Backup & Recovery :: Possible To Maintain Real Time Backup Using RMAN?
Mar 16, 2011Is it Possible to Maintain real Time Backup using RMAN ?
View 39 Replies
ADVERTISEMENT
Backup & Recovery :: Good Practice To Maintain RMAN Catalog
Oct 17, 2012What is the good practice to maintain RMAN catalog ?
RMAN backup and recovery is fine but to delete old backups it takes a lot of time.
Even if I delete backups manually,RMAN takes a lot of time to delete expired backup command.
What can be done to increase the speed of delete obsolete backup and delete expired backup operations ?
Backup & Recovery :: RMAN Duplicate Set Until Time Using Wrong Backup Piece Name To Restore?
Feb 26, 2012We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
Backup & Recovery :: RMAN - Time Interval Backup And Restore?
Mar 27, 2012I have been updating data in my database by adding numerous rows and assume the insertion of rows started from 1st date of january month.
I have been entering somehow or the other part of data every day.And now the date is 25th of january.
How can i take a partial backup of my database of the transactions done between 15th of January to 20th of January Month
How to take Backup of a particular date say it be 12th of january month.
How to take backup of first 10 days i.e., 1st-10th of january.
Backup & Recovery :: SCN Based Backup Do RMAN Generate Backup From Archivelogs
Oct 18, 2012understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies View RelatedBackup & Recovery :: 2 Separate RMAN Backup One Backup Is Of Only Datafile
Jan 24, 2011I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
Backup & Recovery :: RMAN Command Hang Long Time?
Mar 20, 2012We would take backup regulary by RMAN(catalog). Last two days we could not take backup. Backup start but after take backup some datafile then rman does not do anything.
View 4 Replies View RelatedBackup & Recovery :: RMAN Recovery Failing With Incremental Level 0 Backup
Feb 10, 2011We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
Backup & Recovery :: ORA-01655 On CREATE USER (splitted From RMAN Backup Error)
Dec 22, 2012I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
Backup & Recovery :: RMAN Full Backup Failing When Backing Up Temp File?
Jan 28, 2011I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
Backup & Recovery :: Restore Dropped Or Wrongly Updated Table Using RMAN Backup?
Feb 9, 2011Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedBackup & Recovery :: RMAN Script Delete The Backup Pieces Older Than 2 Days
Jan 8, 2013Is this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
Backup & Recovery :: Does Full Cold Backup Of RMAN Include Online Redologs
Jan 8, 2013Does the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
Backup & Recovery :: Check Current Value For Limit Channel In Rman Backup?
Mar 19, 2009Would like to check how do we check the current value for limit channel in rman backup..
eg set limit channel d1 kbytes 2024800;
Backup & Recovery :: Configured Tivoli And Getting Error While Execute RMAN Backup
Nov 17, 2012We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database
[code]....
Backup & Recovery :: RMAN Backup Fails On Windows When Using Batch File?
May 3, 2011I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
Backup & Recovery :: Restore RMAN Backup In New Server / Got Error 06172
Jun 21, 2011We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
Backup & Recovery :: Tape Streaming Not Happening While Performing RMAN Backup
Oct 29, 2011Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?
A.Configure backup optimization
B.Configure the channel to increase MAXOPENFILES
C.Configure the channel to increase the capacity with the RATE parameter
D.Configure the channel to adjust the tape buffer size with the BLKSIZE option
Inputs On RMAN Backup N Recovery For Multiple Restore Of Clean Backup?
Nov 7, 2010We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View RelatedBackup & Recovery :: Identify Particular Archive-log File Have Backup Or Not From RMAN Catalog?
May 30, 2012How can be identify a particular archive-log file have backup or not from rman catalog?
View 2 Replies View RelatedBackup & Recovery :: Database Size Is 30GB Is It Recommended For RMAN Backup
May 22, 2012database size is 30GB is it recommended for RMAN backup
View 2 Replies View RelatedBackup & Recovery :: RMAN Control File Auto Backup Error?
Dec 13, 2011This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
Backup & Recovery :: Restore Rman Backup On New Server As Different Name Sid / Service / Listener
Feb 13, 2012I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
Backup & Recovery :: Restore Database From Obsolete Backup Using RMAN
Dec 13, 2011can we restore database from obsolete backup using rman
View 2 Replies View RelatedBackup & Recovery :: RMAN 03009 / ORA 03113 - Error On Backup To S3
Jul 19, 2013I am running Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I ran the following commands in RMAN:
RMAN>
connect target /
CONFIGURE COMPRESSION ALGORITHM 'MEDIUM' ;
set encryption identified by 'xxxx' only;
run {
[code]...
I get the follwing error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/19/2013 06:57:4
ORA-03113: end-of-file on communication channel
[code]...
Backup & Recovery :: Deferred Segment Management / RMAN Backup
Jul 28, 2011We all know about the new feature introduced in Oracle 11g ie. "Deferred Segment Space management" in which there in no segment allocated to table which is empty, which means that only the data is going to be inserted in the table the first segment is going to be allocated.
I created a user assigned a default tablespace to it, created 3 tables, two of them having data and 1 empty table.
When I did export using the export utility, I found that the empty table was not included however the same situation contradicted when I did the export using "EXPDP".
I want to know is the something of tables missing in export happen in RMAN backup of the tablespace which I have assigned to that user.
Backup & Recovery :: RMAN Backup Empty Block From Datafiles?
Apr 27, 2012Does change in segment size effect the rman backup size..??
I'm trying to understand do Rman backup the empty block from datafiles..?? And if it escape the empty block than inserting data in tables (increasing the number of used block) might change the size of total backup (Rman) size
Backup & Recovery :: How To Setup Database For Automated RMAN Backup
Mar 14, 2012How to setup the database for automated RMAN backup. like if we want to have a backup exactly at 8:00 PM IST. So how to configure it.
View 6 Replies View RelatedBackup & Recovery :: How To Configure RMAN For Specific Backup Strategy
Jan 11, 2012We have production database.We would like to have 15 last online full backups (sheduled once a day) and to be possible to restore database to a point in time only between last backup and current time.
If I configure retention window for 15 days, archive redo logs in last 15 days are also backed up, and this consumes lot of space, which is a problem here (database files and arhive logs are of a huge size).(There is enough space for 15 full backups and archive log for one day though)
How to configure RMAN for this?I was thinking about configuring retention policy for 15 days and adding this lines at the and of a daily RMAN cronjob:
backup archivelog all not backed up;
CROSSCHECK BACKUP DEVICE TYPE DISK;
DELETE NOPROMPT ARCHIVELOG ALL;
Backup & Recovery :: Automating RMAN Backup Jobs In Windows
Jun 26, 2012My automated RMAN backup plan.
ShutdownDB1.bat
set oracle_sid = pldg
C:oracleproduct10.2.0insqlplus.exe /nolog @c:oraclebackupshutdowndb2.sql
ShutdownDB2.sql (called by the previous batch file)
set echo on
spool C:oraclebackupShutdownDB.log
connect /@pledgemaker as sysdba
shutdown immediate
spool off
exit
<Here there will be a thirty minute window or so while I XCOPY the Oracle Inventory and Oracle Home directories.>
RMANBackup1.bat
set oracle_sid=pldg
C:oracleproduct10.2.0BIN
man.exe target / cmdfile = 'c:oraclebackup
manbackup2.scr'
log = 'c:oraclebackupRMANBackup.log'
RMANBackup2.scr (called by the previous batch file)
startup mount
backup database
alter database open
exit