Backup & Recovery :: Restore DB From Control Files Using Symantec Backup Exec
Jun 10, 2013
I am having a issue, we are trying to restore our db from control files using Symantec Backup exec, but job fails giving me error go to table spaces select all table spaces and unchecked roll forward.
i am unable to find way to uncheck the table spaces. Here is the complete description.
Cause
The system catalog tablespace "syscatspace" contains all of the system catalog information for the tables. Syscatspace needs to be rolled forward first, and then the other tablespaces must be rolled forward.
Solution
Workaround:
When the restore operation is run from a tablespace level backup, perform the rollforward for the syscatspace tablespace first and then for other tablespaces.
Execute the rollforward operation as a DBA operation. The sequence of the recovery process should be as follows:
1. Select all tablespaces, uncheck the rollforward option and run the restore job.
2. Run the rollforward operation as a DBA initiated operation:
rollforward syscatspace to point in time / end of logs. e.g. db2 => rollforward database UEXIT to end of logs and complete Tablespace (SYSCATSPACE) online
3. Perform rollforward of all other tablespaces.
e.g. db2 => rollforward database UEXIT to end of logs and complete tablespace (SYSTOO LSPACE,USERSPACE1) online
Refer to IBM DB2 documentation for more information on DBA-initiated operations.
View 9 Replies
ADVERTISEMENT
Feb 13, 2012
I had a database on an old P4 running but the motherboard got fried. I was able to recover all the data files (.ctl and *.dbf) plus the redo logs (.log). There is no export or backup taken - I have old ones, but I need to recover the latest which only existed in the data files.
I now have Oracle installed on a new P5 machine and was wondering if it is possible to use these data files in the new database? If so, how do I go by restoring the data files?
Both the P4 and P5 where running Red Hat Linux.
View 3 Replies
View Related
Mar 29, 2011
I've got a legacy SAP system with oracle 8i on Tru64. No changes at all are made but for legal reasons we have to keep it up and running.
we currently do a full backup monthly by shutting down oracle and doing a backup of all the files to tape and that takes around 12 hours.
If I stop doing the full backup and I only backup the control file and the archived redo log files every month and I had to restore the full database years from now, would I be able to restore the database using the last full monthly backup and use the latest control file and archived redo log files?
View 5 Replies
View Related
Feb 10, 2011
I take hot backup of database at 10:00 am.After taking the hot backup 50 archived logs are created.Out of 50 i have backed up first 25 of them and at 5:00pm i lose complete database including control,data and the last 25 archived log files that were not backed up.So I am using latest hot backup to recover
I restore the control file backup and datafile backup taken during ho tbackup(10 am) and i issue the command
.......startup mount
>>>>>>>Recover database until cancel
!!!!!!! Apply the available 25 archive logs
then i give "cancel" since I dont have the next redo log .Now in which mode will the database open(Reset logs or no reset logs)
View 6 Replies
View Related
Dec 9, 2011
I want to restore control file from backup set,just as the flowing command,where location does the control file be restored to? how can i specify the location when restore control file?
restore controlfile from '/u01/rman_backup/mybak/df_768589733_7_1.bak';
View 2 Replies
View Related
Jan 26, 2012
I have an oracle autoback of controlfile and spfile. I am trying to restore the production database using this backup, into a new server with a different directory structure.
I have completed the following steps in the restore process.
1. Creating a pfile from spfile
2. Changing the the location of cdump, udump, bdump and the control files ( there are three )
3. Then creating a spfile from this pfile
I am stuck on the next step where to rename all the datafiles and tempfile and restore the database. Following is what I did.
After mounting the database in RMAN, tried to run the following.
RMAN> run
2> {
3> allocate channel c1 device type disk
4> ;
5> @/home/oracle/rman_scripts/newloc.rman
6> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/dorian/system01.dbf';
7> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/dorian/undotbs01.dbf';
8> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/dorian/sysaux01.dbf';
9> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/dorian/users01.dbf';
[code]....
