database without the archived redo logs - it is saved correctly:
RMAN>
RMAN> delete backup;
using channel ORA_DISK_1
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
[code]....
1. Why aren't my data files backed up to the location I specified when I backup using PLUS ARCHIVELOG syntax?
2. Why are my redo logs saved to two different backup sets and not just one?
3. Is there a way to combine backup of all files (data files, control file, spfile, redo logs & arch redo's) in one backup set, one file?
I've recently moved jobs and am doing a lot of the normal things getting familiar with my new company's databases.I was checking through our production backup logs and came across something that looks a little funny. From the last two days backups, I see:
select completion_time, marked_corrupt, media_corrupt, logically_corrupt
from v$backup_datafile
where controlfile_type = 'B'
order by completion_time desc
COMPLETION_TIME MARKED_CORRUPT MEDIA_CORRUPT LOGICALLY_CORRUPT
01/12/2011 11:27:252011 1201 2
01/12/2011 11:26:180 0 0
01/12/2011 11:25:242011 1201 1
01/12/2011 11:15:562011 1201 0
01/12/2011 01:40:100 0 0
30/11/2011 11:23:482011 1130 2
30/11/2011 11:22:440 0 0
30/11/2011 11:21:562011 1130 1
30/11/2011 11:13:002011 1130 0
30/11/2011 01:41:010 0 0
The 01:40 record will come from our nightly command:
BACKUP INCREMENTAL LEVEL=0 FILESPERSET=20 FORMAT 'full_%d_%t_%s_%p'
DATABASE INCLUDE CURRENT CONTROLFILE
The 11AM records will come from the command:
BACKUP INCREMENTAL LEVEL=0 FORMAT 'ctl_%t_%s_%p' CURRENT CONTROLFILE;
(I know backups shouldn't still be running at 11am and we don't need level 0 backups every night, that's a seperate issue I'll be addressing! ) I see there's been a similar entry here in v$backup_datafile for all backups that there's records for. The database is up and running just fine. There are no unusual errors being reported by the database in OEM or the alert log.I tried looking at both our control files (yes, should have 3 - something else I've listed to change!) with dbverify which showed no issues - though I'm not sure if this is designed to work with control files.
If so, how could I confirm whether it's an issue with a specific controlfile (I'm assuming it's not an issue with the backup to tape itself, as it's reporting the same corruption every day)?I'd obviously like to diagnose this now while the db is up and running, rather than at 4am some morning during a crash and finding out my backup control files are no good!
We're running 10.2.0.4 Database on AIX with no catalog Database.We keep all the backup info in controlfiles only.When we do that backup, we're able to successfully back it up (including archivelogs). But I'm unable to find any records in the controlfiles.
SQL> select * from V$BACKUP_SET;
no rows selected
and
SQL> sho parameter control
NAME TYPE VALUE
------------------------------------ ------------------------------
control_file_record_keep_time integer 14
I've pasted some of the results of an RMAN backup that I ran. It says that it's backing up both the Control File and the SPFILE, but it appears that only one file is being created. Is this correct? How does this work? Are both files combined into the C-3843121877-20120619-00 file?
Starting Control File and SPFILE Autobackup at 19-JUN-12
piece handle=C:ORACLEPRODUCT10.2.0DATABASEC-3843121877-20120619-00 comment=NONE
Finished Control File and SPFILE Autobackup at 19-JUN-12
Also, regarding the below configuration of RMAN - I can change this directory to whatever I want, correct? In other words, is it just the directory where I am putting the backup?
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:ORACLEPRODUCT10.2.0DATABASESNCFPLDG.ORA'; # default
Im trying to restore my spfile and (later controlfile) to a new location:
RMAN> connect catalog rman11cv/pwd@metarep
Connected...
RMAN> connect target
ansluten till msldatabasen: DATABASE (DBID=510270843)
RMAN> run
2> {
3> allocate channel ch1 type 'sbt_tape'
4> PARMS="BLKSIZE=262144,ENV=(CV_mmsApiVsn=2,CV_channelPar=ch1)"
5> TRACE 0;
6> Restore spfile to pfile 'y:
estorepfile.ora';
7> }
tilldelad kanal: ch1
kanal ch1: sid=537 devtype=SBT_TAPE
kanal ch1: CommVault Systems for Oracle: Version 9.0.0(BUILD84)
Starting restore at 2011-08-03
frigjord kanal: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: restore-command failed at 08/03/2011 11:39:26
ORA-27191: sbtinfo2 returned an error
The spfile and control file exists.
RMAN>list backup of spfile
BS-nyckel Typ N Storlek Enhetstyp Tidsσtgσng Slutf÷randetid
------- ---- -- ---------- ----------- ------------ --------------
736698 Full 256.00K SBT_TAPE 00:00:04 2011-08-02
BP-nyckel: 736705 Status: AVAILABLE Komprimerad: NO Tagg: TAG2011080
2T181240
Handtag: dkmj0i8p_1_1 Media: V_73870
SPFILE har inkluderats: Σndringstid: 2011-08-02
In order for the following command to work:
> recover database using backup control file until cancel;
what command must precede it, is it:
> alter database backup control file to trace;
I want to create binary copy of control file every time I do backup. I am using sql "alter database backup controlfile to ''+FRADG/TESTDB/controlfile/controlfile.ctl'' "; in my rman backup script. If I run it second time I got errors as it does does not allow to overwrite existing one.
