Backup & Recovery :: Restoring Later Backup Control File And Recovering Till Past Scn
Jul 11, 2012
I want to ask if I restore a control file from backup of say day2 and I recover till day1 using RMAN script, then what will be the state of my database? I mean day2 control file may be having SCN-Day2, and I am instructing RMAN to recover till past point in time that is SCN-Day1.
run { CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F'; CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS; sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I have an oracle autoback of controlfile and spfile. I am trying to restore the production database using this backup, into a new server with a different directory structure.
I have completed the following steps in the restore process.
1. Creating a pfile from spfile
2. Changing the the location of cdump, udump, bdump and the control files ( there are three )
3. Then creating a spfile from this pfile
I am stuck on the next step where to rename all the datafiles and tempfile and restore the database. Following is what I did.
After mounting the database in RMAN, tried to run the following.
RMAN> run 2> { 3> allocate channel c1 device type disk 4> ; 5> @/home/oracle/rman_scripts/newloc.rman 6> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/dorian/system01.dbf'; 7> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/dorian/undotbs01.dbf'; 8> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/dorian/sysaux01.dbf'; 9> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/dorian/users01.dbf';
[code]....
I am getting the following error message.
Starting restore at 25-JAN-2012 21:26:48 released channel: c1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 01/25/2012 21:26:49 RMAN-06026: some targets not found - aborting restore RMAN-06100: no channel to restore a backup or copy of datafile 30 RMAN-06100: no channel to restore a backup or copy of datafile 29 RMAN-06100: no channel to restore a backup or copy of datafile 28
I am trying to backup my control on a STBBY DB(RAC) and I am getting the ollowing error.
ORA-00245: control file backup failed; target is likely on a local file system
what the issue is? Note the FS is ACFS and can see on all my nodes
show all; using target database control file instead of recovery catalog RMAN configuration parameters for database with db_unique_name PA01INS_IM3L059B are: CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default CONFIGURE BACKUP OPTIMIZATION OFF; # default
[code]...
ACFS file system
df -h /share/dbbkup/oracle/PA01INS/rman Filesystem Size Used Avail Use% Mounted on /dev/asm/pa01ins-33 75G 2.6G 73G 4% /share/dbbkup/oracle/PA01INS rman cmdfile=control.rman
I take hot backup of database at 10:00 am.After taking the hot backup 50 archived logs are created.Out of 50 i have backed up first 25 of them and at 5:00pm i lose complete database including control,data and the last 25 archived log files that were not backed up.So I am using latest hot backup to recover
I restore the control file backup and datafile backup taken during ho tbackup(10 am) and i issue the command
.......startup mount >>>>>>>Recover database until cancel !!!!!!! Apply the available 25 archive logs
then i give "cancel" since I dont have the next redo log .Now in which mode will the database open(Reset logs or no reset logs)
I want to restore control file from backup set,just as the flowing command,where location does the control file be restored to? how can i specify the location when restore control file?
restore controlfile from '/u01/rman_backup/mybak/df_768589733_7_1.bak';
taking the backup of a control file, as i am taking online backup, archive mode.
At first i have executed the statement
sql> alter database backup control file to trace;
then i have removed the control files and enterd some data in a table and committed it.As my oracle is not shutting down, so i shut aborted it. Now after saving the last file from the udump as obkp.sql i am unable to edit this file and use.
how to edit and use this file, so that i can startup my database normally.
I've read a lot about the different types of backup available with Oracle (hot and cold backup). However, I was thinking of a different way of performing this task. I'm currently using Windows Server 2008 R2 and Oracle 11g Standard Edition. I'd like to schedule an entire backup of my server via the utility "Windows Server Backup" (available for free).That way, I could recover my entire server with all the programs and files in case the latter crashes.I'm wondering if this solution could be used as a way of backing up (and recovering) the Oracle database. Should I still set up a regular hot backup with the Archivelog mode enabled in case some operations/transactions were being done at the time of the crash (for the data integrity)?