I am getting the following error message.
Starting restore at 25-JAN-2012 21:26:48
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2012 21:26:49
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 30
RMAN-06100: no channel to restore a backup or copy of datafile 29
RMAN-06100: no channel to restore a backup or copy of datafile 28
[code]....
View 14 Replies
View Related
May 8, 2013
Is it possible to recover files from backup tapes which are gone obsolete (as per retention policy)?
View 4 Replies
View Related
May 17, 2012
In order for the following command to work:
> recover database using backup control file until cancel;
what command must precede it, is it:
> alter database backup control file to trace;
View 4 Replies
View Related
Feb 26, 2012
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
View 1 Replies
View Related
Feb 9, 2011
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies
View Related
Jun 21, 2011
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
View 6 Replies
View Related
Nov 7, 2010
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies
View Related
Feb 13, 2012
I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
View 2 Replies
View Related
Dec 13, 2011
can we restore database from obsolete backup using rman
View 2 Replies
View Related
Jan 31, 2011
I am trying to create my database on a new server using rman incremental hot backups.
I have already restored and recovered my level 0 database on new server, but i am not able to restore/recover the level 1 backup on the new server. I have transported level 1 backup irom the old server to the new one. Do i need to recover lvl 1 bkp only or restore it also.
View 1 Replies
View Related
Aug 1, 2012
I need to restore entire database(sp+control+datafile) to new host.I have started the instance with nomount( and it has created a dummy parameter file).Now, I need to fire the command to restore spfile.
RUN
{
ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='...';
RESTORE SPFILE TO PFILE '?/oradata/test/inittrgta.ora' FROM AUTOBACKUP;
SHUTDOWN ABORT;
}
My questions:-
1.How will RMAN find the location of backupset(Since there is controlfile for neither target or catalog database)?
2.How does RMAN reache the backupset in case of a)tape b)disk?
View 4 Replies
View Related
Mar 27, 2012
I have been updating data in my database by adding numerous rows and assume the insertion of rows started from 1st date of january month.
I have been entering somehow or the other part of data every day.And now the date is 25th of january.
How can i take a partial backup of my database of the transactions done between 15th of January to 20th of January Month
How to take Backup of a particular date say it be 12th of january month.
How to take backup of first 10 days i.e., 1st-10th of january.
View 7 Replies
View Related
Jan 31, 2011
n my last post I asked abt the issues that I was facing while restoring the full backup of RMAN on a new server. I mentioned the steps as well, Now my Question is what If I want to restore the incremental backup on the new server?
What all steps do I have to follow after restoring the zero level backup on a new server.
View 18 Replies
View Related
May 13, 2012
my restore scenario bellow.
I have hot full backup that processed by NetBackup Policy. the backup policy are;
1.Full backup database in Monday. Daily_Monday_RMAN <- 1 volume pool=1 media
2.Full backup database in Tuesday .Daily_Tuesday_RMAN <- 1 volume pool=1 media
3.Full backup database in Wednesday. Daily_Wednesday_RMAN <- 1 volume pool=1 media
4.Full backup database in Thursday. Daily_Thursday_RMAN <- 1 volume pool=1 media
5.Full backup database in Friday. Daily_Friday_RMAN <- 1 volume pool=1 media
6.Full backup database in Saturday. Daily_Saturday_RMAN <- 1 volume pool=1 media
How to restore database from one of medias?
View 5 Replies
View Related
Dec 2, 2011
I ran the Full database backup as,
RUN {ALLOCATE CHANNEL CH0 TYPE 'sbt_tape';
BACKUP DATABASE FORCE PLUS ARCHIVELOG FORCE NOT BACKED UP DELETE INPUT;
RELEASE CHANNEL CH0;
}
Then I ran the restore, it failed with Quote:RMAN-06054: media recovery requesting unknown archived log....
When I backup archivelogs and choose to delete the input, it does not delete the multiplexed copy, but the specific file being backed up.So, ideally it should find it in Flah Area or at least in the backed up pieces which are there with it.Still why is it failing?