View 5 Replies View RelatedI have restored all datafile to new location (that is ASM) earlier it was on file system using set new name command (RMAN). Now when i'm trying to update control file with swicth command it is prompting error. Version is 11g R2.
RMAN> SWITCH DATAFILE ALL;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "all": expecting one of: "double-quoted-string, integer, single-quoted-string"
RMAN-01007: at line 1 column 17 file: standard input
I faced one strange behaviour of rman backup after adding new file system for datafiles . I have OMF datafiles . 4 days ago i had only one file system /data01 and my DB_CREATE_FILE_DEST is set to /data01. my rman backup was creating 14 to 15 bacup pieces with parallelism 5 . which is normal with 84 datafiles .Now i added one more file system /data02 . but after adding this file system rman backup is creating so many backup-pieces around (40-45) with same rman configuration . nothing changes at rman script .
View 3 Replies View RelatedI am having a issue, we are trying to restore our db from control files using Symantec Backup exec, but job fails giving me error go to table spaces select all table spaces and unchecked roll forward.
i am unable to find way to uncheck the table spaces. Here is the complete description.
Cause
The system catalog tablespace "syscatspace" contains all of the system catalog information for the tables. Syscatspace needs to be rolled forward first, and then the other tablespaces must be rolled forward.
Solution
Workaround:
When the restore operation is run from a tablespace level backup, perform the rollforward for the syscatspace tablespace first and then for other tablespaces.
Execute the rollforward operation as a DBA operation. The sequence of the recovery process should be as follows:
1. Select all tablespaces, uncheck the rollforward option and run the restore job.
2. Run the rollforward operation as a DBA initiated operation:
rollforward syscatspace to point in time / end of logs. e.g. db2 => rollforward database UEXIT to end of logs and complete Tablespace (SYSCATSPACE) online
3. Perform rollforward of all other tablespaces.
e.g. db2 => rollforward database UEXIT to end of logs and complete tablespace (SYSTOO LSPACE,USERSPACE1) online
Refer to IBM DB2 documentation for more information on DBA-initiated operations.
We are trying to restore a database to a cold backup DBID.However while our datafiles were backuped up for 6 months retention we found out subsequent delete obsolete command wiped out the Control file related to this backup piece..Now what is left with this backup piece is just datafiles..
Can we still recover the database with a subsequent controlfile autobackup for the same DBID.?
Can the control file be used to store scripts which are used to perform backups? I know the RMAN recovery catalog can.
Does the SHOW command display detailed reporting on the RMAN catalog contents other than configuration information?
I've got a legacy SAP system with oracle 8i on Tru64. No changes at all are made but for legal reasons we have to keep it up and running.
we currently do a full backup monthly by shutting down oracle and doing a backup of all the files to tape and that takes around 12 hours.
If I stop doing the full backup and I only backup the control file and the archived redo log files every month and I had to restore the full database years from now, would I be able to restore the database using the last full monthly backup and use the latest control file and archived redo log files?
Is it possible to un-delete the deleted backup pieces, then catalog them to RMAN?
ob> lsvol contents vid GENERIC-000138
VOID OOID Seq Volume ID Barcode Family Created Attributes
533 533 28 GENERIC-000138 PCC204L2 GENERIC 2010/11/12 never closes; content manages reuse
BSOID File Sect Level Host Size Created Attributes
4254 277 2 0 oraserv 14.8 GB 2012/03/31 deleted
4255 278 1 0 oraserv 57.7 GB 2012/03/31 deleted
4256 279 1 0 oraserv 54.2 GB 2012/03/31 deleted
4257 280 1 0 oraserv 62.3 GB 2012/03/31 deleted
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View RelatedI am designing the scripts for RMAN backup.
Currently we have 14 days retention policy for daily and weekly backup. but we will have 186days retention for monthly backup, that's mean its should be recoverable around that 3 month (for monthly).
My question is, What should I put the scripts for monthly backup ?
I saw some example its for offline backup:
BACKUP DATABASE UNTIL 'SYSDATE+365' NOLOGS;
But I want the backup should be online ?
Currently our weekly backup like this
#!/bin/bash
# SID= env | grep ORACLE_SID | cut -c12-15
export ORACLE_HOME=/oracle/BWD/112_64
export ORACLE_SID=BWD
LOGFILE=/tmp/BWD-weekly-`date +%y%m%d%H%M`.out
[code].......
And Daily backup:
#!/bin/bash
SID=EPD
export ORACLE_HOME=/oracle/$SID/112_64
export ORACLE_SID=$SID
#LOGFILE=/tmp/EPD-weekly-`date +%y%m%d%H%M`.out
LOGFILE=/tmp/$SID-daily-`date +%y%m%d%H%M`.out
echo>> $LOGFILE
[code]......
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
How can be identify a particular archive-log file have backup or not from rman catalog?
View 2 Replies View Related