2nd Incremental #1 Files updates between the 1st and 2nd - Monday 3rd Incremental #2 Files updates between the 2nd and 3rd - Tuesday 4th Incremental #3 Files updates between the 3rd and 4th - Wednesday 5th Incremental #4 Files updates between the 4th and 5th - Thrusday 6th Incremental #6 Files updates between the 5th and 6th - Friday 7th Incremental #7 Files updates between the 6th and 7th - Saturday 8th Full Backup #8 Files updates from 1st,2nd to 7th - Sunday 9th Incremental #9 Files updates between the 8th and 9th _ Monday 10th Incremental #10Files updates between the 9th and 10th - Tuesday 11th Incremental #11 Files updates between the 10th and 11th - Wednesday 12th Incremental #12 Files updates between the 11th and 12th - Thrusday 13th Incremental #13 Files updates between the 12th and 13th - Friday 14th Incremental #14 Files updates between the 13th and 14th - Saturday 15th Full Backup CRASHES - NOT COMPLETED - Sunday
I would need to restore now from #8 ( full backup ) and #9 to #14 ( incremental backup )
Tell me the "restore command" to achieve the output?
Just inherited an 8i DB that is being backed up with then common techniques used prior to RMAN. The tablespace is placed in backup mode, an OS copy of the file is taken, the tablespace is returned online, and the process is repeated until all files captured in an usable state.
It is running in archive log mode on a Linux OS and daily backups are initiated through crontab as well as jobs to purge the redo logs after backup. Backup storage recently filled - working since 2004. Not bad!
I have documented procedures for using these files with an operational 8i DB. Will I be able to restore these files directly into an 11g environment? What is the implication of 8i having DBA managed "RBS" (roll back segments) vs. 11g?
I've recently moved jobs and am doing a lot of the normal things getting familiar with my new company's databases.I was checking through our production backup logs and came across something that looks a little funny. From the last two days backups, I see:
select completion_time, marked_corrupt, media_corrupt, logically_corrupt from v$backup_datafile where controlfile_type = 'B' order by completion_time desc
The 01:40 record will come from our nightly command:
BACKUP INCREMENTAL LEVEL=0 FILESPERSET=20 FORMAT 'full_%d_%t_%s_%p' DATABASE INCLUDE CURRENT CONTROLFILE
The 11AM records will come from the command:
BACKUP INCREMENTAL LEVEL=0 FORMAT 'ctl_%t_%s_%p' CURRENT CONTROLFILE;
(I know backups shouldn't still be running at 11am and we don't need level 0 backups every night, that's a seperate issue I'll be addressing! ) I see there's been a similar entry here in v$backup_datafile for all backups that there's records for. The database is up and running just fine. There are no unusual errors being reported by the database in OEM or the alert log.I tried looking at both our control files (yes, should have 3 - something else I've listed to change!) with dbverify which showed no issues - though I'm not sure if this is designed to work with control files.
If so, how could I confirm whether it's an issue with a specific controlfile (I'm assuming it's not an issue with the backup to tape itself, as it's reporting the same corruption every day)?I'd obviously like to diagnose this now while the db is up and running, rather than at 4am some morning during a crash and finding out my backup control files are no good!
I want to use rman to restore all my control files, I just did a level 0 incremental backup and ran the following script.
rman <<EOF connect target sys/sys@GOLD_AUX connect catalog rman/rman@GOLD_CAT RUN { STARTUP FORCE NOMOUNT; RESTORE CONTROLFILE; ALTER DATABASE MOUNT; ALTER DATABASE OPEN RESETLOGS; } EOF
My control files seem to be put back in the correct spot and suggest a way I can restore only my control files and have everything in sync with my datafiles.
We're running 10.2.0.4 Database on AIX with no catalog Database.We keep all the backup info in controlfiles only.When we do that backup, we're able to successfully back it up (including archivelogs). But I'm unable to find any records in the controlfiles.
SQL> select * from V$BACKUP_SET;
no rows selected
and
SQL> sho parameter control
NAME TYPE VALUE ------------------------------------ ------------------------------ control_file_record_keep_time integer 14
I've pasted some of the results of an RMAN backup that I ran. It says that it's backing up both the Control File and the SPFILE, but it appears that only one file is being created. Is this correct? How does this work? Are both files combined into the C-3843121877-20120619-00 file?