Also, in recovery, it is deleting the archived log after applying, RMAN does this if we use recover... delete archivelog command.I am using only RECOVER, still in output I can see RMAN deleting the log after it has applied it. WHY?
View 3 Replies
View Related
Sep 7, 2012
i want to clone the test db to dev db but i dont want default users and tablespaces(SYS,SYSAUX,...) in the test db datapump and exp are not working, then contacted ORACLE support and they concluded that test db sysaux was corrupted.i took RMAN all tablespace bkup except default tablespaces. then created new database using DBCA and now i want to restore and recover all those test db tablesapces but while i'm doing restore its saying
RMAN> restore tablespace MAIN_DATA;
Starting restore at 07-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=129 device type=DISK
creating datafile file number=20 name=/opt/oracle/oradata/DEV71/main_data01.dbf
restore not done; all files read only, offline, or already restored
Finished restore at 07-SEP-12
i created all tablespaces in dev same as test db,
View 6 Replies
View Related
Sep 27, 2011
Suppose I take a multi stream backup, say 3 streams.
So if a control file is backed up in say backup set 1, so is the whole control file is backed up in one backup piece or it may span multiple pieces?
A backup set may have multiple backup pieces.
View 2 Replies
View Related
Jul 11, 2012
I want to ask if I restore a control file from backup of say day2 and I recover till day1 using RMAN script, then what will be the state of my database? I mean day2 control file may be having SCN-Day2, and I am instructing RMAN to recover till past point in time that is SCN-Day1.
View 3 Replies
View Related
Sep 18, 2012
On my stand by DB when I run the following command I get this error:
Is this line really needed based on my run block?
run
{
sql 'ALTER DATABASE BACKUP CONTROLFILE TO TRACE';
allocate channel t1 type 'SBT_TAPE'
[Code]....
View 4 Replies
View Related
Dec 13, 2011
This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
View 1 Replies
View Related
Apr 3, 2013
I am trying to backup my control on a STBBY DB(RAC) and I am getting the ollowing error.
ORA-00245: control file backup failed; target is likely on a local file system
what the issue is? Note the FS is ACFS and can see on all my nodes
show all;
using target database control file instead of recovery catalog
RMAN configuration parameters for database with db_unique_name PA01INS_IM3L059B are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
[code]...
ACFS file system
df -h /share/dbbkup/oracle/PA01INS/rman
Filesystem Size Used Avail Use% Mounted on
/dev/asm/pa01ins-33 75G 2.6G 73G 4% /share/dbbkup/oracle/PA01INS
rman cmdfile=control.rman
[code]...
View 2 Replies
View Related
May 28, 2012
taking the backup of a control file, as i am taking online backup, archive mode.
At first i have executed the statement
sql> alter database backup control file to trace;
then i have removed the control files and enterd some data in a table and committed it.As my oracle is not shutting down, so i shut aborted it. Now after saving the last file from the udump as obkp.sql i am unable to edit this file and use.
how to edit and use this file, so that i can startup my database normally.
View 4 Replies
View Related
Jan 5, 2012
When i issue this command ,how many times to backup controlfile?
RMAN> BACKUP CURRENT CONTROLFILE INCLUDE CURRENT CONTROLFILE;
Is there difference between 'BACKUP CURRENT CONTROLFILE INCLUDE CURRENT CONTROLFILE' and 'BACKUP CURRENT CONTROLFILE'?
View 2 Replies
View Related
Jun 14, 2013
I would like get a copy of an oracle 10g database off the production server(windows 2003) and set it up on Windows 2003 virtual server to use for dev/testing.
What would be the safest and most efficient way.??
View 2 Replies
View Related
Nov 7, 2012
We need to migrate database from old machine to new machine. This is because our SAN storage need to be change due to file system.
Old machine setup with RAC and using 10g. Is it possible i restore at single machine only? The backup on the NAS. SAN act as ASM only.
View 1 Replies
View Related