Starting Control File and SPFILE Autobackup at 19-JUN-12 piece handle=C:ORACLEPRODUCT10.2.0DATABASEC-3843121877-20120619-00 comment=NONE Finished Control File and SPFILE Autobackup at 19-JUN-12
Also, regarding the below configuration of RMAN - I can change this directory to whatever I want, correct? In other words, is it just the directory where I am putting the backup?
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:ORACLEPRODUCT10.2.0DATABASESNCFPLDG.ORA'; # default
I want to create binary copy of control file every time I do backup. I am using sql "alter database backup controlfile to ''+FRADG/TESTDB/controlfile/controlfile.ctl'' "; in my rman backup script. If I run it second time I got errors as it does does not allow to overwrite existing one.
I have restored all datafile to new location (that is ASM) earlier it was on file system using set new name command (RMAN). Now when i'm trying to update control file with swicth command it is prompting error. Version is 11g R2.
RMAN> SWITCH DATAFILE ALL;
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00558: error encountered while parsing input commands RMAN-01009: syntax error: found "all": expecting one of: "double-quoted-string, integer, single-quoted-string" RMAN-01007: at line 1 column 17 file: standard input
I am having a issue, we are trying to restore our db from control files using Symantec Backup exec, but job fails giving me error go to table spaces select all table spaces and unchecked roll forward.
i am unable to find way to uncheck the table spaces. Here is the complete description.
Cause
The system catalog tablespace "syscatspace" contains all of the system catalog information for the tables. Syscatspace needs to be rolled forward first, and then the other tablespaces must be rolled forward.
Solution
Workaround:
When the restore operation is run from a tablespace level backup, perform the rollforward for the syscatspace tablespace first and then for other tablespaces.
Execute the rollforward operation as a DBA operation. The sequence of the recovery process should be as follows:
1. Select all tablespaces, uncheck the rollforward option and run the restore job. 2. Run the rollforward operation as a DBA initiated operation:
rollforward syscatspace to point in time / end of logs. e.g. db2 => rollforward database UEXIT to end of logs and complete Tablespace (SYSCATSPACE) online
3. Perform rollforward of all other tablespaces.
e.g. db2 => rollforward database UEXIT to end of logs and complete tablespace (SYSTOO LSPACE,USERSPACE1) online
Refer to IBM DB2 documentation for more information on DBA-initiated operations.
We are trying to restore a database to a cold backup DBID.However while our datafiles were backuped up for 6 months retention we found out subsequent delete obsolete command wiped out the Control file related to this backup piece..Now what is left with this backup piece is just datafiles..
Can we still recover the database with a subsequent controlfile autobackup for the same DBID.?
I've got a legacy SAP system with oracle 8i on Tru64. No changes at all are made but for legal reasons we have to keep it up and running.
we currently do a full backup monthly by shutting down oracle and doing a backup of all the files to tape and that takes around 12 hours.
If I stop doing the full backup and I only backup the control file and the archived redo log files every month and I had to restore the full database years from now, would I be able to restore the database using the last full monthly backup and use the latest control file and archived redo log files?
i am trying to restore database using rman backup on same machine using command
RMAN> run { 2> set until sequence 23; 3> restore database; 4> recover database; 5> } but it will give me error. RMAN-00571: ======================================================= RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =========== RMAN-00571: ======================================================= RMAN-03002: failure of restore command at 03/31/2011 19:18:11 [code]....
I have a live server on which Oracle 10g Database is running. We take full RMAN Backups everyday. Now we want to restore the RMAN Backup file from the Live server to another machine (which is going to be a test system). I want to restore the latest RMAN backup on the test machine (which is not on network).
When I copy the RMAN backup set in the flash recovery area of the test machine and then use "list backup", the backup set is not listed. I also tried "crosscheck backup" and then "list backup" but still the backup set does not appear. how can I register the backup set from live server into test machine and then restore it.
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26 BR0505I Full database backup (level 0) using RMAN successful BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba mankp_acressit.bat D:>rman catalog rman/******@acressit target / cmd file=E:sgdba mankp_arch.rcv log E:sgdba mansit_arch_rman_backup.log RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-00556: could not open CMDFILE "E:sgdba mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.